Router Bit With Bearing

  • Items 1 - 24 of 115
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    With a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and…

    6 Review(s)
    $44.99
  2. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with

    From: $17.99
  3. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  4. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …mortising bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    0 Review(s)
    From: $22.47
  5. Rockler Roundover/ Beading Router Bits - 1/2" Shank

    Rockler Roundover/ Beading Router Bits - 1/2" Shank

    …For a bit more definition, just switch the bearing to the beading mode. Shear angle provides the smoothest cut available.* Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.* Items with * in the description are larger bits that should be used in router tables…

    13 Review(s)
    $65.79 From: $29.99

    SAVE 54%

  6. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with

    From: $34.47
  7. Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    Freud® Rabbeting Router Bits With Bearings - 1/4" Shank

    …and letting in back panels.* Produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.47
  8. Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    …Adjustable Quarter Round Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4"…

    0 Review(s)
    $195.97
  9. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    2 Review(s)
    From: $42.47
  10. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free project plans from Vectric* Travel: X: 13" Y: 24" Z: 4.5".* High Speed traverse rate: 200 ipm* Bearings: 12 precision linear bearing

    21 Review(s)
    $2899.99
  11. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  12. Rockler Ogee Fillet Router Bit - 1-5/8" Dia x 11/16" H x 1/2" Shank

    Rockler Ogee Fillet Router Bit - 1-5/8" Dia x 11/16" H x 1/2" Shank

    Our Ogee Fillet Bit combines a graceful ogee curve with a subtle fillet for added definition along the edge. Use for table edges and other decorative elements for cabinetry and furniture. Bearing guided with twin flutes for smooth profiles.

    1 Review(s)
    $44.99
  13. Rockler Rabbeting Router Bit Set - 1/2" Shank

    Rockler Rabbeting Router Bit Set - 1/2" Shank

    With a full 1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest…

    1 Review(s)
    $49.99
  14. Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
    $89.99
  15. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! No need to strain your back lifting and balancing a large…

    5 Review(s)
    $49.99
  16. PG2000 Router Bit Bearing Lube Pen

    PG2000 Router Bit Bearing Lube Pen

    Apply lubrication to router bit bearings, table saw trunnions, drill press gears and more with pin-point accuracy. Provides long lasting, smooth operation of any metal-to-metal mechanism. Lubricant also penetrates and cleans moving parts.

    2 Review(s)
    $3.99
  17. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    …flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all composition materials, plywoods, hardwoods,and softwoods.* Use on portable or table-mounted routers.

    From: $18.97
  18. Rockler Vertical Panel Router Bit Set With Wooden Case

    Rockler Vertical Panel Router Bit Set With Wooden Case

    …goes well with the beaded profile on the stick work. The stile and rail cutters are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks—no need to sand or joint before routing. In addition, they feature guide bearings for template…

    1 Review(s)
    $149.99
  19. Rockler Horizontal Panel Router Bit Set With Wooden Case

    Rockler Horizontal Panel Router Bit Set With Wooden Case

    …that if you jog your router table fence, they can be used to joint off saw marks no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. The panel raiser features a 5/8" radius ogee profile that goes well with the beaded profile…

    5 Review(s)
    $149.99
  20. Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes…

    $79.99
  21. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    with designated spots for each bit. 1/2-inch shanks. Cuts parts to correct dimension and shape, and applies an edge profile - all in one shot! No need for a bearing guide means no gummed up bearings, and no marks on the edge of your work piece from bearings that don't spin well. All five CNC router

    $199.99
  22. Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    …and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a convenient and attractive storage box with a hex key for switching out the bearings.

    4 Review(s)
    $89.99
  23. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …2-3/8" Round Over Router Bit:* Freud #: 34-124* Overall Diameter (A): 1-1/4"* Bearing Diameter: 1/2"* Carbide Height (B): 5/8"* Shank (C): 1/2"* Radius (R): 3/8"* Overall Height: 2-5/8" Beading Router Bit:* Freud #: 36-124 (This is the same as 34-124 above, but with 3/8" bearing installed)* Overall…

    $98.97
  24. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock…

    $176.47
  • Items 1 - 24 of 115
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X