Router Guide Rail

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain rail cuts. If you're after a cabinet door jig, look no further! Simply align material flush with the outside edge of the guide block and lock…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  2. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $95.00
  3. Connector for Festool Guide Rails

    Connector for Festool Guide Rails

    Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

    2 Review(s)
    $17.00
  4. Festool Guide Rail Accessory Kit with New T-Loc Systainer

    Festool Guide Rail Accessory Kit with New T-Loc Systainer

    …value of your FS guide rails when used with your Festool plunge saw or router. Quickly set angles for both mitered and compound cuts using the Angle Unit. Make accurate repeat cuts using the Limit Stop. Work more efficiently by attaching the included Deflector to the end of your rail to prevent your…

    1 Review(s)
    $210.00
  5. Rockler Round Rail and Stile Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round Rail and Stile Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece design of these bits allows you to…

    5 Review(s)
    $99.99
  6. Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank

    Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank

    …joints. This stile and rail set includes two arbors that can be disassembled for enhanced versatility. You can shim out the tenon cutter for a precision fit, and you can even rearrange the cutters to cut joints for glass doors. The guide bearings also allow you to rout curved rails, such as those in…

    $119.99
  7. Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  8. Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  9. Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  10. Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    This matched stile and rail bit set is factory set to guarantee a perfect fitting joint every time. Features a bearing-guided design that helps to eliminate dips and ensures a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2"…

    1 Review(s)
    $109.99
  11. Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is bearing-guided, you can also rout arched rails without a template or fence. Available in Chamfer,…

    1 Review(s)
    $69.99
  12. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is bearing-guided, you can also rout arched rails without a template or fence. Available in Chamfer,…

    1 Review(s)
    $69.99
  13. Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is bearing-guided, you can also rout arched rails without a template or fence. Available in Chamfer,…

    2 Review(s)
    $69.99
  14. Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    …carbide edges cut quickly and cleanly, keeping your router on track for a precision cut. Pair them with 1/4" flat panels or matching ogee raised panels for sturdy cabinet doors that will last indefinitely. * Two Flutes.* 5/8" ball bearing guides.* Groove: 3/8" D x 1/4" H. * Matches door style 1E503.

    $99.99
  15. Rockler Ogee Stile and Rail Router Bit Set - 1-5/8'' D x 1-3/32'' H x 1/2" Shank

    Rockler Ogee Stile and Rail Router Bit Set - 1-5/8'' D x 1-3/32'' H x 1/2" Shank

    …The K10 and K20 grade carbide edges cut quickly and cleanly, keeping your router on track for a precision cut. Pair them with 1/4'' flat panels or matching ogee raised panels for sturdy cabinet doors that will last and last. * Two Flutes* 8mm x 22mm ball bearing guides* Groove: 3/8''D x 1/4''H

    $129.39
  16. Rockler Specialty Molding Router Bits

    Rockler Specialty Molding Router Bits

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails. Features two flutes and ball bearing guides (3/8" guide for 91859, 1/2" guide for 91870).

    1 Review(s)
    From: $37.99
  17. Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    …will fine tune your setting to the nearest 0.001" for the cleanest, most precise joints imaginable. Included guide rail attachment allows you to use the router with Festool guide rails for dadoes, edge jointing and more. Accepts 1/4" and 8mm collets (included). Includes T-Loc Systainer #3. * True…

    $435.00
  18. Rockler Vertical Panel Router Bit Set With Wooden Case

    Rockler Vertical Panel Router Bit Set With Wooden Case

    …beaded profile on the stick work. The stile and rail cutters are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks—no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top…

    1 Review(s)
    $149.99
  19. Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    …In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured to Rockler's exacting standards, and include guide bearings to ensure proper relief to fit into the grooves of your rail and stile doors.

    2 Review(s)
    From: $64.99
  20. Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    …In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured to Rockler's exacting standards, and include guide bearings to ensure proper relief to fit into the grooves of your rail and stile doors.

    3 Review(s)
    From: $64.99
  21. Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    …with curved profiles, such as for arched doors or cathedral-style doors. Sometimes called Shaker panel raisers, these straight raised panel bits are manufactured to Rockler's exacting standards. They include guide bearings to ensure proper relief to fit into the grooves of your rail and stile doors.

    4 Review(s)
    From: $64.99
  22. Rockler Horizontal Panel Router Bit Set With Wooden Case

    Rockler Horizontal Panel Router Bit Set With Wooden Case

    …doors of nearly any size. The stile and rail cutters are full-height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top…

    5 Review(s)
    $149.99
  23. Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank

    Rockler 2-Pc. Rail/Stile Shaker Cutter Router Bit Set - 1/2" Shank

    …tight-fitting cope and stick joints for Shaker style door frames. Pair the door frame with a flat 1/4" panel, or utilize our 3-pc. Shaker Raised Panel router bit set (40432, sold separately), which features a matching bevel. Bearing-guided to prevent dips and ensure a perfect fit. Sturdy 1/2" shanks…

    $109.99
  24. Rockler No Drip Edge Router Bit - 1" Dia x 1-1/8" H x 1/2" Shank

    Rockler No Drip Edge Router Bit - 1" Dia x 1-1/8" H x 1/2" Shank

    …objects. In addition, the round over is pleasing to the eye and to the touch, and provides a comfortable edge to rest against. The bearing guide makes the bit easy to use. Simply apply a separate edge molding with enough projection for the profile, then rout along the edge to create the drip rail.

    0 Review(s)
    $47.99
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X