Rabbet Bit

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
  1. Rockler Rabbeting Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    Rockler Rabbeting Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. Sturdy 1/2" shank.

    15 Review(s)
    $39.99
  2. Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    …Joining boards and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted…

    From: $31.47
  3. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted…

    From: $31.97
  4. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    bits include a set of bearings, which are installed to achieve a range of rabbet depths. Use them for joinery applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.*

    2 Review(s)
    From: $42.47
  5. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99
  6. 1/4" Shank Rabbeting Bit Set

    1/4" Shank Rabbeting Bit Set

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. 1/4" shank.

    $44.99
  7. Rockler Rabbeting Router Bit Set - 1/2" Shank

    Rockler Rabbeting Router Bit Set - 1/2" Shank

    …bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features…

    1 Review(s)
    $49.99
  8. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    From: $14.49
  9. Freud® 54-760 Glass Panel Door Cutter - 1-11/16" Dia x 1/2" H

    Freud® 54-760 Glass Panel Door Cutter - 1-11/16" Dia x 1/2" H

    This cutter is made exclusively for routing rabbets for glass panel doors. It is precisely dimensioned to work with the arbor and cutters included with the Freud Premier Adjustable Rail and Stile Bit Sets (e.g. 37161, sold separately).

    $35.97
  10. Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    rabbet. * Steel pilots can be removed from bits and used with edge guides for wider rabbets. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers. * Rockler numbers 31421, 33592 include multiple bearings for multiple rabbeting

    $57.47
  11. Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Use this Straight Raised Panel Bit with Back Cutter (P636) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $142.99
  12. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Cut tight-fitting dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth…

    5 Review(s)
    $59.99
  13. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  14. 4210 Porter-Cable 12'' Dovetail Jig

    4210 Porter-Cable 12'' Dovetail Jig

    This well-built, straightforward jig allows for cutting half-blind, rabbeted half-blind, and sliding dovetails. Its patented alignment lines and router bit depth stop improve accuracy and make setup quick and easy, while heavy duty cam-type clamps with sandpaper-backed locking bars hold the…

    2 Review(s)
    $136.49
  15. Freud® 99-470 Reversible Wainscoting Router Bit - 1-1/2" Dia x 7/16" H x 1/2" Shank

    Freud® 99-470 Reversible Wainscoting Router Bit - 1-1/2" Dia x 7/16" H x 1/2" Shank

    Works with stock from 1/2" to 5/8" thick and mills matching frame joints with remarkable ease and precision. Bit height is set one time for male and female joints without requiring fence or height adjustments. Just rout stiles face down and rails face up for a perfect fit. If you want to install…

    $44.97
  16. Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow box case, which can hang on the wall or mount on the bench to keep your bits safe and within easy reach. Bits

    2 Review(s)
    $220.47
  17. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  18. Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    …the bits and protect the cutting edges. Includes five carbide-tipped bits:* Rabbeting bit with four bearings (#91595) for 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets* 3/4" dia. x 1" long straight bit, 2-fluted (#90638)* 3/8" radius x 5/8" high roundover bit (#29083)* 45° x 1/2" high chamfer bit

    $149.99
  19. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados.* Patented alignment lines and router bit depth stop allow for quick, easy set-up* Handles stock from 1/4" to 1-1/8" thick and up to 12" wide* Comes with easy-to-mount, heavy-duty steel base;…

    $187.99
  20. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    From: $13.99
  21. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  22. Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To…

    5 Review(s)
    $44.99
  23. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …also helps to strengthen the joint over a basic rabbet or butt joint. Machining parts with the Lock Miter Bit is easy with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts,…

    From: $57.99
  24. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces. * Cuts both straight and arched top door panels.* Cuts the profile on the front, and the rabbet on the back…

    0 Review(s)
    $142.99
  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
Feedback X