Rip Saw Blades

  • Items 1 - 24 of 85
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® LM74M Industrial Glue Line Rip Saw Blade

    Freud® LM74M Industrial Glue Line Rip Saw Blade

    …coating that resists corrosion and resin or "pitch" build-up and resists heat up to 2 times longer than standard polished blades. * Features Ti-Co™ Hi-Density Carbide Ripping Blend for maximum performance One Freud Industrial LM74M Heavy Duty Glue Line Rip Saw Blade Specifications

    $62.97
  2. Saw Blade Panther, ATF 55 (495372)

    Saw Blade Panther, ATF 55 (495372)

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 55 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…

    $45.00
  3. 3-Piece Safety Kit

    3-Piece Safety Kit

    …from the blade, then stores easily using the built-in magnet; and a Ultra Push-Bloc that gives you all the gripping power you need to keep your stock moving efficiently through the cutting process without putting your hands at risk. Feather-Loc delivers:* Use Feather-Loc on your table saw to keep…

    1 Review(s)
    $29.99 $39.77
  4. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …clamp keeps your fingers away from the blade when cutting small workpieces.* Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all operations.* Instantly removable from your table saw when making rip cuts or other operations that don't require…

    $159.99
  5. Freud® LM74R Industrial Glue Line Rip Saw Blades

    Freud® LM74R Industrial Glue Line Rip Saw Blades

    …standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp.…

    9 Review(s)
    From: $69.97
  6. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    …Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU87R006M20 blade is available for Festool, DeWalt, and Makita track saws.

    9 Review(s)
    From: $32.97
  7. Freud® LM72M Industrial Heavy-Duty Rip Saw Blades

    Freud® LM72M Industrial Heavy-Duty Rip Saw Blades

    blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade,

    From: $51.47
  8. Irwin Marples 10'' Saw Blade, 24T ATB

    Irwin Marples 10'' Saw Blade, 24T ATB

    …clean rip cuts. The Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. IRWIN is proud to introduce a full line of fine woodworking saw blades

    $34.99
  9. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is perfect for table saws

    19 Review(s)
    $114.99
  10. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the…

    104 Review(s)
    $26.99
  11. Freud® LM72R Industrial Heavy-Duty Rip Saw Blades

    Freud® LM72R Industrial Heavy-Duty Rip Saw Blades

    …standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp.…

    7 Review(s)
    From: $57.47
  12. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  13. Irwin Marples 10'' Saw Blade, 50T ATB+R

    Irwin Marples 10'' Saw Blade, 50T ATB+R

    …chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws. Technical Details:*…

    7 Review(s)
    $44.99
  14. Panther Saw Blade for Festool TS 75 EQ

    Panther Saw Blade for Festool TS 75 EQ

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 75 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…

    $73.00
  15. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    …one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade

    5 Review(s)
    From: $71.47
  16. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …since you can take a lightweight tool to the sheet rather than a heavy sheet to the saw. Just position the Guide Rail on the sheet and rip away - there's no need to even clamp! Also includes 36-tooth carbide blade, FS/2 limit stop, plastic splintergaurd, and a Plug-It 13' Power Cord, all in a New…

    $725.00
  17. Freud® LM71M Industrial Thick Stock Rip Saw Blades

    Freud® LM71M Industrial Thick Stock Rip Saw Blades

    This blade is ideal for high-speed ripping operations in hardwood and softwood. The low tooth count also makes this blade ideal for ripping thick material. It can be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to…

    From: $64.97
  18. Powermatic SLR12 Straight Line Rip Saw

    Powermatic SLR12 Straight Line Rip Saw

    Whether it's face frames, long runs or full production, the SLR12 Straight Line Rip Saw has every job covered. Powered by a 15HP main motor, this saw has the capacity for virtually any job. The 12" main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically…

    $16599.99
  19. Freud® LU84M Industrial Combination Saw Blades

    Freud® LU84M Industrial Combination Saw Blades

    …one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade

    From: $61.97
  20. Freud® LU72M Industrial General Purpose Saw Blades

    Freud® LU72M Industrial General Purpose Saw Blades

    …surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $54.97
  21. Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    This multi-purpose blade will cut stacks of man made wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials…

    From: $68.47
  22. Freud® LU71M Industrial High-Production General Purpose Saw Blades

    Freud® LU71M Industrial High-Production General Purpose Saw Blades

    …angle, this blade can operate at high feed rates. These features also make it the blade of choice when crosscutting extremely thick stock. Use it with dimensioned stock where speed is more important than surface quality. The ideal working range is from 1/4" to 1-1/4" thick for ripping and 1-1/2" to…

    From: $96.47
  23. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    …tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no…

    24 Review(s)
    From: $49.97
  24. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R006M20 blade is for Festool, DeWalt, and Makita track saws.

    From: $40.97
  • Items 1 - 24 of 85
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X