Router Pattern Bit

  • Items 1 - 24 of 75
  • Page:
    1. 1
    2. 2
    3. 3
  1. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    …this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting.…

    5 Review(s)
    $18.99
  2. Rockler Pattern Flush Trim Bits for Plunge Routers

    Rockler Pattern Flush Trim Bits for Plunge Routers

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  3. Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  4. Freud Top and Bottom Bearing Flush Trim Router Bits

    Freud Top and Bottom Bearing Flush Trim Router Bits

    …direction that best suits your work piece. Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to…

    From: $34.47
  5. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99 $15.39

    SAVE 30%

  6. Rockler Router Plate Template

    Rockler Router Plate Template

    …is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our 1/2" Pattern Cutting Bit #33536 (sold separately, but other 1/2" pattern bits also work.* For best results,…

    15 Review(s)
    $10.99
  7. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/2" shanks.

    $27.99 From: $18.99

    SAVE 32%

  8. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/4" shanks.

    From: $15.99
  9. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    Precision ground to close tolerances, this bit is ideal for pattern or template cutting. Since the bearing is top-mounted, the template is also top-mounted, and you get a clear view of the cut line. Of course, it also doubles as a 3/4" dado bit, and can be used to trim veneers and other laminates…

    21 Review(s)
    $26.99
  10. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a…

    From: $20.47
  11. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  12. Edge Routing Dust Port

    Edge Routing Dust Port

    …easily onto any router baseplate that accepts a standard Porter Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning replacement nuts are easily available.* Works with bits up to 1" in…

    18 Review(s)
    $15.99
  13. Freud # 42-114 Bearing Flush Trim Bits, 1/2" Dia. x 1-1/2" H x 1/2" Sh.

    Freud # 42-114 Bearing Flush Trim Bits, 1/2" Dia. x 1-1/2" H x 1/2" Sh.

    …tops and doing pattern work, these are the bits to rely on for a smooth, burn-free cut. Two flutes offer fast chip ejection, while the carbide ensures a long life of precise flush cuts.* Cuts all composition materials, plywoods, hardwoods,and softwoods.* Use on portable or table-mounted routers.

    $20.97
  14. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    The templates interlock to form a stable pattern as you rout signs with appropriate carbide router bits and bushings (3/8" for 2-1/4" kits & 5/8" for the 4" Kits ). Secure patterns to your work surface with masking tape, Self-Adhesive Discs, or double stick tape (sold separately). Each Letters…

    50 Review(s)
    From: $22.99
  15. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  16. Black Maple Zebrawood Inlay Banding, 3/16'' W

    Black Maple Zebrawood Inlay Banding, 3/16'' W

    Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are…

    $15.99
  17. Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    …laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or table-mounted routers.

    $16.97
  18. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …Signmaker's Carbide Router Bit (36676, sold separately) and a router with a perforated base.* 3-3/8" Kit (#43820) requires 5/8" Signmaker's Carbide Router Bit (32443, sold separately) and a router with a perforated base.* The uniquely designed sign making router bits (sold separately) are…

    21 Review(s)
    From: $49.99
  19. Freud Downshear Helix Flush Trim Bits

    Freud Downshear Helix Flush Trim Bits

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  20. Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $4.99

    SAVE 50%

  21. Rockler Classical ''Miniature'' Roman Ogee Plunge Bit

    Rockler Classical ''Miniature'' Roman Ogee Plunge Bit

    Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4" diameter with a sturdy, vibration-free 1/2" shank.

    1 Review(s)
    $26.99
  22. CMT Bowl & Tray System Kit

    CMT Bowl & Tray System Kit

    …templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide…

    3 Review(s)
    $112.99
  23. CNC Shark Pro Plus Routing System - Limited Quantities

    CNC Shark Pro Plus Routing System - Limited Quantities

    …compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the…

    15 Review(s)
    $3799.99 $3499.99
  24. 14° Dovetail Pattern Router Bit

    14° Dovetail Pattern Router Bit

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  • Items 1 - 24 of 75
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X