Rip Saw

  • Items 1 - 24 of 106
  • Page:
    1. 1
    2. 2
    3. 3
  1. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the…

    104 Review(s)
    $26.99
  2. Table Saw Fence Systems

    Table Saw Fence Systems

    saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccurate cuts. Most Saw Fence Systems...* Do not lock parallel to saw blade* Do not have accurate measuring scales* Have Fence Bars that are too short* Do not have adequate width ripping

    28 Review(s)
    From: $329.99
  3. Jet® 10'' Jobsite Table Saw w/Retractable Stand

    Jet® 10'' Jobsite Table Saw w/Retractable Stand

    If you're looking for a jobsite saw that's both powerful and portable, look no further than the all-new JET® B3NCH 10" Jobsite Table Saw with stand. This table saw features a 15 Amp soft start motor, 25" right rip capacity, a riving knife and anti-kickback pawls for added safety, and a…

    1 Review(s)
    $669.99
  4. Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    …MJ Splitter™ SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback! Technical Details:* For a kerf range of 0.118"-0.145"* Use for 90° cuts only* Made of 100% polycarbonate shell and…

    $39.99
  5. Takuma 240mm Ryoba Saw

    Takuma 240mm Ryoba Saw

    The blades are made of high-quality tempered steel. The ripping side features an 8", 8 tpi edge. The crosscut edge is 9", 16 tpi. Replacement blades are sold separately.

    6 Review(s)
    From: $26.79
  6. Universal Cut Z-Saw

    Universal Cut Z-Saw

    Unlike most handsaws that are optimized for a particular cutting style, this Japanese model handles crosscuts, rips and diagonal cuts in a wide variety of hard and soft woods. With 15 impulse-hardened teeth per inch, a 10-3/8" long cutting surface, and a kerf width of only 0.92mm, it makes quick,…

    3 Review(s)
    $36.99
  7. Powermatic® 18'' Bandsaw 5HP 1PH

    Powermatic® 18'' Bandsaw 5HP 1PH

    …bearing guide system gives close blade control while reducing friction * Special grooved thrust bearing stabilizes smaller blades * Heavy duty T-style rip fence has adjustable aluminum resaw fence * Large 24" x 24" cast iron table * 2-inch diameter solid steel pin for resaw work * 18-inch resaw, and…

    $4794.99
  8. Freud® Premier Fusion Saw Blade

    Freud® Premier Fusion Saw Blade

    …coating and high performance anti-vibration - all working together in concert to provide the ultimate cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. The Perma-SHIELD® coating covers the blade plate and cutting edge in a…

    8 Review(s)
    $99.97
  9. Freud® LM72R Industrial Heavy-Duty Rip Saw Blades

    Freud® LM72R Industrial Heavy-Duty Rip Saw Blades

    This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to…

    7 Review(s)
    From: $57.47
  10. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective…

    5 Review(s)
    From: $71.47
  11. Powermatic SLR12 Straight Line Rip Saw

    Powermatic SLR12 Straight Line Rip Saw

    Whether it's face frames, long runs or full production, the SLR12 Straight Line Rip Saw has every job covered. Powered by a 15HP main motor, this saw has the capacity for virtually any job. The 12" main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically…

    $16599.99
  12. Adjustable Lumber Storage Rack

    Adjustable Lumber Storage Rack

    …make three adjustable shelves that support up to 300 lbs. per shelf! It's the perfect lumber rack to keep just above your miter saw for easy access when cutting rippings to length. Fasten it to the wall at whatever height is easiest on your back, or at eye level to make checking for bow and twist a…

    28 Review(s)
    $31.99 $21.99

    SAVE 31%

  13. 12'' x 12'' Acrylic Base

    12'' x 12'' Acrylic Base

    ripping and shaping when used with the Power Tool Guide Kit (sold separately, sku: 42173) and the Straight Edge System (sold separately, sku: 36495)!* 12" x 12" x 1/4" thick acrylic* Keeps your router or circular tracked to the Straight Edge System* Dedicate one base for each router or circular saw

    2 Review(s)
    $16.99
  14. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    …from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any circular saw, whether left- or right-handed. Adjusting the fence is easy, simply open the cam lever, and slide it to your setting, just like a table saw fence. * Quickly…

    13 Review(s)
    $34.99
  15. Kreg Precision Router Table Fence

    Kreg Precision Router Table Fence

    …table saw rip fences, the Kreg Precision Router Fence is the only fence on the market that utilizes a t-square style design that allows for fast and easy positioning of the fence and a cam style lockdown which keeps it perfectly parallel to the miter slot at all times.* Table Saw Fundamentals:…

    $199.00
  16. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  17. Freud® LM72M Industrial Heavy-Duty Rip Saw Blades

    Freud® LM72M Industrial Heavy-Duty Rip Saw Blades

    This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from…

    From: $51.47
  18. Freud® LM74M Industrial Glue Line Rip Saw Blade

    Freud® LM74M Industrial Glue Line Rip Saw Blade

    …coating that resists corrosion and resin or "pitch" build-up and resists heat up to 2 times longer than standard polished blades. * Features Ti-Co™ Hi-Density Carbide Ripping Blend for maximum performance One Freud Industrial LM74M Heavy Duty Glue Line Rip Saw Blade Specifications

    $62.97
  19. Freud® LM71M Industrial Thick Stock Rip Saw Blades

    Freud® LM71M Industrial Thick Stock Rip Saw Blades

    This blade is ideal for high-speed ripping operations in hardwood and softwood. The low tooth count also makes this blade ideal for ripping thick material. It can be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to…

    From: $64.97
  20. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  21. Freud® LM74R Industrial Glue Line Rip Saw Blades

    Freud® LM74R Industrial Glue Line Rip Saw Blades

    …blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat…

    9 Review(s)
    From: $69.97
  22. Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Rip Fence with resaw for 14" Jet Bandsaws. Positive locking assembly slides along rail with low-friction plastic contact points for smooth, easy adjustments. Miter gauge pivots 30° left or right to facilitate angled cuts. Includes 6" x 1" diameter resaw attachment for added versatility.…

    $161.99
  23. Laguna Fusion 52" Rip Fence Upgrade Kit w/Support Table

    Laguna Fusion 52" Rip Fence Upgrade Kit w/Support Table

    Looking to add more versatility to your Fusion Tablesaw? The 52" Rip Fence Upgrade Kit w/Support Table is the ideal accessory. Kit includes 52" Aluminum Fence Rails, 27" x 27" MDF Table, and 2 Table Legs.* Note: Direct Ship Item -- Shipped directly from manufacturer* Must be shipped within 48…

    $250.00
  24. Panel Saw Lower Extensions for Panel Pro 2 Panel Saw

    Panel Saw Lower Extensions for Panel Pro 2 Panel Saw

    Cutting large panels on your Panel Pro 2 Panel Saw is easier than ever when you add a pair of Lower Extensions! These extensions add 20" to each side of your saw, giving you the option to effortlessly crosscut or rip even larger panels. Includes mounting screws for quick, easy installation.…

    $98.99
  • Items 1 - 24 of 106
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X