Router Box Joint Jig

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. * For compatibility, the…

    60 Review(s)
    $79.99
  2. Leigh Accessory Kit for R9 Plus Joinery System

    Leigh Accessory Kit for R9 Plus Joinery System

    Create traditional hand-crafted joinery using box joints, half-pitch through dovetails, or through dovetails with this Leigh Accessory Kit for the Leigh R9 Plus Joinery System! Technical Details:* Makes it easy to create perfect box joints, through dovetails, and half pitch through dovetails* HSS…

    $99.00
  3. 45° Lock Miter Router Bit -1/2'' Shank

    45° Lock Miter Router Bit -1/2'' Shank

    …is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. To make setting the cutter height easy and fool-proof, use the Rockler Router Bit Set-up Jig (53817, sold separately)…

    20 Review(s)
    $57.99 $39.99

    SAVE 31%

  4. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  5. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  6. Box Joint Cauls 12-Pc. Set

    Box Joint Cauls 12-Pc. Set

    Make perfect joints with our Box Joint Jig and NEW Cauls! Uniformly spaced pressure points clamp individual box joint fingers at the corners togive you the tightest joints possible. Simply align the pressure points with box jointfingers and tighten in place with one or more Deluxe Ratcheting Band…

    9 Review(s)
    $32.97
  7. Incra Universal Precision Positioning Jig

    Incra Universal Precision Positioning Jig

    The Original Incra Jig:* Even the novice woodworker can produce beautiful joinery on the router table.* Easily create joints such as dovetails, box and double dovetails with precision.* Comes with FREE 1-hour instructional DVD and joint-making templates ($19.99 Value)* Fence, stop block and right…

    2 Review(s)
    $69.99
  8. 14° Dovetail Pattern Router Bit

    14° Dovetail Pattern Router Bit

    …operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and…

    3 Review(s)
    $19.99
  9. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados.* Patented alignment lines and router bit depth stop allow for quick, easy set-up* Handles stock from 1/4" to 1-1/8" thick and up to 12" wide* Comes with easy-to-mount, heavy-duty steel base;…

    $187.99
  10. Leigh R9 Plus Joinery System

    Leigh R9 Plus Joinery System

    …and 1/2"* Two dovetail joint pitches - 1-1/2" and 3/4"* Cut Box Joints on any board thickness up to 1" in three different sizes (3/16", 3/8", and 3/4")* No jig adjustments* Joint fit is controlled by patented eBush* Works on your router table or with a standalone router* Adjustable width clamping*…

    7 Review(s)
    $169.00
  11. Replacement Router Bit for Porter-Cable Dovetail Jig

    Replacement Router Bit for Porter-Cable Dovetail Jig

    This is a replacement straight router bit for the 4212 Porter-Cable 12" Dovetail Jig (29550, sold separately). Use it for box joints. Two flutes for optimal chip removal, with an overall Length of 2-1/2". Diameter is 13/32" and carbide height is 1".

    1 Review(s)
    $17.99
  12. 4210 Porter-Cable 12'' Dovetail Jig

    4210 Porter-Cable 12'' Dovetail Jig

    …bars hold the workpiece firmly in place. The jig accommodates stock from 1/4" to 1-1/8" thick and includes a 1/2" shank, carbide-tipped dovetail bit. Additional templates, sold separately, are available to create through dovetails, box joints and miniature dovetails (see More Info for details).…

    2 Review(s)
    $136.49
  13. VRS Vacuum and Router Support for the Leigh Dovetail Jigs

    VRS Vacuum and Router Support for the Leigh Dovetail Jigs

    …system (Vacuum and Router Support) will make your dovetail routing a dust-free experience. The vacuum chute is easily attached to any Leigh jig and glides effortlessly from side to side on nylon rollers. It automatically follows the router when routing the joint or when the router is parked off to…

    7 Review(s)
    From: $84.00
  14. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …provides matching joint halves with the ease and accuracy of the new Leigh FMT! Named one of Workbench Magazine's Top 10 Innovative Tools of 2004, the FMT Jig allows you to rout both parts of the joint with just one joint guide, one router bit and one jig setup. Make perfect joints for everything…

    8 Review(s)
    $1049.00
  15. Woodworker's Journal Router Projects CD

    Woodworker's Journal Router Projects CD

    …Field Guide to Choosing a Router * Build the Ultimate Fluting Jig * Dust Collecting Router Table Fence * Router Bits: Cost, Quality and Value * Eclectic Blanket Chest * Six Tips for Avoiding Router Tearout * Box Joints on the Router Table * Modular Shelf System * Router Bit Cabinet with Pull-out…

    $12.59
  16. Distinctive Series Dovetail Router Bits, 8mm Shank

    Distinctive Series Dovetail Router Bits, 8mm Shank

    These top-quality carbide bits work with wood thicknesses ranging from 1/8" to 5/8", allowing you to cut joints for delicate jewelry boxes, as well as for sturdy drawers. They are ideal for use with our Distinctive Series Dovetail Templates (sold separately). 8° dovetail angle offers a more…

    2 Review(s)
    From: $17.99
  17. 4 Piece 8mm Dovetail Router Bit Upgrade

    4 Piece 8mm Dovetail Router Bit Upgrade

    …in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2" x 14° and 8° dovetail bits, a 5/16" straight bit, and 1/2" to 8mm collet adapter. The straight bit can be used for box joints, or for cutting grooves and dados. Fits all existing Rockler dovetail jigs.

    1 Review(s)
    $54.99
  18. Leigh ACMTC Accessory Kit

    Leigh ACMTC Accessory Kit

    …and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and tenon joints. This kit includes…

    1 Review(s)
    $379.00
  19. Woodworker's Journal Workshop Projects CD

    Woodworker's Journal Workshop Projects CD

    …The Most Versatile Shelf-pin Jig* A Traditional European Workbench* Custom Router Table* Lathe Steady Rest* Downdraft Sanding Box* Outfeed/Assembly Table* Adjustable Dado Jig* Miter Saw Station* Adjustable Box Joint Jig* All-Purpose Shop Table* Adjustable V-block Jig* Ultimate Sharpening Station*…

    $15.79
  20. The Best of Woodworker's Journal, 3 Book Set

    The Best of Woodworker's Journal, 3 Book Set

    …Station* Rolling Router Table* Deluxe Drum Sander* Drum Sanding Station* Shop-Built Disc Sander* Sanding Disc Caddy* Quick and Easy Band Saw Fence* Scroll Saw Blade Caddy* Sliding, Circle-Cutting Band Saw Jig.* Magnetic Drill Press Vise* Adjustable Dado Jig* Veneer Jointing Jig* Customized Portable…

    $59.85
  21. The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    …Measuring Tools and How They Work* Mortise and Tenon Joints* Hand-Cut Joints: Dovetail* Machine-Cut Joints* Jigs and Assembly Aids* Tapering and Carving* Making Drawers* Hardware Options* How a Plane Works* Table Saw Safety* Guiding Your Router* Full-size Mock-ups* Introduction to Drawings*…

    $19.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X