Router Mortise

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
  1. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …surface between your router and the clamp guide, and reduces clamp guide set up time.* Adjustable Mortising: Install the included mortising pins to cut "centered and off centered" mortises. Microadjust wheel allows you to precisely control the actual width of the mortise.* Ant-Tilt Support:…

    7 Review(s)
    $79.99
  2. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    …four square tenon sizes: 1/4", 5/16", 3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown. Technical Details:* Includes 1/4", 5/16", 3/8" and 1/2" square tenon…

    $72.49
  3. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …bearing-guided mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as…

    0 Review(s)
    From: $22.47
  4. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided router bit. Designed to be used on…

    $37.99
  5. DeWalt DWP611PK Compact Router

    DeWalt DWP611PK Compact Router

    A light, ergonomic compact router with variable speed control, plus a full-featured plunge base-the ultimate handheld powerhouse! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. LED lighting in base with clear…

    3 Review(s)
    $199.00 $149.99

    SAVE 25%

  6. Mortise Centering Router Base

    Mortise Centering Router Base

    …and cut your mortise - perfectly centered every time!* Plate is constructed of 1/4" Acrylic with 1-1/2" opening, and is transparent for visibility.* Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises.* Predrilled hole…

    10 Review(s)
    $14.99
  7. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router bits.

    $383.99
  8. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …you can use a plunge router, you can cut strong, perfectly fitting mortise and tenon joints in no time. Easily rout single, double, twin, quadruple or even triple mortise and tenon joints, plus angled and compound-angled joints, in stock up to 3" x 5". Virtually any plunge router will fit and still…

    8 Review(s)
    $1,049.00
  9. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …with your plunge router to cut the mortise, then the tenon with the same setup* Handles wood thicknesses from 1/2" to 1-1/2"* Includes bushings to cut 1/4", 1/2", and 3/8" mortise and tenons* Cuts mortise and tenon joints from 1" to 3" wide* Included bushings allow your plunge router to follow the…

    6 Review(s)
    $159.99
  10. Leigh Super FMT  Accessory Kit

    Leigh Super FMT Accessory Kit

    Bring the versatility of over 70 mortise and tenon size settings to your Leigh FMT or Super FMT Jig. Kit includes a Vacuum Box, two hose adaptors and three HSS bits; 1/4", 3/8" and 1/2". Also includes eight 1/4" guides, four 3/8" guides and four 1/2" guides.

    $215.00
  11. Woodworking with the Router Book

    Woodworking with the Router Book

    …regarded and best-selling router manual available! Hundreds of large, clear photos and drawings - now in full color - show you everything you need to know about using a router productively and safely. Packed with the techniques and tricks you'll need to unleash your router's incredible potential. *…

    3 Review(s)
    $24.95
  12. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.* 16,000-35,000 RPM. The Colt is perfect for hinge mortising, edge forming, slot cutting, dovetailing, window cutouts, decorative…

    23 Review(s)
    $129.99
  13. Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  14. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x…

    $29.99
  15. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    …joinery applications like mortises, and dadoes.* Designed with deep center gullets for maximum material removal without chip loading.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    2 Review(s)
    From: $18.47
  16. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …any size mortise and tenon from a tiny 1/16" x 1/8" to a massive1/2" x 5". Includes five 5/16" joint guides (5/16" by 1/2", 3/4", 1", 1-1/4" and 1-1/2"), that can make over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that attaches to virtually any plunge router* Joint…

    3 Review(s)
    $529.00
  17. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Upward spiral is perfect for ejecting chips from mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide…

    1 Review(s)
    From: $51.47
  18. Porter Cable 450 Compact Router, Fixed Base

    Porter Cable 450 Compact Router, Fixed Base

    This new compact router from Porter-Cable offers the comfortable ergonomics of a trim router with the power and features of its full-sized brethren. With 1-1/4 hp, it's perfect for a variety of tasks, from trimming laminate, cutting flutes, edge profiling and even mortising with the plunge base…

    2 Review(s)
    $129.00
  19. The Best of Woodworker's Journal, 3 Book Set

    The Best of Woodworker's Journal, 3 Book Set

    …increasing your storage space with the 16 stunning projects in Cabinets and Storage Solutions. To make each project run without a hitch, the 30 router tables, workbenches and compact storage solutions in Workshop Projects will have your shop running like a finely-tuned machine. Each project is…

    $59.85
  20. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    …perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours! * 1/2" shank…

    1 Review(s)
    $51.99
  21. Rockler Hinge Mortising Router Bits - 1/2" Shank

    Rockler Hinge Mortising Router Bits - 1/2" Shank

    Use this mortising bit for insetting hinge leaves, stair treads, and for general purpose routing of large shallow recesses. The shorter length of the cutter makes it easy to pull the bit back far enough for very shallow mortises.

    From: $16.99
  22. Rockler Hinge Mortising Router Bit - 1/2" Dia x 3/4" H x 1/4" Shank

    Rockler Hinge Mortising Router Bit - 1/2" Dia x 3/4" H x 1/4" Shank

    Use this mortising bit for insetting hinge leaves, stair treads, and for general purpose routing of large shallow recesses. The shorter length of the cutter makes it easy to pull the bit back far enough for very shallow mortises. 1/4" shank.

    1 Review(s)
    $16.99
  23. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple joints in virtually any layout, in stock up to 24" wide. Mortises and…

    $268.99
  24. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    Router with Shop-Built BasesPart Two - Router Tables * Router-Table Basics * A Versatile Router Table* Space-Saving Router Table * Rock-Solid Router TablePart Three - Router Jigs and Techniques * Handheld Routing* Essential Jigs for the Router Table * Five Smart Router Jigs * Versatile Mortising Jig…

    $21.95
  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X