Router Fence Dust Collection

  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
  1. Rockler Dust Right® Router Table Dual Port

    Rockler Dust Right® Router Table Dual Port

    …plastic port combines fence and cabinet dust collection for single-source extraction. Plus, with two slightly different sized fittings on the port's open end, it accepts either 4" dust hose or our Dust Right® Handle. For open stands, combine the Dual Port with the Dust Bucket. * One fitting to…

    12 Review(s)
    $15.99 $11.99

    SAVE 25%

  2. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …Universal T-tracks accept 1/4" and 5/16" t-bolts as well as 1/4" hex bolts-perfect for hold-downs, stops, and featherboards.* Large opening in fence for big router bits.* Melamine fence faces for low-friction routing.* Includes a heavy-duty bit guard and a 2-1/2" diameter dust collection port.

    $139.99
  3. Kreg Precision Router Table Fence

    Kreg Precision Router Table Fence

    …to your router top and helps to maintain an enclosed vacuum chamber for superior dust collection.* Built In Jointer: Two fully independent fence faces and dual acrylic depth setting rods quickly turn your router table into a vertical jointer. Depth rods are stored inside of the fence and can be…

    $199.00
  4. Rockler Dust Bucket Dust Collection for Router Tables

    Rockler Dust Bucket Dust Collection for Router Tables

    The Router Table Dust Bucket will capture nearly all routing debris when you use both bucket and fence attachments with the Router Table Dual Port (20225) and your 4" dust collection system. 4" port can be mounted on the back or either side for convenient access. Enjoy maximum dust collection while…

    26 Review(s)
    $84.99 $63.74

    SAVE 25%

  5. Rockler Clear Dust Hose for Router Table Fence Port

    Rockler Clear Dust Hose for Router Table Fence Port

    The 2-1/2" clear dust hose is ideal for connecting to your Dust Right® Router Table Dual Port (20225, sold separately) and the dust port of your router fence. The clear dust hose measures 36" long. Use 2-1/2" Hose Clamps (sold separately) to secure hose to port.

    $10.49 $7.87

    SAVE 25%

  6. Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Plate, Pro Fence & Steel Cabinet

    …includes integrated dust bucket for superior dust collection.* Two integral casters allow you to tip and roll the entire router table. 1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed,…

    $999.99
  7. Woodworker's Journal Router Projects CD

    Woodworker's Journal Router Projects CD

    …Field Guide to Choosing a Router * Build the Ultimate Fluting Jig * Dust Collecting Router Table Fence * Router Bits: Cost, Quality and Value * Eclectic Blanket Chest * Six Tips for Avoiding Router Tearout * Box Joints on the Router Table * Modular Shelf System * Router Bit Cabinet with Pull-out…

    $4.99
  8. Kreg Precision Router Table System

    Kreg Precision Router Table System

    …rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two independent fence faces,…

    1 Review(s)
    $499.00
  9. Rockler Steel Router Table Cabinet

    Rockler Steel Router Table Cabinet

    router bits, wrenches, jigs, and more* Integrated dust collection provides a safe workspace and a cleaner cabinet* Internal dust bucket has a 4" recessed dust port that minimizes wall clearance when connecting to a dust collection system* Pre-drilled mounting holes compatible with all Rockler router

    7 Review(s)
    $459.99
  10. Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    …most routers* Detailed eight-page instruction booklet* Quick reference guide for standard joints Rockler Dovetail Jig Dust Collector: You don't have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created…

    131 Review(s)
    $205.98
  11. Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    …included Bench Dog ProLift Router Lift. ProLift is compatible with Porter-Cable 7518 & 7519; adapters for other routers available separately. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit…

    2 Review(s)
    $1,249.99
  12. Triton 3-1/4 HP Dual-Mode Plunge Router

    Triton 3-1/4 HP Dual-Mode Plunge Router

    …* Removable plunge tension spring makes bit adjustments easy when the Triton TRA001 is table mounted.* Worn brushes are easily accessible.* Single spanner 'above table' router bits changes. * Fully enclosed plastic shielding provides maximum protection from chips, and aids in dust collection.

    4 Review(s)
    $249.99
  13. DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    …specific router Router Table Dust Port: Keep your Rockler or Bench Dog Router Table clean and dust free with this Router Table Dust Port! Quickly and easily connects to your table using T-knobs (not included). The 2-1/2'' OD (2-1/4'' ID) port connects to your shop vac or dust collection

    $273.48
  14. Rockler Shop Vac Dust Fitting Adapter for 1-1/4'' to 2-1/4'' Diameter Hose

    Rockler Shop Vac Dust Fitting Adapter for 1-1/4'' to 2-1/4'' Diameter Hose

    …suction to 2-1/4" (I.D.) dust ports on router table fences, dovetail jig dust collectors and more. This is the only adapter that will connect Shop Vac hoses to the 2-1/4" ports on Bench Dog Pro Fence router table fences, Rockler Router Table Dust Ports, Rockler Dovetail Jig Dust Collectors and more.…

    9 Review(s)
    $4.99 $3.74

    SAVE 25%

  15. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …with lighted indicator Specifications:* Brand:Powermatic* Dust Collection Minimum CFM Required:800* Dust Port Diameter (OD/in.):5 (dual ports)* Electrical Controls - Magnetic Starter:24V Magnetic* Fence Size (L x H/in.):46 x 5* Fence Travel (Major and Minor/in.):5-3/8 and 3-5/8* Height:53inch*…

    $8,675.99
  16. Powermatic® Shaper 3HP 1PH w/Digital Readout & Casters

    Powermatic® Shaper 3HP 1PH w/Digital Readout & Casters

    …allows observation of the entire cut* Table predrilled and tapped for feeder mounting in two locations* Fence has dual featherboards for work holding* Dual 4" ports for attachment to dust collection system Standard Equipment:* 3/4" and 1-1/4" interchangeable spindle collets * Spindle height digital…

    $3,674.99
  17. Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    …allows observation of the entire cut* Table predrilled and tapped for feeder mounting in two locations* Fence has dual featherboards for work holding* Dual 4" ports for attachment to dust collection system Standard Equipment:* 3/4" and 1-1/4" interchangeable spindle collets* Spindle height digital…

    $3,879.99
  18. Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 3PH w/Digital Readout & Casters

    …allows observation of the entire cut* Table predrilled and tapped for feeder mounting in two locations* Fence has dual featherboards for work holding* Dual 4" ports for attachment to dust collection system Standard Equipment:* 3/4" and 1-1/4" interchangeable spindle collets* Spindle height digital…

    $3,879.99
  19. Jet® Shaper with 1/2'' & 3/4'' Spindles

    Jet® Shaper with 1/2'' & 3/4'' Spindles

    …easy cutter set-up * 4" dust port connects to your collection system to keep your workplace dust and debris-free * Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access * Unique ratcheting style levers allow you to micro-adjust your fence assembly to your exact needs…

    0 Review(s)
    $2,024.00
  20. Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    Jet® 1.5HP Shaper, 1/2'' & 3/4'' Spindles

    …set-up* 4" dust port connects to your collection system to keep your workplace dust and debris-free* Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access* 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bits* Powerful…

    $1,119.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
Feedback X