Router Bit Bearings

  • Items 1 - 24 of 144
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Router Bit Tune-up Kit

    Rockler Router Bit Tune-up Kit

    bearings, lock nuts, stop collars, screws and allen wrenches. Comes in a convenient plastic storage case. Bits not included. Kit contains:* 1 — 1/2" i.d.x 3/4" o.d bearing* 1 — 1/4" i.d x 1/2" o.d bearing* 1 — 1/4" i.d x 5/8" o.d bearing* 1 — 3/16" i.d x 3/8" o.d bearing* 1…

    1 Review(s)
    $47.99
  2. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as…

    From: $22.97
  3. Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    …guide bearings make it easy to get a consistent depth of cut, and also allow you to machine joints for curved parts.* Designed to cut a tongue and groove joint for 3/4" stock. * Depth of groove is 3/8".* Ball bearing guide lets you follow the material. * Includes one arbor, two 22mm bearings, and…

    10 Review(s)
    $57.99
  4. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as…

    From: $31.97
  5. Rockler Biscuit Cutter Router Bit Set - 1-27/32" Dia x 5/32" H x 1/4" Shank

    Rockler Biscuit Cutter Router Bit Set - 1-27/32" Dia x 5/32" H x 1/4" Shank

    Biscuit cutters can be expensive. Luckily you can now save space and money by letting your router do the job! This Biscuit Cutter Router Bit Set includes a special slotting cutter and three bearings sized to cut biscuit slots for #0, #10 and #20 size biscuits. The slotting cutter has a baked-on…

    7 Review(s)
    $44.99
  6. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, cross-grain and figured grain on hardwoods. Dual bearings mounted at both top…

    13 Review(s)
    $42.99
  7. Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    …a 22mm bearing set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life. Top quality bits that meet…

    14 Review(s)
    $36.99
  8. Freud® Three Wing Slot Cutters

    Freud® Three Wing Slot Cutters

    …60-100 for 1/4" shanks (48361, sold separately) and 60-102 for 1/2" shanks (48814, sold separately). Compatible with 62-108 bearing. Cutter 56-109 can be used for biscuit joining. Cuts all composite materials, plywoods, hardwoods and softwoods. Use on handheld and table-mounted portable routers.

    From: $19.47
  9. Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    …a 22mm bearing set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life. Top quality bits that meet…

    15 Review(s)
    $35.99
  10. Freud® 63-162 Slotting Cutter Router Bit - 2" Dia x 1/4" H x 1/2" Shank

    Freud® 63-162 Slotting Cutter Router Bit - 2" Dia x 1/4" H x 1/2" Shank

    Includes three wing slotting cutter, arbor and ball bearing. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $26.97
  11. Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

    …Motor Voltage:230/460V* Net Weight:1100pound* Overall Dimensions:51 x 44 x 53* Part Number:1791284* Prewired:Prewired 230V* Reversable:Yes* Router Bit Collet Diameter (in.):1/4 and 1/2* Ship Weight:1280pound* Slide Table Size (in.):11-1/4 x 51-1/4* Spindle Diameter (in.):3/4, 1, and 1-1/4* Spindle…

    $8,675.99
  12. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    These bits include a set of bearings, which are installed to achieve a range of rabbet depths. Use them for joinery applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the…

    2 Review(s)
    From: $42.47
  13. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  14. Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    …guide bearing on this router bit makes it ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well…

    $27.97
  15. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    …a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and features…

    6 Review(s)
    $44.99
  16. Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    …edge, so the bit self-pilots against the substrate. Without the need a bearing guide, you won't have to worry about contact cement gumming up the ball bearings. Use on hand-held routers, table-mounted portable routers, and laminate trimmers. * The Freud 66-100 solid carbide bit creates a 7-degree…

    $9.47
  17. PG2000 Router Bit Bearing Lube Pen

    PG2000 Router Bit Bearing Lube Pen

    Apply lubrication to router bit bearings, table saw trunnions, drill press gears and more with pin-point accuracy. Provides long lasting, smooth operation of any metal-to-metal mechanism. Lubricant also penetrates and cleans moving parts.

    2 Review(s)
    $3.99
  18. Rockler Dish Carving Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank

    Rockler Dish Carving Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank

    The integral guide bearing on this Dish Carving Bit makes it easy to creat custom bowls and trays in any shape you can cut a template for. Features a carbide tip that's been final sharpened with an 800 grit diamond wheel for smooth cutting. Use it to remove large amounts of wood with minimal effort.…

    $42.99
  19. Rockler Shutter Louver Router Bits - 1/2" Shank

    Rockler Shutter Louver Router Bits - 1/2" Shank

    Use our Louver Router Bits to create your own shutter louvers in 2-1/2" or 3-1/2" widths. The louvers interface seamless with other elements of the Rockler Shutter System. The included ball-bearing guide runs along the middle of the shutter slat—just rout one side, then turn the slat around to…

    0 Review(s)
    From: $41.99
  20. Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 32-504 Rabbeting Bits, 1-3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    …Steel pilots can be removed from bits and used with edge guides for wider rabbets. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers. * Rockler numbers 31421, 33592 include multiple bearings for multiple rabbeting depths:…

    $57.47
  21. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  22. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  23. Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    …and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.47
  24. Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    …Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4"…

    0 Review(s)
    $195.97
  • Items 1 - 24 of 144
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X