Router Mount

  • Items 1 - 24 of 223
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Router Table Plates

    Rockler Router Table Plates

    …Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill custom mounting holes.* Group A routers:

    8 Review(s)
    $59.99
  2. Durable 3/8'' Thick Polycarbonate

    Durable 3/8'' Thick Polycarbonate

    Eliminate wobble while cutting with your router by mounting this Durable 3/8" Thick Polycarbonate as a router base! The strong, support base keeps your router level and stable during the toughest of cuts. The polycarbonate may be cut, drilled, or routed to fit any application you need, but is strong…

    2 Review(s)
    $20.99
  3. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  4. Rockler Router Plate Template

    Rockler Router Plate Template

    …for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our 1/2" Pattern Cutting Bit #33536 (sold separately, but other 1/2" pattern bits also work.* For best results, mount the template…

    15 Review(s)
    $10.99
  5. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    …ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options. The most popular routers on the market have been divided into groups, with a plate assigned to each group. Just locate your router

    7 Review(s)
    $64.99
  6. Rockler Dust Bucket Dust Collection for Router Tables

    Rockler Dust Bucket Dust Collection for Router Tables

    The Router Table Dust Bucket will capture nearly all routing debris when you use both bucket and fence attachments with the Router Table Dual Port (20225) and your 4" dust collection system. 4" port can be mounted on the back or either side for convenient access. Enjoy maximum dust collection while…

    26 Review(s)
    $84.99 $63.74

    SAVE 25%

  7. Router Fundamentals Book

    Router Fundamentals Book

    …Rick Peters.* Softcover.* 192 pages. Chapters include Choosing a router; Router accessories; Handheld router accessories; Table-mounted router techniques; Shop-made router jigs and fixtures; Maintenance and troubleshooting; and Router projects.* Projects are desk clock, circular keepsake box, a set…

    $17.95
  8. ProLift Adapter 40-002 for select Porter-Cable, Bosch and DeWalt routers

    ProLift Adapter 40-002 for select Porter-Cable, Bosch and DeWalt routers

    Necessary accessory to mount the following routers in the Bench Dog® ProLift router lift (28827, sold separately):* Porter-Cable 690 Series* Porter-Cable 890 Series* Bosch 1617* Bosch 1618* DeWalt 610* DeWalt 616* DeWalt 618

    $32.99
  9. Bench Dog® Cast Iron Router Table, Pro Fence & Plate

    Bench Dog® Cast Iron Router Table, Pro Fence & Plate

    …Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill custom mounting holes.* Group A routers:

    5 Review(s)
    $599.99
  10. Rockler T-Track Table Top

    Rockler T-Track Table Top

    …and the Bench Cookie T-Track Risers (46311). You can also use it with toggle clamps mounted on our Toggle Clamp Mounting Plates (24872). The spacious top measures 28" x 40", larger than most comparable tables. Mount it on a shop-built base, or on our 24"W x 36"L ShopStand (48089, sold separately).…

    1 Review(s)
    $229.99 $199.99

    SAVE 13%

  11. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two…

    From: $15.99
  12. Bench Dog® Push-Loc

    Bench Dog® Push-Loc

    A push stick isn't doing much good if you can't find it! Push-Loc comes with an exclusive docking station that mounts to your tool so Push-Loc is always upright and ready for use. The docking station is also a handy pencil tray, and it even holsters two tape measures. Push-Loc's innovative handle is…

    7 Review(s)
    $14.69
  13. Retrofit Hardware for Mounting Bench Dog® Router Table Tops

    Retrofit Hardware for Mounting Bench Dog® Router Table Tops

    Necessary accessory to mount Bench Dog® ProMaxRT Cast Iron Router Table Top.

    $10.49
  14. Safety Switch with Mounting Bracket for Steel Router Table Cabinet

    Safety Switch with Mounting Bracket for Steel Router Table Cabinet

    The Safety Switch with Mounting Bracket installs quickly and easily because all holes match perfectly with the pre-tapped holes in the Router Cabinet (41427, sold separately).

    $39.99
  15. Router Table Shim

    Router Table Shim

    Necessary accessory for mounting a Phenolic Router Table Top to the Rockler Steel Router Table Cabinet (41427, sold separately).

    $15.00
  16. Rockler Router Fluting Jig

    Rockler Router Fluting Jig

    …boards up to 8" wide. The router mounts to a pre-drilled acrylic centerpiece, which slides laterally to rout out flute after flute. Scales on the centerpiece and writable/erasable indexing surfaces make setup simple. Additional features:* Pre-drilled to fit most routers on the market* Easy to custom…

    32 Review(s)
    $69.99
  17. Porter-Cable 892 Router

    Porter-Cable 892 Router

    …access for handle grip, palm grip and router table mounted positions while preventing accidental start-up when the spindle lock is engaged. * Large opening, see-through sub-base with quick-change release for tool-less changeover between router bases and router tables * Multi-function carrying case…

    18 Review(s)
    $199.99
  18. Rockler Router Table Fence

    Rockler Router Table Fence

    Our Rockler Router Table Fence boasts the same features and tool-free adjustability as the original, PLUS an included dust port, bright, high-visibility bit guard and fence faces, and a gleaming black aluminum backbone. At 32" long, this extruded backer provides plenty of reference surface for…

    $84.99
  19. Router Joinery DVD

    Router Joinery DVD

    Routers can be used to cut a wide variety of joints quickly and accurately. In this video, professional woodworker Gary Rogowski demonstrates router joinery techniques that can be mastered by any woodworker.* You'll see firsthand how to do the work, the tools, the techniques, and the subtle rhythm…

    1 Review(s)
    $20.99
  20. Bosch Colt™ Palm Router Subbases

    Bosch Colt™ Palm Router Subbases

    …guides.* Smooth, long-wearing phenolic construction.* For use with Bosch palm routers PR20EVS and PR10E.* 1-1/4" opening diameter.* 5-1/4" outer diameter.* Includes mounting screws.Product 22142: Palm Router Subbase for Bosch Template Guides* Accepts the Bosch RA-Series Template Guide Adapters

    4 Review(s)
    From: $14.49
  21. Rockler Steel Router Table Cabinet

    Rockler Steel Router Table Cabinet

    router workstation made by Rockler woodworkers!* Solid steel construction* Internal dust bucket* Enough storage to hold all your router accessoriesRouter Table Top, Drawer Box Kit, and Safety Switch Kit are available separately. The Router Table Shim (42817 - sold separately) is needed for mounting

    7 Review(s)
    $459.99
  22. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    …x 3/8") has been designed to mount to any router without the usual swiss-cheese' type surface found on most router table insert plates. Utilizing your router's base plate and the easy to use template (included), mounting the insert plate to almost any router leaves you with a perfect custom fit…

    $179.00
  23. Freud® Beadboard Router Bit System

    Freud® Beadboard Router Bit System

    …and much more.* Mills traditional beadboard in a variety of thicknesses and widths.* 32329 includes two slot cutters to rout either 1/4" or 1/16" tongue & groove joints.* Use with any hardwood or softwood to match your project or décor.* Use only with a table mounted router and fence.

    From: $18.97
  24. Rockler Trim Router Circle Jig

    Rockler Trim Router Circle Jig

    Router Circle Jig allows you to use the new crop of compact, plunge-style trim routers to cut circles from 6" to 36" in diameter! Compact and lightweight, it's the ideal jig to use in small shops or on the jobsite. It sets up in minutes, and is predrilled to mount to popular trim routers

    $36.99
  • Items 1 - 24 of 223
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X