Rockler Router Bits

  • Items 1 - 24 of 244
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Roundover/ Beading Router Bits - 1/4" Shank

    Rockler Roundover/ Beading Router Bits - 1/4" Shank

    …for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to…

    13 Review(s)
    From: $22.99
  2. Rockler T-Slotwall Cutter Router Bit - 1-1/16" Dia x 13/16" H x 1/2" Shank

    Rockler T-Slotwall Cutter Router Bit - 1-1/16" Dia x 13/16" H x 1/2" Shank

    …storage system. This bit hogs out the slots so you can keep your tools visible and within easy reach. It allows you to reuse scrap wood or left over panels as shop storage. Note: Not intended to create T-slots for jigs. If that is your goal, use bit 26099.* Carbide-tipped bit cuts 5/16" x 1-1/16"…

    7 Review(s)
    $34.99
  3. Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  4. Rockler V-Groove Router Bits - 1/4" Shank

    Rockler V-Groove Router Bits - 1/4" Shank

    …used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes. 1/4" shank.

    2 Review(s)
    From: $19.99
  5. T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    …T-slot Router Bit (Rockler #26099). Lengths range from 1" to 3-1/2" (see below for selection). Technical Details:* Zinc plated steel* 5/16" x 18 TPI threading* Lengths from 1" to 3-1/2"* Foot measures 9/16" wide x 7/8" long x 7/64" thick Best Used With: Universal T-Tracks T-slot Router Bit (Rockler

    9 Review(s)
    From: $1.19
  6. Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/2" Shank

    Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/2" Shank

    This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long…

    10 Review(s)
    $59.99
  7. Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    …balance that makes it all the more versatile. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks stabilize the bit during the cut for the finest possible finish.

    2 Review(s)
    From: $39.99
  8. Rockler Classic Fluted Plunge Router Bits

    Rockler Classic Fluted Plunge Router Bits

    An upper ball bearing guide allows you to use this decorative plunge bit for template routing in the middle of a workpiece, or you can mount it in a table for edge treatments. Pairs a cove with a round over for an attractive finished look.

    3 Review(s)
    From: $37.99
  9. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  10. Rockler Classic Ogee Router Bits - 1/2" Shank

    Rockler Classic Ogee Router Bits - 1/2" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  11. Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    This handy set consists of the most commonly used roundover bits: 1/4", 3/8" and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a…

    4 Review(s)
    $89.99
  12. Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. Features a ball-bearing guide to eliminate burning. 1/4" shank.

    $39.99
  13. Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Don't let ordinary router profiles overwhelm your more subtle projects. Rockler's miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts. This one features an attractive dual radius with the option of creating a shoulder on the…

    $19.99
  14. Rockler Circle/Grommet Templates

    Rockler Circle/Grommet Templates

    …(91372 and 22899).* Made of 1/4" acrylic.* Each template measures 10-7/8" square.* Use double-faced tape (50492) to adhere template to surface, or countersink some holes for screws.* Use with the 5/8" Short-Shank Guide Bushing (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    3 Review(s)
    $37.99
  15. Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.* IMPORTANT SAFETY NOTE: Do not invert any of the cutters! Be sure the carbide is facing the right direction for the rotation of the router.

    2 Review(s)
    $69.99
  16. Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    …a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H. For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

    1 Review(s)
    $109.99
  17. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  18. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  19. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  20. Rockler Router Lift FX

    Rockler Router Lift FX

    …* The Router Lift FX Plus accepts the following routers: Porter-Cable 690/890 Series, Bosch 1617-16-18, DeWalt* 610, 616, 618.* Plate measures 8-1/4" x 11-3/4" x 3/8" * Insert plate's center hole (3-5/8" overall dia.) accepts larger raised panel bits and includes an insert ring with a 1-1/2" bit

    41 Review(s)
    $199.99
  21. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB…

    15 Review(s)
    $3,799.99
  22. Rockler 3-Pc. Signmaking Router Bit Set - 1/4" Shank

    Rockler 3-Pc. Signmaking Router Bit Set - 1/4" Shank

    …over buying the bits separately! This set includes two V-groove bits and a round-nose bit—great for sign text, fluting and other decorative effects. All bits are carbide-tipped, with 1/4" shanks. Set includes:* 19/32" dia. x 33/64" high, carbide tipped , 60° V-groove bit (#23823)* 1/2"…

    2 Review(s)
    $59.99
  23. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router

    1 Review(s)
    $51.99
  24. Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Whether you need three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited…

    3 Review(s)
    $46.99
  • Items 1 - 24 of 244
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X