Rip Fence

  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
  1. Table Saw Fence Systems

    Table Saw Fence Systems

    …saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccurate cuts. Most Saw Fence Systems...* Do not lock parallel to saw blade* Do not have accurate measuring scales* Have Fence Bars that are too short* Do not have adequate width ripping

    28 Review(s)
    From: $329.99
  2. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the…

    104 Review(s)
    $26.99
  3. Dewalt DW745 10'' Compact Job Site Table Saw with Site-Pro Modular Guarding System

    Dewalt DW745 10'' Compact Job Site Table Saw with Site-Pro Modular Guarding System

    rips through hardwoods with ease* Rack and Pinion fence rails make fence adjustments fast, smooth and accurate* Telescoping fence rails retract to create a small, portable package* On Board Storage provides easy access to the Site-Pro Guarding components and push stick when not in use* 16" of rip

    2 Review(s)
    $369.00
  4. Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Ripping panels up to 104" long has never been easier! The 52" to 104" Low Profile Straight Edge Clamp does it all. Benefits:* Clamps for use as a straight edge with a router or circular saw* Add the T-fence and it becomes a T-square for laying out your project* Connect two 52" sections to create a…

    21 Review(s)
    $89.99 $67.49

    SAVE 25%

  5. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …stock. It also adds one inch of cutting width to the GRR-Ripper. Also, acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control…

    7 Review(s)
    $79.99
  6. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    …marking required - just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any circular saw, whether left- or right-handed. Adjusting the fence is easy, simply open the cam lever,…

    16 Review(s)
    $34.99
  7. Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Jet® Rip Fence w/Resaw for 14'' Bandsaw

    Rip Fence with resaw for 14" Jet Bandsaws. Positive locking assembly slides along rail with low-friction plastic contact points for smooth, easy adjustments. Miter gauge pivots 30° left or right to facilitate angled cuts. Includes 6" x 1" diameter resaw attachment for added versatility.…

    $161.99
  8. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …can ProMAX be installed as a right extension replacement on right tilt "cabinet" grade table saws for the same reason. Mounting ProMAX to the far right will avoid the protruding motors, however, ProMAX must be supported with two steel rails that also support your T-square style rip fence and legs.

    14 Review(s)
    $349.99
  9. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …away from the blade when cutting small workpieces.* Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all operations.* Instantly removable from your table saw when making rip cuts or other operations that don't require a sled.* Safely handles…

    2 Review(s)
    $159.99
  10. Laguna Fusion 52" Rip Fence Upgrade Kit w/Support Table

    Laguna Fusion 52" Rip Fence Upgrade Kit w/Support Table

    Looking to add more versatility to your Fusion Tablesaw? The 52" Rip Fence Upgrade Kit w/Support Table is the ideal accessory. Kit includes 52" Aluminum Fence Rails, 27" x 27" MDF Table, and 2 Table Legs.* Note: Direct Ship Item -- Shipped directly from manufacturer* Must be shipped within 48…

    $250.00
  11. SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    …of SawStop, LLC and are used with permission. Technical Details:* Motor: 1.75 hp, 1 phase, 110 V, 14 A* Weight: 365 lbs (table saw only)* Max. rip, right of blade: 36"* Cabinet footprint: 19 3/8"W x 19 3/8"D* Cast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)* Stamped steel extension…

    3 Review(s)
    $1,799.00
  12. Kreg Precision Router Table Fence

    Kreg Precision Router Table Fence

    …however, is only half the story. Taking cues from high-end table saw rip fences, the Kreg Precision Router Fence is the only fence on the market that utilizes a t-square style design that allows for fast and easy positioning of the fence and a cam style lockdown which keeps it perfectly parallel to…

    $199.00
  13. Kreg Precision Router Table System

    Kreg Precision Router Table System

    …the rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two independent fence

    1 Review(s)
    $499.00
  14. Laguna 1412 14'' Band Saw

    Laguna 1412 14'' Band Saw

    …last longer. The generously sized table is micro-polished to a beautiful sheen and includes a precision fence that can be flipped vertically for resawing, or horizontally for standard ripping. The magnetic blade guard is raised and lowered with a worm-drive rack and pinion so your blade guides stay…

    6 Review(s)
    $1,097.00
  15. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …wide-body hold down clamps prevent stock from drifting dangerously from your fence.* Clamps have non-marring rubber caps for enhanced grip.* Three adhesive strips run across the jig to help stabilize your workpiece.* With taper angle zeroed out, jig works great to rip straight edges on rough lumber.

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  16. Jet® 10'' Jobsite Table Saw w/Retractable Stand

    Jet® 10'' Jobsite Table Saw w/Retractable Stand

    …15 Amp motor with soft start * Large telescoping extension wing provides a wide 25" ripping capacity * Unique dust shroud design enhances dust and chip removal * Aluminum extruded rails ensure a square fence and sliding precision * Rear extension provides out feed support and keeps the work piece…

    1 Review(s)
    $669.99
  17. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …as easily as making long, straight cuts* Magnetic blade storage drawer so you're ready for every cutting situation* Combination miter gauge and rip fence for angled cuts and long, straight cuts* Variable speed motor for controlled cuts* Adjustable safety guard covers the blade* Rockwell's highest…

    21 Review(s)
    $178.99
  18. Festool Parallel Guides 495717 for Guide Rail System

    Festool Parallel Guides 495717 for Guide Rail System

    …fast, accurate, repeatable cuts at any dimension from 7-11/16" to 25-19/32". They can be used to rip cabinet parts to width, or to crosscut them to length, and work much like a table saw fence, eliminating the need to measure, mark and position the guide rail for each cut. Festool Parallel Guides…

    $270.00
  19. Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    …it on the table saw to keep long stock tight against the rip fence, or attach it to your fence to prevent workpieces from lifting during a cut. It features integral fittings for T-slots and includes a Miter Slot Adapter for tables and fences with standard 3/8" x 3/4" slots. Additional specifications…

    14 Review(s)
    $16.79
  20. Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence

    Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence

    …collection* Standard regular insert and dado insert* CSA, UL, CE certifiedSpecifications:* 3HP 230V Single phase motor * 10" blade diameter * 50" rip capacity * 90° - 45° blade tilt * Dual 3/8 x 3/4" T-Slot miter slots* 4" dust port * 40" x 27" tabletop dimension * 33" x 27" tabletop…

    1 Review(s)
    $1,995.00
  21. Powermatic SLR12 Straight Line Rip Saw

    Powermatic SLR12 Straight Line Rip Saw

    …Dual anti-kickback devices help prevent discharge of work pieces. The heavy-duty precision rip fence travels on a solid steel guide rail and is micro-adjustable for fast, accurate set up. Controls for rip width, cutting depth, main and feed motors are all mounted up front for fast job changes. The…

    $16,599.99
  22. Powermatic® 14'' Band Saw with 2-Piece Stand

    Powermatic® 14'' Band Saw with 2-Piece Stand

    …power transmission while minimizing noise and vibration. It has full 6" under-guide capacity with 13-1/2" frame-to-blade clearance. The aluminum rip fence comes with a resaw attachment.* Carter™ quick-tension lever speeds blade changes, and the de-tension setting extends blade life during…

    2 Review(s)
    $1,199.99
  23. Rockler Adjustable Table Featherboard

    Rockler Adjustable Table Featherboard

    Table featherboard is designed to keep wood snug against fence for a safer and cleaner cut when ripping, routing, or drilling. Ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. Features two easy-to-grip star knobs to…

    65 Review(s)
    $19.99
  24. Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    …cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an overlock with a curved edge * Motor: 3 HP, 230V, 1 Phase, 60 Hz * Arbor Size: 5/8 "* Blade Diameter: 10 "* Blade Speed: 4,300 RPM* Max Rip To Right Of Blade: 52 "* Max Rip To Left Of…

    From: $3,199.99
  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X