Radius Edge

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
  1. Plastic T-Molding Edging-3/4" Wide x 12' Long

    Plastic T-Molding Edging-3/4" Wide x 12' Long

    …and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different colors;Black, Brown, White,…

    23 Review(s)
    $17.99
  2. 3/8' and 1/2' Radius Double Cutter Router Bit

    3/8' and 1/2' Radius Double Cutter Router Bit

    …on both edges of stock simultaneously! These cutters will save you time and help you get more done with fewer router passes. Two double carbide cutters are ground with 800 grit diamond wheels to deliver smooth, efficient cutting. Cutters can be reversed on the shank, giving you 3/8" and 1/2" radius

    $95.39
  3. Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Get a consistent edge and easy-to-use operation with this chamfer plane that makes an attractive beveled edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  4. Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Get a consistent edge and easy-to-use operation with this radius plane that cuts a clean rounded edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  5. Rockler Bullnose Radius Bits

    Rockler Bullnose Radius Bits

    Our Bullnose Radius Bits cut a perfect half-round profile for a variety of stock widths. Unlike quarter round bits, these will not leave a flat in the middle of the stock, and you can complete the profile in a single pass. You can leave the edge perfectly smooth, or select a bit that is sized to…

    From: $29.99
  6. Full Size Square Radius Carbide Turning Tool

    Full Size Square Radius Carbide Turning Tool

    …four edges is slightly crowned with a 2'' radius. This subtle change makes the cutter excellent for smoothing cuts. The replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all edges have grown…

    $99.99
  7. Freud 36-119, 3/16'' Radius Beading Bit

    Freud 36-119, 3/16'' Radius Beading Bit

    Cut with confidence with this quality Freud® edge forming router bit! Round over profile with steps on either side is ideal for decorative work.* 3/16" roundover radius.* 2-1/2" overall length.* Add an attractive bead profile to furniture and millwork.* Cuts all composition materials, plywoods,…

    $32.97 $19.99

    SAVE 39%

  8. Square Radius Carbide Mini Turning Tool

    Square Radius Carbide Mini Turning Tool

    This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2'' radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it…

    $69.99
  9. Full Size Square Radius Carbide Replacement Cutter - Sr2

    Full Size Square Radius Carbide Replacement Cutter - Sr2

    …at the edge of this carbide insert and you'll realize it's not actually square. Instead, each of its four edges is slightly crowned with a 2'' radius. This subtle change makes the cutter excellent for smoothing cuts. No sharpening required - just rotate to a new edge when the previous edge gets…

    $19.99
  10. Table Top Edge Router Bit

    Table Top Edge Router Bit

    …round over that softens and beautifies table edges and moldings. You can set it to rout a small shoulder on the face of the workpiece, or to rout flush for a smooth round over. The deepness of the profile results in a very smooth transition from radius to face. Top quality bits that meet the high…

    $42.99
  11. Freud Round-Over Table Edge & Handrail Bits

    Freud Round-Over Table Edge & Handrail Bits

    …attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both edges to…

    1 Review(s)
    $102.97
  12. Freud # 41-502 1/16'' Radius Laminate Trim Router Bit, 1/4'' Shank

    Freud # 41-502 1/16'' Radius Laminate Trim Router Bit, 1/4'' Shank

    This Laminate Trimming Router Bit from Freud trims plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16" radius gives you a silky smooth edge with no burrs or sharp spots. It's ideal for countertop-grade laminates including Formica®, Wilsonart® and…

    $29.47
  13. 6° Radius Pad for Festool Duplex LS 130 EQ Linear Sander

    6° Radius Pad for Festool Duplex LS 130 EQ Linear Sander

    For sanding outside edges.

    $35.00
  14. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    …Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges Best Used With:…

    $66.00
  15. Table Edge/Handrail Router Bit

    Table Edge/Handrail Router Bit

    …routed on both edges to put a smooth convex contour on the top face of the handrail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. When used as a table edge bit, it routs an elegant, elongated radius. You can set it deeper,…

    $74.99
  16. Wine Lattice

    Wine Lattice

    …at joints for stability. Screw wine glass molding to the bottom side of a shelf to suspend your wine glasses and goblets.* 3/4" Thick x 7/16" Wide hardwood, radiused edges. * Red oak.* Molding is sold by the piece. See our Split Dowel Molding or Split Rope Molding offer for this decorative trim.

    5 Review(s)
    From: $88.99
  17. Plastic T-Molding Edging-3/4" Wide x 100' Long

    Plastic T-Molding Edging-3/4" Wide x 100' Long

    …and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different colors;Black, Brown, White,…

    23 Review(s)
    $43.99
  18. Plastic T-Molding Edging-13/16" W x 12' Long

    Plastic T-Molding Edging-13/16" W x 12' Long

    …and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different colors;Black, Brown, White,…

    23 Review(s)
    $15.49
  19. Plastic T-Molding Edging-13/16" Wide x 100' Long

    Plastic T-Molding Edging-13/16" Wide x 100' Long

    …and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different colors;Black, Brown, White,…

    23 Review(s)
    $47.99
  20. Freud Rounding Over Router Bit (34-118)

    Freud Rounding Over Router Bit (34-118)

    Freud's Rounding Over Router Bits are ideal for softening furniture edges and creating decorative rounded edges. The bit can set to cut a simple radius, or lowered to cut a beaded edge. Freud round over bits cut through all composition materials, plywoods, hardwoods, and softwoods. They feature…

    $32.47
  21. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    …and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal for softening the edges on full sized furniture. Smooth rolling 8mm bearing ensures burn-free…

    2 Review(s)
    $19.99
  22. Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.

    Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.

    Use this 1/4" radius coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide…

    $34.97
  23. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  24. Full Bead Router Bit

    Full Bead Router Bit

    …into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.

    $49.99
  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
Feedback X