Router Pattern

  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
  1. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide…

    3 Review(s)
    $112.99
  2. Butterfly Key Inlay Template Set

    Butterfly Key Inlay Template Set

    …joint reinforcement! Requires the Rockler Inlay System (#25229 Sold Separately). This four-piece set contains 4" x 6" clear acrylic inserts with patterns for seven different sized inlays. Each insert features horizontally and vertically centered guidelines for simple and accurate positioning.…

    1 Review(s)
    $19.99
  3. Mortise Centering Router Base

    Mortise Centering Router Base

    …Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises.* Predrilled hole pattern fits: Porter Cable 690/890 series, Makita 1100-1101 series, Bosch 1617-1618 (fixed base only) and Dewalt DW616/DW618.* 6-1/2" diameter.* 11/16"L…

    10 Review(s)
    $19.99 $14.99

    SAVE 25%

  4. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers,…

    From: $34.47
  5. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much…

    7 Review(s)
    $79.99
  6. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  7. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  8. Rockler Router Plate Template

    Rockler Router Plate Template

    …your router table plate with this easy-to-use template. With an 8-1/4" x 11-3/4" design, it is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our 1/2" Pattern

    15 Review(s)
    $10.99
  9. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  10. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    …you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting. Carbide-tipped. Shank is 1/4" in diameter, bearing is 1/2" diameter and carbide height is 1/4".

    5 Review(s)
    $18.99
  11. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    …in scale makes it easy to gauge your offset for the second shoulder of your dado.* Dado Jig is made of sturdy, low-friction ABS.* Jig is pre-drilled to fit most routers with a standard 3-hole pattern, and can be easily drilled to fit any other router.* Includes detailed instructions.* Made in USA.

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  12. Maple Black Mahogany Block Inlay Banding, 1/4'' W

    Maple Black Mahogany Block Inlay Banding, 1/4'' W

    Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note:…

    $14.99
  13. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/2" shanks.

    From: $17.99
  14. CNC Shark® Touch Probe

    CNC Shark® Touch Probe

    The CNC Shark® Touch Probe attaches to the router in any CNC Shark® Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Simply program the Shark to operate at the same detail level as the Touch Probe scan…

    3 Review(s)
    $299.99
  15. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    21 Review(s)
    $2,899.99
  16. Rockler Router Guide Bushing Kit

    Rockler Router Guide Bushing Kit

    …Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six…

    45 Review(s)
    $41.99
  17. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    The templates interlock to form a stable pattern as you rout signs with appropriate carbide router bits and bushings (3/8" for 2-1/4" kits & 5/8" for the 4" Kits ). Secure patterns to your work surface with masking tape, Self-Adhesive Discs, or double stick tape (sold separately). Each Letters…

    51 Review(s)
    From: $22.99
  18. Classic Ice Box Plan

    Classic Ice Box Plan

    …groove joinery and doweling. Cabinet features basic frame and panel and face frame design. Decorative elements include cove molding and router details. A router and other common workshop tools are needed for construction. Dimensions for finished Ice Box are: 47-1/4" High x 44" Wide x 22" Deep.…

    11 Review(s)
    $10.49
  19. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    …substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates, veneers,…

    3 Review(s)
    From: $32.97
  20. Edge Routing Dust Port

    Edge Routing Dust Port

    …installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2" O.D. dust port.* Installs easily onto any router baseplate that accepts a standard Porter Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled…

    19 Review(s)
    $15.99 $11.99

    SAVE 25%

  21. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  22. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $51.47
  23. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  24. Rockler Train Track Router Bits

    Rockler Train Track Router Bits

    These carbide-tipped bits let you create classic wooden toy train tracks, similar to the expensive store-bought track. Cut enough track and the bits will pay for themselves, but the funnest part is getting creative and inventing track elements that nobody has ever seen before! Interesting…

    6 Review(s)
    From: $19.99
  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X