Raised Panel Door Bits

  • Items 1 - 24 of 51
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud 3-Piece Door Set 97-156

    Freud 3-Piece Door Set 97-156

    …a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Quadra-Cut Bevel Raised Panel Bit.

    0 Review(s)
    $195.97
  2. Raised Panel Router Bit - Straight - Horizontal

    Raised Panel Router Bit - Straight - Horizontal

    …horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors. Sometimes called Shaker panel raisers, these…

    4 Review(s)
    From: $64.99
  3. Freud 97-252, 3-Piece Door Set

    Freud 97-252, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.

    2 Review(s)
    $183.47
  4. Raised Panel Router Bit - Ogee - Horizontal

    Raised Panel Router Bit - Ogee - Horizontal

    …horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured…

    2 Review(s)
    From: $64.99
  5. Round Rail and Stile Router Bit Set

    Round Rail and Stile Router Bit Set

    …this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece design of these bits allows you to achieve a…

    5 Review(s)
    $99.99
  6. Freud 97-158, 3-Piece Door Set

    Freud 97-158, 3-Piece Door Set

    bits work for any door 5/8" to 1-1/4" thick. The unique cutter geometry virtually eliminates tearout. Adjustable shims let you adjust the panel groove from 7/32" to 1/4" thick, enabling a tight fit when using plywood. Also includes a 3-1/2" diameter Cove Raised Panel Bit with back cutter. The panel

    1 Review(s)
    $195.97
  7. Straight Panel Bit with Back Cutter P636

    Straight Panel Bit with Back Cutter P636

    Use this Straight Raised Panel Bit with Back Cutter (P636) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $142.99
  8. Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    …allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers. Application: Producing panels from 3/4" stock that are flush with the door frame for a professional,…

    1 Review(s)
    $119.97
  9. Freud 97-260, 3-Piece Door Set

    Freud 97-260, 3-Piece Door Set

    …a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit with back cutter.

    $201.97
  10. Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    …This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.* Integrated caster system built into the cast iron base for instant shop mobility* Spindle height digital readout for making fine incremental…

    $3879.99
  11. Shaker Raised Panel 3-Piece Bit Set

    Shaker Raised Panel 3-Piece Bit Set

    …quality door bit set lets you cut both the cope and stick joints for the door frame, as well as the raised panel that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade…

    $209.99
  12. Freud Quadra-Cut™ Bevel Raised Panel Bits

    Freud Quadra-Cut™ Bevel Raised Panel Bits

    …You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as for beveling decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that…

    1 Review(s)
    From: $98.97
  13. Freud 97-250, 3-Piece Door Set

    Freud 97-250, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.

    $183.47
  14. Freud 97-150, 3-Piece Door Set

    Freud 97-150, 3-Piece Door Set

    …shims enable a tight fit when using plywood and also allow use with panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.

    $183.47
  15. Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    …this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels

    4 Review(s)
    $119.97
  16. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    Use this Cove Raised Panel Bit (P602) with its integral guide bearing to raise both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4"…

    0 Review(s)
    $142.99
  17. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    …You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward…

    2 Review(s)
    From: $104.47
  18. Raised Panel Router Bit - Ogee

    Raised Panel Router Bit - Ogee

    …you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy 1/2" shank ensure smooth, chatter-free cuts. Note: vertical panel raising bits cannot be used for cathedral-style or arched doors.

    2 Review(s)
    $54.99
  19. Raised Panel Router Bit - Straight

    Raised Panel Router Bit - Straight

    …you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy 1/2" shank ensure smooth, chatter-free cuts. Note: vertical panel raising bits cannot be used for cathedral-style or arched doors.

    4 Review(s)
    $54.99
  20. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    This panel raiser creates beautiful raised panels for doors and wainscot paneling, but can also be used to shape table tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings…

    1 Review(s)
    $98.97
  21. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    This ogee panel raiser is ideal for creating raised panels for doors and wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an…

    1 Review(s)
    $104.47
  22. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Use this panel raiser to shape raised panels for doors and paneling. It can also be used for decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upward to carve out most of the cut, while two small…

    $98.97
  23. Space Balls - Raised Panel Door Spacers

    Space Balls - Raised Panel Door Spacers

    …your rail and stile grooves to center raised panels in their frames, thereby ensuring flawless frame and panel assemblies. The balls are soft enough to allow expansion and contraction, but firm enough to keep the panel from rattling. 8-10 space balls per door recommended. Synthetic rubber. 0.26"…

    14 Review(s)
    $6.49
  24. Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    …combines a backcutter with the smooth cuts of Freud's 2+2 Raised Panel Bits.* Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4".* These bits produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods and…

    1 Review(s)
    $119.97
  • Items 1 - 24 of 51
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X