Router Edge Guide

  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
  1. Porter-Cable Micro-adjust Edge Guides

    Porter-Cable Micro-adjust Edge Guides

    Guide provides an accurate edge guide to help you make straight, precise cuts. Built with an anodized, extruded aluminum body for extra strength. The dual sliding body also has lockable mounts to allow for easy operation. Includes all mounting hardware. Compatible with a host of Porter-Cable routers

    3 Review(s)
    $49.99
  2. Router Edge Guide

    Router Edge Guide

    Save more than 50% compared to other edge guides! Perfect for simple flutes, dados rabbets, and more. The Plexiglas tool is easy to set and adjusts from 0 to 7 inches. The 3/4 inch x 5/8 inch fence can be used on a table surface. Technical Details:* Adjusts from 0 to 7"* 3/4 inch x 5/8 inch fence*…

    1 Review(s)
    $37.99
  3. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …and finish quality. You can also add the CRB7 Edging Trim Kit (45052, sold separately) for the ability to trim solid wood edging or edging tape without having to run your router on the narrow edge of the material. The CRB7 fits all routers with edge guide rod drillings, and unlike similar jigs, it…

    7 Review(s)
    $79.99
  4. Rockler Universal Router Base

    Rockler Universal Router Base

    …rounded edges, inlays and more with this 3/8" thick clear acrylic base with a 1/2" thick reversible edge guide. .* Base is 12"L overall, predrilled to fit most popular routers and can easily be drilled to fit others.* Two separate attachment points allow you to rout 0-5" from the edge.* Accepts all…

    5 Review(s)
    $44.49
  5. Parallel Edge Guide for Festool MFK 700 Router

    Parallel Edge Guide for Festool MFK 700 Router

    …700 Multifunction Router, the Parallel Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of…

    $57.00
  6. Router Edge Guide for Porter Cable 690 Router

    Router Edge Guide for Porter Cable 690 Router

    …Porter-Cable standard router edge guide provides controlled cuts for consistent results. It uses the straight edge of the work-piece to guide the router for edge cuts, as well as inside cuts.* Easy to set up and adjust with simple thumbscrew clamps.* Fits Porter-Cable routers, models 100, 150, 350,…

    1 Review(s)
    $22.99
  7. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    Guides perpendicular to the edge.* Jaws measure 7/8'' high x 3-3/4'' wide.* Jaws include screws and pre-drilled holes for attaching additional additional wooden cauls for even better accuracy.* Compatible with A and C Series All-In-One Clamp Guides. All-In-One Clamp Guides: * A straight edge guide

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  8. MPower CRB7 Edging Trim Kit

    MPower CRB7 Edging Trim Kit

    Router Base (45924, sold separately). Together, they give you the ability to trim solid wood edging or edging tape without having to balance your router on the narrow edge of the material. Instead, the edging trim kit includes a bearing guide that runs against the narrow edge, while the router bit…

    $29.99
  9. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    …Details:* Ideal for use with your table saw, but can also be used with a router table for routing tapered profiles such as flutes and bevels.* Jointing function lets you use the tapering jig to put a perfectly straight edge on rough-sawn boards.* Patent pending Microdial Colormatch System lets you…

    $139.99
  10. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …when trimming edges.* All-metal straight-edge guide directs router along edges of workpiece or up to 3-5/8" from edge.* Fast and precise depth adjustment system with micro-fine adjustment dial.* Accepts 1/4" shank bits.* Includes motor, aluminum fixed base, straight-edge guide, 1/4" self-releasing…

    23 Review(s)
    $129.99
  11. All in One Clamp Guide Package, While Supplies Last!

    All in One Clamp Guide Package, While Supplies Last!

    …Contractor Series clamp guides possess some unique features.* Simple to adjust* Features locking clamp pads* Four lever positions for variable clamping strength* Two clearly labeled scales in 1/8" graduations* The perfect woodworking combination clamp and edge guide system!* Wide body construction…

    37 Review(s)
    $159.99
  12. Rockler Power Tool Guide Kit For Straight Edge System

    Rockler Power Tool Guide Kit For Straight Edge System

    …12" Acrylic Base (sold separately, sku: 42279) and the Rockler Straight Edge System (sold separately: sku: 36495)!* Keeps your router or circular tracked to the Rockler Straight Edge System* Dedicate one sled for each router or circular saw you own for precision cutting or routing every time*…

    1 Review(s)
    $6.99
  13. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …stability! Wide lever handles and a click-lock sliding jaw make it simple to position and secure these clamps for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. A very low 17/32" profile body and flat top allow many applications without…

    89 Review(s)
    From: $41.99
  14. Rockler Bevel Router Bit - 1/4" Shank

    Rockler Bevel Router Bit - 1/4" Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  15. Edge Routing Dust Port

    Edge Routing Dust Port

    …routing small decorative edges - among the most common routing jobs woodworkers encounter! Offers easy tool-free installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2" O.D. dust port.* Installs easily onto any router baseplate that accepts a…

    18 Review(s)
    $15.99 $11.99

    SAVE 25%

  16. Dewalt DW621K Heavy-Duty 2 HP maximum motor HP EVS Plunge Router Kit

    Dewalt DW621K Heavy-Duty 2 HP maximum motor HP EVS Plunge Router Kit

    …set ups* Integral dust collection system efficiently removes chips and provides superior bit visibility Includes: * edge guide w/dust collection* 1/4" and 1/2" collets* template guide bushing adapter* wrench* heavy-duty kit box Features & Benefits: * Full wave electronic variable speed motor with…

    $333.99
  17. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …flush with the outside edge of the guide block and lock into place with the post handle hold-down clamp and positionable locking knob. Abrasive strip locks the workpiece in place to avoid shimmy or movement. Run the jig along the fence until you cut into the 1" hardwood guide block, which eliminates…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  18. Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  19. Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    …Sub-Base Accepts Universal Template Guides* Plunge base incorporates fine-tune adjustment rod for precise depth setting* Up to 1.5" of depth travel with standard base and 2" with plunge base* Extended 8-Slot 1/4" Collet Maximizes Surface Contact with Router Bit Shank for a Tighter Grip* Fixed &…

    $189.00
  20. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …for working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and…

    7 Review(s)
    $79.99
  21. Rockler 12'' x 12'' Acrylic Base

    Rockler 12'' x 12'' Acrylic Base

    …when used with the Power Tool Guide Kit (sold separately, sku: 42173) and the Straight Edge System (sold separately, sku: 36495)!* 12" x 12" x 1/4" thick acrylic* Keeps your router or circular tracked to the Straight Edge System* Dedicate one base for each router or circular saw you own for…

    2 Review(s)
    $16.99
  22. Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    …story stick* Power tool guide (one included with system) rides in the straight edge for total control when cutting or routing* Additional power tool guides sold separately* Acrylic base (#42279, sold separately) for use with saw or routers requires the Power Tool Guide Kit (#42173, sold separately).

    21 Review(s)
    $89.99 $67.49

    SAVE 25%

  23. Edge Guide for Festool OF 1400 Router

    Edge Guide for Festool OF 1400 Router

    …the Festool OF 1400 Router, the Parallel Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of…

    2 Review(s)
    $75.00
  24. Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    …just for edge joining long boards or cabinet components. The guide bearings make it easy to get a consistent depth of cut, and also allow you to machine joints for curved parts.* Designed to cut a tongue and groove joint for 3/4" stock. * Depth of groove is 3/8".* Ball bearing guide lets you follow…

    10 Review(s)
    $57.99
  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X