Raised Panel Router Bit

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    …compatibility.* Patented design allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers. Application: Producing panels from 3/4" stock that are flush with…

    1 Review(s)
    $119.97
  2. Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    …Freud's 2+2 Raised Panel Bits.* Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4".* These bits produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods and softwoods.* Use on table-mounted portable routers.

    1 Review(s)
    $119.97
  3. Raised Panel Router Bit - Ogee - Horizontal

    Raised Panel Router Bit - Ogee - Horizontal

    router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised

    2 Review(s)
    From: $64.99
  4. Freud 97-252, 3-Piece Door Set

    Freud 97-252, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.

    2 Review(s)
    $183.47
  5. Back Cutter Router Bit

    Back Cutter Router Bit

    …way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The same goes for raised panels. Instead of planing…

    0 Review(s)
    $44.99
  6. Horizontal Panel Router Bit Set With Wooden Case

    Horizontal Panel Router Bit Set With Wooden Case

    …full-height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. The panel raiser features a 5/8" radius ogee profile that…

    5 Review(s)
    $149.99
  7. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    …to raise both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are…

    0 Review(s)
    $142.99
  8. Freud® # 97-200 3-Pc. Cabinet Bit Set

    Freud® # 97-200 3-Pc. Cabinet Bit Set

    Ogee rail-and-stile bits and a Quadra-Cut™ bevel raised-panel bit all have 1/2" shanks and are designed for use on 3/4" stock. Bits cut all composite materials, plywoods, hardwoods and softwoods. For use on a table-mounted portable router. Rail-and-stile bits have an overall diameter of…

    $179.99
  9. Raised Panel Router Bit - Ogee

    Raised Panel Router Bit - Ogee

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    2 Review(s)
    $54.99
  10. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    This ogee panel raiser is ideal for creating raised panels for doors and wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an…

    1 Review(s)
    $104.47
  11. Raised Panel Router Bit - Cove - Horizontal

    Raised Panel Router Bit - Cove - Horizontal

    router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised

    3 Review(s)
    From: $64.99
  12. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Use this panel raiser to shape raised panels for doors and paneling. It can also be used for decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upward to carve out most of the cut, while two small…

    $98.97
  13. Raised Panel Router Bit - Straight - Horizontal

    Raised Panel Router Bit - Straight - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors.…

    4 Review(s)
    From: $64.99
  14. Ogee Raised Panel Bit with Back Cutter P605

    Ogee Raised Panel Bit with Back Cutter P605

    Use this Ogee Raised Panel Bit with Back Cutter (P605) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting…

    $137.79 $103.34

    SAVE 25%

  15. Raised Panel Router Bit - Straight

    Raised Panel Router Bit - Straight

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    4 Review(s)
    $54.99
  16. Freud 97-158, 3-Piece Door Set

    Freud 97-158, 3-Piece Door Set

    bits work for any door 5/8" to 1-1/4" thick. The unique cutter geometry virtually eliminates tearout. Adjustable shims let you adjust the panel groove from 7/32" to 1/4" thick, enabling a tight fit when using plywood. Also includes a 3-1/2" diameter Cove Raised Panel Bit with back cutter. The panel

    1 Review(s)
    $195.97
  17. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    …You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward…

    2 Review(s)
    From: $104.47
  18. Traditional Stile and Rail Router Bit Set

    Traditional Stile and Rail Router Bit Set

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  19. Freud 97-250, 3-Piece Door Set

    Freud 97-250, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.

    $183.47
  20. Shaker Raised Panel 3-Piece Bit Set

    Shaker Raised Panel 3-Piece Bit Set

    …quality door bit set lets you cut both the cope and stick joints for the door frame, as well as the raised panel that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade…

    $209.99
  21. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  22. Vertical Panel Router Bit Set With Wooden Case

    Vertical Panel Router Bit Set With Wooden Case

    This rail and stile set includes everything you need to create raised panel doors of nearly any size. The panel raiser is vertically oriented, which is ideal for smaller routers, and features a 5/8" radius ogee profile that goes well with the beaded profile on the stick work. The stile and rail…

    1 Review(s)
    $149.99
  23. Freud 97-154, 3-Piece Door Set

    Freud 97-154, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit.

    3 Review(s)
    $183.47 $128.42

    SAVE 30%

  24. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Use this high-performance 2-3/4" diameter cutter for creating raised panels for doors and wainscoting, as well as decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with…

    $98.97
  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X