Router Bit Sets

  • Items 1 - 24 of 169
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    This set is a veritable variety pack of the most-used bits for woodworkers, including three sizes of straight bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow…

    2 Review(s)
    $220.47
  2. Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  3. Freud 97-154, 3-Piece Door Set

    Freud 97-154, 3-Piece Door Set

    Set contains Premier Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for…

    3 Review(s)
    $183.47 $128.42

    SAVE 30%

  4. Rockler 5-Pc. Starter Bit Set

    Rockler 5-Pc. Starter Bit Set

    With two joinery bits for basic dados and rabbets, plus three bearing-guided edge profiling bits, this five-piece router bit set will cover the bases for both solid structure and visual embellishment. All bits have 1/2" shanks to reduce chatter and provide maximum performance. A convenient storage…

    $149.99
  5. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  6. Freud 97-254, 3-Piece Door Set

    Freud 97-254, 3-Piece Door Set

    Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door…

    $183.47
  7. Freud 97-152, 3-Piece Door Set

    Freud 97-152, 3-Piece Door Set

    Set contains premier adjustable quarter round rail and stile bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for…

    $183.47
  8. Freud 97-258, 3-Piece Door Set

    Freud 97-258, 3-Piece Door Set

    Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door…

    2 Review(s)
    $201.97
  9. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    …rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with efficient chip ejection.…

    5 Review(s)
    $59.99
  10. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece Straight Bit Set (sold separately, 60579) using your router. Technical…

    16 Review(s)
    $119.99
  11. Kreg® Precision Setup Bars

    Kreg® Precision Setup Bars

    …and easy bit height adjustments* Step gauge: Test the depth of your cut after each pass* Seven set-up bars: 1/8" (.125), 3/16" (.188), 1/4"(.250), 5/16" (.313), 3/8" (.375), 7/16" (.438), 1/2" (.500)* Each individual bar is made from soft aluminum designed to prevent damage to your router bit or saw…

    3 Review(s)
    $41.99
  12. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    1 Review(s)
    From: $51.47
  13. Freud 3-Piece Undersized Plywood Router Bit Sets

    Freud 3-Piece Undersized Plywood Router Bit Sets

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  14. Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    Freud # 89-152 5-Piece Round Over Router Bit Set, 1/2'' Shank

    …over router bits create some of the most commonly used edge profiles in the wood shop, and with all the most popular sizes included, this set represents an excellent value. The set included a 1/2" bearing for rounding over operations, and an additional 3/8" bearing, which converts all five bits into…

    $117.97
  15. Horizontal Panel Router Bit Set With Wooden Case

    Horizontal Panel Router Bit Set With Wooden Case

    This rail-and-stile set includes everything you need to create raised-panel doors of nearly any size. The stile and rail cutters are full-height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks no need to sand or joint before routing. In…

    5 Review(s)
    $149.99
  16. Undersized Plywood Router Bit Set

    Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  17. 45° Lock Miter Router Bit -1/2'' Shank

    45° Lock Miter Router Bit -1/2'' Shank

    …the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. To make setting the cutter height easy and fool-proof, use the Rockler Router Bit Set-up…

    20 Review(s)
    $57.99 $39.99

    SAVE 31%

  18. Router Speed Control

    Router Speed Control

    New router speed control allows for a wide range in speeds to match your application.* Get the appropriate speed to match the router bit and application without investing in an expensive variable speed router!* Set the rate from 0 RPM to full speed.* Use on brush-type motor routers up to 3 HP, 20…

    17 Review(s)
    $52.99
  19. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer or 1/2-inch roundover. There's no need to remove the parts to machine them again on a traditional router

    $199.99
  20. Rockler 3-Pc. Roundover/Beading Bit Set

    Rockler 3-Pc. Roundover/Beading Bit Set

    This handy set consists of the most commonly used roundover bits: 1/4", 3/8" and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a…

    4 Review(s)
    $89.99
  21. Incra Universal Precision Positioning Jig

    Incra Universal Precision Positioning Jig

    …stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig.* Router bits sold separately. The #91023 1/2" diameter dovetail bit and the #90462 3/8" straight bit provide most all of the dovetail and box cuts that you'll ever need to make.

    2 Review(s)
    $69.99
  22. Rockler Rabbeting Bit Set

    Rockler Rabbeting Bit Set

    …1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting…

    1 Review(s)
    $49.99
  23. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  24. Freud Four Piece Undersized Plywood Bit Set

    Freud Four Piece Undersized Plywood Bit Set

    …the unsightly gaps that result from standard sized bits. Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    5 Review(s)
    $79.97
  • Items 1 - 24 of 169
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X