Router Table Template

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Rockler Router Plate Template

    Rockler Router Plate Template

    …custom fit for your router table plate with this easy-to-use template. With an 8-1/4" x 11-3/4" design, it is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our…

    15 Review(s)
    $10.99
  2. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    …smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes, sliding dovetail joints for table and leg extensions, or sliding drawer…

    3 Review(s)
    $19.99
  3. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.* IMPORTANT SAFETY NOTE: Do not invert any of the cutters! Be sure the carbide is facing the right direction for the rotation of the router.

    1 Review(s)
    $69.99
  4. Kreg Precision Router Table System

    Kreg Precision Router Table System

    Much like the rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two…

    1 Review(s)
    $499.00
  5. Router Edge Guide

    Router Edge Guide

    …50% compared to other edge guides! Perfect for simple flutes, dados rabbets, and more. The Plexiglas tool is easy to set and adjusts from 0 to 7 inches. The 3/4 inch x 5/8 inch fence can be used on a table surface. Technical Details:* Adjusts from 0 to 7"* 3/4 inch x 5/8 inch fence* 2" diameter hole

    1 Review(s)
    $37.99
  6. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  7. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    router table insert plates. Utilizing your router's base plate and the easy to use template (included), mounting the insert plate to almost any router leaves you with a perfect custom fit and without all of the extra holes you don't need!Also available from Rockler, the Kreg Precision Router Table

    $179.00
  8. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …BasesPart Two - Router Tables * Router-Table Basics * A Versatile Router Table* Space-Saving Router Table * Rock-Solid Router TablePart Three - Router Jigs and Techniques * Handheld Routing* Essential Jigs for the Router Table * Five Smart Router Jigs * Versatile Mortising Jig * Templates Guide the…

    $21.95
  9. Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops)

    Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops)

    Router Plate Leveling and Locking Hardware Pack consist of 8 each 40mm confirmats for leveling your router plate and 2 each threaded inserts for securing your plate to the table.

    $6.49
  10. Router Raizer

    Router Raizer

    …depth-of-cut adjustments with your plunge router. The Router Raizer lets you work from both the topside and underside of your router table. Router plate shown not included. With the Router Raizer no special insert is required (or included) - use any router plate from 3/16" to 1/2" thick will do the…

    15 Review(s)
    $104.99
  11. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and…

    From: $17.99
  12. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and…

    From: $15.99
  13. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    …as well.* 3/4" diameter body and full 1" or 2" cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on portable or table-mounted routers for template work.

    3 Review(s)
    From: $32.97
  14. Woodworking with the Router Book

    Woodworking with the Router Book

    …frames, and raise panels* Cut strong, practical joints of all kinds - dadoes, rabbets, laps and half-laps, dovetails and sliding dovetails, mortise-and-tenon* Make simple, accurate jigs and fixtures* Design, make and use templates to cut joints and shape parts* Design, build and use a router table

    3 Review(s)
    $24.95
  15. Bosch 1617EVSPK Router Combo Package

    Bosch 1617EVSPK Router Combo Package

    …fixed base can be used above or under the router table.* Wide openings in bases and sub-bases allow use of larger bits and provide better visibility.* Precision centering design makes it easy to keep bit on intended cut line when using jigs, templates, dovetail fixtures and similar guidance…

    $229.99
  16. Rockler Classic Fluted Plunge Router Bits

    Rockler Classic Fluted Plunge Router Bits

    An upper ball bearing guide allows you to use this decorative plunge bit for template routing in the middle of a workpiece, or you can mount it in a table for edge treatments. Pairs a cove with a round over for an attractive finished look.

    3 Review(s)
    From: $37.99
  17. Bill Hylton's Ultimate Guide to the Router Table, Book

    Bill Hylton's Ultimate Guide to the Router Table, Book

    …the most out of your router table. Hylton shares his secrets on how to build and set up your router table and jigs for perfect joinery, profile cuts, making raised panel doors and more. 128 pages. This end-all, be-all book on routing tables and the versatile router offers a wealth of insights…

    1 Review(s)
    $24.99
  18. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $20.47
  19. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $31.97
  20. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $22.97
  21. Rockler Vertical Panel Router Bit Set With Wooden Case

    Rockler Vertical Panel Router Bit Set With Wooden Case

    …rail cutters are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks—no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. All bits have sturdy 1/2" shanks for…

    1 Review(s)
    $149.99
  22. Rockler Horizontal Panel Router Bit Set With Wooden Case

    Rockler Horizontal Panel Router Bit Set With Wooden Case

    …rail cutters are full-height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. The panel raiser features a 5/8" radius ogee…

    5 Review(s)
    $149.99
  23. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  24. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with this flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all…

    From: $18.97
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X