Router Fence Accessories

  • Items 1 - 24 of 88
  • Page:
    1. 1
    2. 2
    3. 3
  1. Stop Block Kit

    Stop Block Kit

    Set it on the T-slot track for making the same length cuts over and over. You get a 5 star knob, a 1 1/2" long T-slot bolt and a 2" rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

    2 Review(s)
    $8.19
  2. Bench Dog® Router Table Pro Fence 32''

    Bench Dog® Router Table Pro Fence 32''

    This 3-1/2" tall fence features a precision machined aluminum frame for total flatness, as well as Universal T-Tracks on both the front and back of the aluminum spine. These tracks, which are perfect for attaching featherboards, stops, hold-downs, and more, accept any accessory with 1/4" t-bolts,…

    1 Review(s)
    $159.99
  3. Dust Bucket Dust Collection for Router Tables

    Dust Bucket Dust Collection for Router Tables

    The Router Table Dust Bucket will capture nearly all routing debris when you use both bucket and fence attachments with the Router Table Dual Port (20225) and your 4" dust collection system. 4" port can be mounted on the back or either side for convenient access. Enjoy maximum dust collection while…

    25 Review(s)
    $83.99 $69.99

    SAVE 17%

  4. Router Table Jointing Shims - 6 Pack

    Router Table Jointing Shims - 6 Pack

    Allows outfeed fence to be shimmed in .010" increments when using the router table to edge-joint boards.* Shims can be combined to shave .070" off an edge. * Designed for use with the Rockler router table fence.* Shims measure 2" high x 14" long.* Includes six plastic shims in these thicknesses:…

    15 Review(s)
    $6.99
  5. Rockler 3'' Fence Flip Stop

    Rockler 3'' Fence Flip Stop

    …of the way when you don't! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks.* Also available: Rockler Flip Stop for 2-1/4" fences (31214).* The Flip Stop measures 3/4" wide, 1/2" thick,…

    4 Review(s)
    $16.99
  6. 45° Lock Miter Router Bit

    45° Lock Miter Router Bit

    The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased…

    19 Review(s)
    $74.99
  7. Freud # 99-240 Drawer Lock Bit, 2'' Dia. x 33/64'' H x 1/2'' Sh.

    Freud # 99-240 Drawer Lock Bit, 2'' Dia. x 33/64'' H x 1/2'' Sh.

    Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

    $40.47
  8. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    …6-Piece router table accessory kit includes three plate inserts with various bit openings for minimal clearance capabilities. Also included with each kit is three featherboards for better consistency and to prevent kickback ensuring safety during routing. Two of the featherboards mount to the fence,

    1 Review(s)
    $49.99
  9. Micro Adjuster for Router Table Fence

    Micro Adjuster for Router Table Fence

    Micro adjust your router fence for superior routing accuracy. Onboard clamp attaches to the router table and houses the finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either…

    7 Review(s)
    $22.99
  10. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    …of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the router table, and hold-down clamps made from scrap materials.

    4 Review(s)
    $34.99
  11. Bench Dog® ProTop Contractor Portable Router Table

    Bench Dog® ProTop Contractor Portable Router Table

    …dual position fence give it as much usable table surface as most full-size router tables. With 15" of inside cabinet height, it can house virtually any router. It includes a non-marring laminate top, Bench Dog's 22" ProFence with integral 2-1/2" dust port, an aluminum miter accessory track that…

    12 Review(s)
    $299.99
  12. Incra Miter Gauge V27

    Incra Miter Gauge V27

    …positive angle stops in 5° increments (+/- 60° range) and special stops at +/- 22-1/2°. * For use in any standard 3/4" x 3/8" miter slot* Universal mounting bracket will support any user-made fence as well as any Incra fence.* Includes removeable T-clip for use with T-shaped miter slots

    $67.99
  13. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …aluminum frame ensuring precise flatness and squareness to the table, The Rockler Pro Router Table Fence is the perfect foundation for accuracy in virtually any router table operation. The two melamine-coated MDF fence faces are adjustable for low- and zero-clearance routing, while the front- and…

    $139.99
  14. Rockler Retrofit Double Featherboard Kit

    Rockler Retrofit Double Featherboard Kit

    …existing Rockler Table Featherboard (#53677). Don't have a Rockler Featherboard yet? Purchase the retrofit kit with our Rockler Table Featherboard (available below) to make a double featherboard for applying pressure at the table level and at the top of the router table fence 3" above the table.

    3 Review(s)
    $9.99
  15. Mag-Dro® Mitre Slot Base

    Mag-Dro® Mitre Slot Base

    …table saw, router, bandsaw, and more.* Fits most 6" calipers* Connects and disconnects to your caliper in seconds* Can be used in a variety of 3/4" table slots or clamped or screwed to a flat surface* Enables fast and precise measuring using a fixed point* Use it to check fence squareness against…

    4 Review(s)
    $8.99
  16. Bench Dog® Cast Iron Router Table, Pro Fence & Plate

    Bench Dog® Cast Iron Router Table, Pro Fence & Plate

    …dust port on the back of the fence.* ProFence also features EZ-Load Universal T-tracks that accept 1/4" and 5/16" T-bolts as well as 1/4" hex bolts - perfect for hold-downs, stops and other accessories such as featherboards. Recommended for use with the Rockler Steel Router Cabinet with Dust Bucket…

    5 Review(s)
    $599.99
  17. Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    …6-Piece router table accessory kit includes three plate inserts with various bit openings for minimal clearance capabilities. Also included with each kit is three featherboards for better consistency and to prevent kickback ensuring safety during routing. Two of the featherboards mount to the fence,

    1 Review(s)
    $299.98 $249.99

    SAVE 17%

  18. Rockler Router Table Fence

    Rockler Router Table Fence

    …of the fence, and is perfect for attaching flip-down stops, hold-down clamps, or any other accessories with 1/4" T-bolts, 5/16" T-bolts, or 1/4" hex bolts. Two adjustable melamine-coated MDF faces round out this versatile, high-quality fence. Technical Details:* Ergonomic T-knobs for easy fence

    $84.99
  19. Ready2Rout Router Table Fence

    Ready2Rout Router Table Fence

    …precision, repeatable fence settings stored in memory, a pre-installed suite of apps, and many more to come, this first-ever electronic router fence ushers the humble router table into the "smart" era. Woodworkers used to endlessly tapping and bumping their fences will appreciate the ease…

    2 Review(s)
    $599.99
  20. Fence Featherboard

    Fence Featherboard

    …heavy duty T-bolts and large, easy-to-grip threaded knobs. Fits all Rockler T-slot fences and can be used with material up to 1-1/8" thick. Technical Details* Fits all Rockler T-Slot Fences* Ideal for router table and drill press operations* Includes large threaded star knobs for secure lockdown*…

    9 Review(s)
    $16.99
  21. Kreg Precision Router Table Fence

    Kreg Precision Router Table Fence

    …is only half the story. Taking cues from high-end table saw rip fences, the Kreg Precision Router Fence is the only fence on the market that utilizes a t-square style design that allows for fast and easy positioning of the fence and a cam style lockdown which keeps it perfectly parallel to the…

    $199.00
  22. Rockler 2-1/4'' Fence Flip Stop

    Rockler 2-1/4'' Fence Flip Stop

    Attaches to standard and universal T-tracks on 2-1/4" fences with included 5/16" T-boltand knob. Ideal for fences with top-mounted tracks. Set the stop at your desired measurement to create a square end for repeatable cuts and other tasks. Also available: Rockler Flip Stop for 3" fences (26991).

    9 Review(s)
    $16.99
  23. Drill Press Fence Stop Block

    Drill Press Fence Stop Block

    Drill concealed hinges with ease and accuracy - whether you're making one door or a hundred!

    $8.39
  24. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …opening in fence for big router bits.* Aluminum fence backer features front- and rear-mounted universal T-tracks that accept 5/16" T-bolts, 1/4" T-bolts, and 1/4" Hex bolts.* Fence features a 2-1/2" O.D. (2-1/4" I.D.) dust port 1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an…

    2 Review(s)
    $399.99
  • Items 1 - 24 of 88
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X