Rip

  • Items 1 - 24 of 122
  • Page:
    1. 1
    2. 2
    3. 3
  1. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    …pencil or tape measure. In fact, there's no measuring or marking required - just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any circular saw, whether left- or right-handed.…

    13 Review(s)
    $34.99
  2. Laguna Tools Fusion Series 1-3/4HP Tablesaw with 36'' Fence

    Laguna Tools Fusion Series 1-3/4HP Tablesaw with 36'' Fence

    …port to attach to your dust collection system to keep your work environment clean. Looking to add more versatility to your Fusion Tablesaw? The 52" Rip Fence Upgrade Kit w/Support Table (#46036 - Sold Separately) is the ideal accessory. Kit includes 52" Aluminum Fence Rails, 27" x 27" MDF Table, and…

    7 Review(s)
    $1295.00
  3. 10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    10'' x 40T ATB Forrest Woodworker II General Purpose Blade

    Get a smooth-as-sanded surface! Rips and crosscuts hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required). For another option in the Forrest Woodworker II series, check out…

    23 Review(s)
    $120.79
  4. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the…

    104 Review(s)
    $26.99
  5. Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    …MJ Splitter™ SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback! Technical Details:* For a kerf range of 0.118"-0.145"* Use for 90° cuts only* Made of 100% polycarbonate shell and…

    $39.99
  6. 3-Piece Safety Kit

    3-Piece Safety Kit

    …the cutting process without putting your hands at risk. Feather-Loc delivers:* Use Feather-Loc on your table saw to keep stock tight against the rip fence* Attach one to your fence to prevent workpieces from lifting during a cut* Use one on your table and another on your fence for optimum safety*…

    1 Review(s)
    $29.99 $39.77
  7. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …stock. It also adds one inch of cutting width to the GRR-Ripper. Also, acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control…

    7 Review(s)
    $79.99
  8. The Hand Guard™ Push Block

    The Hand Guard™ Push Block

    …way.* Heel adjusts for wood thicknesses with locking positions of 1/8", 3/8", 5/8" and 7/8" depth.* Heel also rotates into closed position for shaping operations.* Comes "ready to rip" with one heel in the legs down ripp only position.* Plastic.* Adjustable polypropylene heel with locking key points

    9 Review(s)
    $17.99
  9. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  10. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  11. Dewalt DW744X Heavy-Duty 10'' Job Site Table Saw with Site-Pro Modular Guarding System

    Dewalt DW744X Heavy-Duty 10'' Job Site Table Saw with Site-Pro Modular Guarding System

    Heavy-Duty 10" Job Site Table Saw with Site-Pro Modular Guarding System * 3 Year Limited Warranty* Telescoping fence delivers 24-1/2" rip capacity* Rack and pinion design makes fence adjustments fast, smooth and accurate* 15.0 Amp high-torque motor with the power to cut pressure-treated lumber and…

    2 Review(s)
    $499.00
  12. Freud® LM74R Industrial Glue Line Rip Saw Blades

    Freud® LM74R Industrial Glue Line Rip Saw Blades

    …blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat…

    9 Review(s)
    From: $69.97
  13. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  14. Dewalt DW745 10'' Compact Job Site Table Saw with Site-Pro Modular Guarding System

    Dewalt DW745 10'' Compact Job Site Table Saw with Site-Pro Modular Guarding System

    …System * 3 Year Limited Warranty* 15 Amp motor quickly rips through hardwoods with ease* Rack & Pinion fence design delivers consistent fence to blade parallelism* Telescoping rails retract to create a small, portable package* 16" of rip easily cuts a variety of larger shelving and trim…

    2 Review(s)
    $369.00
  15. Takuma 240mm Ryoba Saw

    Takuma 240mm Ryoba Saw

    The blades are made of high-quality tempered steel. The ripping side features an 8", 8 tpi edge. The crosscut edge is 9", 16 tpi. Replacement blades are sold separately.

    6 Review(s)
    From: $26.79
  16. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    19 Review(s)
    $114.99
  17. Magswitch® Workholding System Starter Kit

    Magswitch® Workholding System Starter Kit

    …on either side of the blade. The two Mag-Jig 150s are removable and can also be used in your own jigs and fixtures.* Holds stock for controlled ripping, routing, shaping, jointing and more* Fast setups with precise positioning* Small footprint makes it ideal for use with small tables, band saws and…

    1 Review(s)
    $76.49
  18. SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    …of SawStop, LLC and are used with permission. Technical Details:* Motor: 1.75 hp, 1 phase, 110 V, 14 A* Weight: 381 lbs (table saw only)* Max. rip, right of blade: 52"* Cabinet footprint: 19 3/8"W x 19 3/8"D* Cast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)* Stamped steel extension…

    2 Review(s)
    $1899.00
  19. SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    …of SawStop, LLC and are used with permission. Technical Details:* Motor: 1.75 hp, 1 phase, 110 V, 14 A* Weight: 365 lbs (table saw only)* Max. rip, right of blade: 36"* Cabinet footprint: 19 3/8"W x 19 3/8"D* Cast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)* Stamped steel extension…

    3 Review(s)
    $1799.00
  20. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective…

    5 Review(s)
    From: $71.47
  21. Table Saw Fence Systems

    Table Saw Fence Systems

    …Systems...* Do not lock parallel to saw blade* Do not have accurate measuring scales* Have Fence Bars that are too short* Do not have adequate width ripping capacity* Require frequent re-alignment* Lack safety devices* Are unable to be finely adjusted The Vega Saw Fence Systems solve all of these…

    28 Review(s)
    From: $329.99
  22. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    …can be with the newest volume from renowned band saw expert Mark Duginske. From its typical usage for fair curves, straight cuts, scrollwork, ripping and resawing, all the way to mortise and tenon and dovetail joinery, you'll be amazed at how much you can get from one simple machine. Also includes…

    1 Review(s)
    $19.95
  23. Taper / Straight Line Jig

    Taper / Straight Line Jig

    …large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".* Constructed of 1/2" thick MDF.* Includes 36" miter bar.* Indexing marks make angle setting easy — each…

    44 Review(s)
    $77.99
  24. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    …MJ Splitter™ SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback! Technical Details:* For a Thin Kerf range of 0.090"-0.118"* Use for 90° cuts only* Made of 100% polycarbonate shell…

    3 Review(s)
    $39.99
  • Items 1 - 24 of 122
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X