Reading Tape

  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
  1. ProTape® 25' Carpenter's Tape Measure

    ProTape® 25' Carpenter's Tape Measure

    …tough to withstand your rugged lifestyle, the ProTape 25' Carpenter's Tape Measure has large, easy-to-read numbers!* 25' tape measures 1" wide for quick, visual readings * 25' tape handles most of your measuring needs* 1" wide tape extends without bending for easy one-person measurements* Large,…

    $12.99
  2. FastCap ProCarpenter Flatback Tape Measure

    FastCap ProCarpenter Flatback Tape Measure

    The ProCarpenter Old Standby 16' tape is 7/8" wide and sits flat on surfaces to measure curvesand flat panels precisely and easily. Features easy-to-read standard measurements to1/16" with markings across the entire width of the blade, dual thumb and fingerlocks, belt clip, rubber casing, and the…

    5 Review(s)
    $9.39
  3. Universal Tape Gauge

    Universal Tape Gauge

    …old and inaccurate method of bending the tape measure to take an inside measurement by use of a crosshair that is perfectly referenced at 5 inches to the rear stop, and at 1 inch to the forward stop. * To take an inside measurement, add 5 inches to the reading from the crosshair* To take an outside…

    $15.99
  4. Self-Adhesive Measuring Tape

    Self-Adhesive Measuring Tape

    This adhesive-backed measuring tape is ideal for miter saws, radial-arm saws, drill presses or anywhere you need accurate, easy-to-read measurements. Tape is 6' long and available in both left-to-right and right-to-left orientations.* 1/2" wide x 6' long* Peel-and-stick adhesive-backed steel*…

    11 Review(s)
    $9.99
  5. FastCap ProCarpenter Lefty/Righty Tape Measure

    FastCap ProCarpenter Lefty/Righty Tape Measure

    …be read easily from either side of this 16' tape. It also boasts a host of innovative features like erasable notepad and tape surfaces, dual thumb and finger locks, superior ergonomics, compact rubber casing, and a stainless-steel pencil sharpener. Add a SpeedClip (sold separately)to carry your tape

    18 Review(s)
    $8.99
  6. Fence Stop for FastCap® Best Fence System

    Fence Stop for FastCap® Best Fence System

    …cam-action stop for the Best Fence lets you place the stop anywhere you want with precision and ease. A magnifying glass is built in so reading the tape measurements is easy. Stops can be lifted up and out of the way when not needed, and flipped back down without losing your measurement. Calibrating…

    $49.99
  7. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    There's no need to juggle guide rails, a pencil or tape measure. In fact, there's no measuring or marking required - just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any…

    16 Review(s)
    $34.99
  8. Rockler Tablesaw CrossCut Sled

    Rockler Tablesaw CrossCut Sled

    …your saw perfectly.* Right edge of sled functions as a zero-clearance chip breaker.* Includes four 2' pieces of 3/4" wide self-adhesive low-friction tape for smooth sliding of the platform and fence.* Aluminum fence measures 3"H x 25"L.* MDF fence face measures 2-7/8"H x 27"L.* MDF Fence face can be…

    91 Review(s)
    $139.99
  9. Portable Cross Cut Sled with FREE Cutoff Platform

    Portable Cross Cut Sled with FREE Cutoff Platform

    …you to cut the sled down to fit your saw perfectly.* Right edge of sled functions as a zero-clearance chip breaker.* Self-adhesive low-friction tape allows for smooth sliding of the platform and fence.* MDF Fence face can be removed for replacement.* Nylon set screws in the miter bar are adjustable…

    1 Review(s)
    $148.98 $119.99

    SAVE 19%

  10. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …accuracy and finish quality. You can also add the CRB7 Edging Trim Kit (45052, sold separately) for the ability to trim solid wood edging or edging tape without having to run your router on the narrow edge of the material. The CRB7 fits all routers with edge guide rod drillings, and unlike similar…

    7 Review(s)
    $79.99
  11. iGaging 12'' Combination Square

    iGaging 12'' Combination Square

    Enjoy accuracy and greater efficiency on multiple applications with the this 12" Precision Combination Square! Use it as a 45° miter, depth gauge, level, plumb, and precision tool. Made of hardened steel with a satin chrome finish blade. Easy-to-read graduations of 8ths, 16ths, 32nds, and 64ths.…

    5 Review(s)
    $29.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
Feedback X