Rockler Rabbet Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
  1. Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    …the bits and protect the cutting edges. Includes five carbide-tipped bits:* Rabbeting bit with four bearings (#91595) for 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets* 3/4" dia. x 1" long straight bit, 2-fluted (#90638)* 3/8" radius x 5/8" high roundover bit (#29083)* 45° x 1/2" high chamfer bit

    $149.99
  2. Rockler Rabbeting Router Bit Set - 1/2" Shank

    Rockler Rabbeting Router Bit Set - 1/2" Shank

    …bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features…

    1 Review(s)
    $49.99
  3. Rockler Rabbeting Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    Rockler Rabbeting Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. Sturdy 1/2" shank.

    15 Review(s)
    $39.99
  4. 1/4" Shank Rabbeting Bit Set

    1/4" Shank Rabbeting Bit Set

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. 1/4" shank.

    $44.99
  5. Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    rabbet. * Steel pilots can be removed from bits and used with edge guides for wider rabbets. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers. * Rockler numbers 31421, 33592 include multiple bearings for multiple rabbeting

    $57.47
  6. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99
  7. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  8. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Cut tight-fitting dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth…

    5 Review(s)
    $59.99
  9. Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To…

    5 Review(s)
    $44.99
  10. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    0 Review(s)
    $142.99
  11. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …also helps to strengthen the joint over a basic rabbet or butt joint. Machining parts with the Lock Miter Bit is easy with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts,…

    From: $57.99
  12. Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …Panel Bit with Back Cutter (P605) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler

    $137.79
  13. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    From: $14.49
  14. Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …Panel Bit with Back Cutter (P636) to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler

    $142.99
  15. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    …its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which…

    21 Review(s)
    From: $13.99
  16. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  17. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …handle for excellent control and comfortable grip.* Post handle hold-down clamp allows for quick repositioning.* When using the Coping Sled for the first time, your bit will be cutting a small rabbet in the phenolic base. This is normal and required to minimize tear-out for all future cuts.

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X