Rabbeting Router Bits

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
  1. Rabbeting Router Bit

    Rabbeting Router Bit

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. Sturdy 1/2" shank.

    15 Review(s)
    $39.99 $27.99

    SAVE 30%

  2. Freud Rabbeting Bits With Bearings

    Freud Rabbeting Bits With Bearings

    …feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    2 Review(s)
    From: $42.47
  3. Freud Rabbeting Bits With Bearings - 1/4'' Shank

    Freud Rabbeting Bits With Bearings - 1/4'' Shank

    …and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.47
  4. Rockler Rabbeting Bit Set

    Rockler Rabbeting Bit Set

    …bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features…

    1 Review(s)
    $49.99
  5. Freud Rabbeting Bits

    Freud Rabbeting Bits

    …such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.97
  6. Freud # 99-470 Reversible Wainscoting Bit, 1-1/2'' Dia. x 7/16'' H x 1/2'' Sh.

    Freud # 99-470 Reversible Wainscoting Bit, 1-1/2'' Dia. x 7/16'' H x 1/2'' Sh.

    …in the field of the wainscoting, use 3/4" stock: First rout the matching profiles in the rails and stiles, then rout a rabbet on the back to accept the tongue of the raised panel. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on handheld and table-mounted portable routers.

    $44.97
  7. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow box case, which can hang on the wall or mount on the bench to keep your bits safe and within easy reach. Bits

    2 Review(s)
    $220.47
  8. Freud 54-760 Glass Panel Door Cutter

    Freud 54-760 Glass Panel Door Cutter

    This cutter is made exclusively for routing rabbets for glass panel doors. It is precisely dimensioned to work with the arbor and cutters included with the Freud Premier Adjustable Rail and Stile Bit Sets (e.g. 37161, sold separately).

    $35.97
  9. Rockler Drawer Lock Router Bit

    Rockler Drawer Lock Router Bit

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99 $26.59

    SAVE 30%

  10. 1/4" Shank Rabbeting Bit Set

    1/4" Shank Rabbeting Bit Set

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. 1/4" shank.

    $44.99
  11. Rockler 5-Pc. Starter Bit Set

    Rockler 5-Pc. Starter Bit Set

    With two joinery bits for basic dados and rabbets, plus three bearing-guided edge profiling bits, this five-piece router bit set will cover the bases for both solid structure and visual embellishment. All bits have 1/2" shanks to reduce chatter and provide maximum performance. A convenient storage…

    $149.99
  12. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    …diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises. These precision balanced router bits are made from top…

    $54.99
  13. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    Cut tight-fitting dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth…

    5 Review(s)
    $59.99
  14. 45° Lock Miter Router Bit

    45° Lock Miter Router Bit

    The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased…

    19 Review(s)
    $74.99
  15. 1-1/16" Diameter X 3/4" High Drawer Lock Bit

    1-1/16" Diameter X 3/4" High Drawer Lock Bit

    This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To…

    5 Review(s)
    $44.99
  16. Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  17. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  18. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    From: $13.99
  19. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  20. 1/8'' Double Flute Straight Bit

    1/8'' Double Flute Straight Bit

    This versatile cutter does a staggering amount of work. It can rout dadoes and rabbets, cut grooves for inlays, rout mortises (both for hinges and tenons), flatten or shape panels, rout specially shaped holes and cleanly cut round holes, and shape and duplicate parts with a template. Plus, you'll…

    2 Review(s)
    $20.99 $14.69

    SAVE 30%

  21. 4210 Porter-Cable 12'' Dovetail Jig

    4210 Porter-Cable 12'' Dovetail Jig

    This well-built, straightforward jig allows for cutting half-blind, rabbeted half-blind, and sliding dovetails. Its patented alignment lines and router bit depth stop improve accuracy and make setup quick and easy, while heavy duty cam-type clamps with sandpaper-backed locking bars hold the…

    2 Review(s)
    $136.49
  22. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    …arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    0 Review(s)
    $142.99
  23. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …handle for excellent control and comfortable grip.* Post handle hold-down clamp allows for quick repositioning.* When using the Coping Sled for the first time, your bit will be cutting a small rabbet in the phenolic base. This is normal and required to minimize tear-out for all future cuts.

    116 Review(s)
    $59.99 $49.99

    SAVE 17%

  24. Ogee Raised Panel Bit with Back Cutter P605

    Ogee Raised Panel Bit with Back Cutter P605

    …panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the finest grade K20 tungsten carbide,…

    $137.79 $103.34

    SAVE 25%

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
Feedback X