Radius Tool

  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
  1. Beam Compass

    Beam Compass

    …way with the beam compass. No measuring or ruler needed. The built-in locking tape rule makes set up a breeze. Gauge slides along work for edge marking. The beam compass allows you to draw a 3-1/2 inch to 72 inch radius. Technical Details:* 2mm lead* Lead and holder included* 3-1/2" to 72" radius

    2 Review(s)
    $36.99
  2. Rockler Bullnose Radius Bits

    Rockler Bullnose Radius Bits

    Our Bullnose Radius Bits cut a perfect half-round profile for a variety of stock widths. Unlike quarter round bits, these will not leave a flat in the middle of the stock, and you can complete the profile in a single pass. You can leave the edge perfectly smooth, or select a bit that is sized to…

    From: $29.99
  3. Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Get a consistent edge and easy-to-use operation with this radius plane that cuts a clean rounded edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  4. Full Size Square Radius Carbide Turning Tool

    Full Size Square Radius Carbide Turning Tool

    …frustration of dull tools. Since you don't need to invest hundreds of dollars into sharpening equipment, they're also an excellent value. Features:* Excellent for smoothing cuts and convex surfaces.* Replaceable Sr2 cutter measures approximately 0.60'' square with a 2'' convex radius on all 4…

    $99.99
  5. Square Radius Carbide Mini Turning Tool

    Square Radius Carbide Mini Turning Tool

    This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2'' radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it…

    $69.99
  6. Flexcut® Radius Knife

    Flexcut® Radius Knife

    The Flexcut Radius Knife features a blade with an outside curve and a sharp bevel for making push cuts, slice cuts and v-shaped cuts. The skewed curvature of the bevel allows for a rolling action, as well as different angles of approach. The knife can be held with a pencil grip or a conventional…

    $24.99
  7. Freud 36-119, 3/16'' Radius Beading Bit

    Freud 36-119, 3/16'' Radius Beading Bit

    …this quality Freud® edge forming router bit! Round over profile with steps on either side is ideal for decorative work.* 3/16" roundover radius.* 2-1/2" overall length.* Add an attractive bead profile to furniture and millwork.* Cuts all composition materials, plywoods, hardwoods, and…

    $32.97 $19.99

    SAVE 39%

  8. Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Get a consistent edge and easy-to-use operation with this chamfer plane that makes an attractive beveled edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  9. Full Size Square Radius Carbide Replacement Cutter - Sr2

    Full Size Square Radius Carbide Replacement Cutter - Sr2

    …with a 2'' convex radius on all 4 edges. * Solid carbide for a long life. * Factory sharpened - ready for use right out of the box. * Note: This cutter is not compatible with a standard square turning tool. Use it with the Full Size Square Radius Carbide Turning Tool only (48535, sold separately).

    $19.99
  10. 3/8' and 1/2' Radius Double Cutter Router Bit

    3/8' and 1/2' Radius Double Cutter Router Bit

    …to deliver smooth, efficient cutting. Cutters can be reversed on the shank, giving you 3/8" and 1/2" radius cutting options. You can even cut a board with one radius on the top and the other radius on the bottom! Works well for decking and outdoor furniture such as Adirondack chairs. Bits are also…

    $95.39
  11. Freud # 41-502 1/16'' Radius Laminate Trim Router Bit, 1/4'' Shank

    Freud # 41-502 1/16'' Radius Laminate Trim Router Bit, 1/4'' Shank

    This Laminate Trimming Router Bit from Freud trims plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16" radius gives you a silky smooth edge with no burrs or sharp spots. It's ideal for countertop-grade laminates including Formica®, Wilsonart® and…

    $29.47
  12. Carbide Pen Turning Tool 3-Piece Set

    Carbide Pen Turning Tool 3-Piece Set

    …it's slight radius helps reduce the risk of gouging.* Use the 1/8" parting tool for parting off, and for creating grooves.* Carbide cutters are not interchangeable between the different tools.* When replacing the carbide insert for the Radius Square Cutter, use SR1 (47377) only. This tool will not…

    1 Review(s)
    $129.99
  13. Square Carbide Pen Turning Tool Replacement Cutter - Sr1

    Square Carbide Pen Turning Tool Replacement Cutter - Sr1

    …replace the cutter when needed. * 2" radius for smooth finishing cuts.* Solid carbide for a long life.* Measures 1/2" x 1/2".* Factory sharpened—ready for use right out of the box.* Note: this carbide cutter is not compatible with a standard square turning tool. Use it with the handle included…

    $19.99
  14. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    …T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges Best Used With: Tormek T-7…

    $66.00
  15. EZ-RJ45 Cat. 6 Connector & Strain Relief

    EZ-RJ45 Cat. 6 Connector & Strain Relief

    …well as 30 strain reliefs, which can be used to meet cat. 6 bend radius requirements. * Simplified terminations provide proper wiring order verification* Strain reliefs secure cat. 6 bend radius requirements* Manufacturer: Platinum Tools For use in cat. 6-compliant data networks, the EZ-RJ45 Cat. 6…

    $30.99
  16. Round Over/Beading Bit Set - 1/4" Shank

    Round Over/Beading Bit Set - 1/4" Shank

    …router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes 1/8", 1/4" and 3/8" radius bits. 1/4" shank bits.

    $79.99
  17. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    …jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal for softening the edges on full sized furniture. Smooth rolling 8mm bearing…

    2 Review(s)
    $19.99
  18. Home Series Log Tenon Cutters

    Home Series Log Tenon Cutters

    …aircraft aluminum for maximum precision and minimum weight, these tenon cutters feature dual blades made of hardened steel and a self centering design to produce perfectly shaped radius shoulder tenons. Dual blades not only cut twice as fast, but also generate less heat for long-lasting service.

    4 Review(s)
    From: $109.00
  19. Rockler 5-Pc. Starter Bit Set

    Rockler 5-Pc. Starter Bit Set

    …bits:* Rabbeting bit with four bearings (#91595) for 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets* 3/4" dia. x 1" long straight bit, 2-fluted (#90638)* 3/8" radius x 5/8" high roundover bit (#29083)* 45° x 1/2" high chamfer bit (#91551)* 5/32" radius x 15/32" high Roman ogee bit (#91628)

    $149.99
  20. Freud Quadra-Cut Table Top Classical Bold Bit

    Freud Quadra-Cut Table Top Classical Bold Bit

    …a strong, uplifting edge for table tops and other edge profiles. It is generously dimensioned with a large 25/64" roundover radius and a smaller 11/64" cove radius to create a bold effect on furniture of all types. It features Freud's exclusive Quadra-Cut™ 4-cutter design, which provides…

    $67.47
  21. Laguna ProForce Bandsaw Blade, 1/4'' x 115'', 6 TPI

    Laguna ProForce Bandsaw Blade, 1/4'' x 115'', 6 TPI

    …Steel, the ProForce is a premium blade designed for longer life and better performance than traditional carbon steel blades. Use the 1/4'' blade for cuts with a minimum radius of 5/8''. ProForce blades are individually inspected for quality, and backed by a 1-year manufacturer's warranty.

    $28.75
  22. Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    …Shank (C): 1/2"* Radius (R): 1/8"* Overall Height: 2-1/2" Freud #: 34-120* Overall Diameter (A): 1"* Carbide Height (B): 1/2"* Shank (C): 1/2"* Radius (R): 1/4"* Overall Height: 2-1/2" Freud #: 34-124* Overall Diameter (A): 1-1/4"* Carbide Height (B): 5/8"* Shank (C): 1/2"* Radius (R): 3/8"* Overall…

    $117.97
  23. Scroll Saw Blades-Scroll Blades

    Scroll Saw Blades-Scroll Blades

    …For work with wood, plastic and fibrous materials. 52712 is for extremely intricate sawing, 99516 is for right radius work in thin 3/32" to 1/8" materials, and 52746 is for close radius cutting in material 1/8" or thicker. Technical Details* Size #2/0 (52712) blades are .022" wide with .010" kerf…

    1 Review(s)
    From: $5.59
  24. Olson® MachSpeed™ Scroll Saw Blades

    Olson® MachSpeed™ Scroll Saw Blades

    …Thick* For accurate, tight radius cuts in hard/soft wood 3/16" or thicker. 27115 No. 5R, 13 TPI, 7 Rev.* 0.038" Wide* 0.016" Thick* For steady, close radius cuts in hard/soft wood 1/4" or thicker. 22455 No. 7R, 8 TPI, 6 Rev.* 0.046" Wide* 0.017" Thick* For fast, close radius cuts in hard/soft wood…

    From: $7.39
  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X