Router Plate

  • Items 1 - 24 of 74
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Router Table Plates

    Rockler Router Table Plates

    …with the plates. 1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16''…

    8 Review(s)
    $59.99
  2. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    plates all measure 8-1/4" x 11-3/4" - the exact size of the plate opening in Bench Dog's new ProTop and ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options. The most popular routers

    7 Review(s)
    $64.99
  3. Rockler Router Plate Template

    Rockler Router Plate Template

    Get a custom fit for your router table plate with this easy-to-use template. With an 8-1/4" x 11-3/4" design, it is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest…

    15 Review(s)
    $10.99
  4. Rockler Router Plate Insert With 1-1/2" Opening For Large Opening Plates

    Rockler Router Plate Insert With 1-1/2" Opening For Large Opening Plates

    …fit into a Large opening plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter Cable 7539* Milwaukee 5625-20* Triton TRA001* Triton MOF001Rockler Router Plate D* Bosch 1619-1619EV* Freud…

    $6.99
  5. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  6. Rockler Router Lift FX

    Rockler Router Lift FX

    …from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized routers. * The Router Lift FX Plus accepts the following routers: Porter-Cable…

    41 Review(s)
    $199.99
  7. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    …least two screws to be 1/2" long versus 5/8".* Group B routers: DeWalt DW621 and DW621K; Craftsman Standard; Freud FT 1700E and 1702VCEK* Group C routers: Porter-Cable 7518, 7519, 7538 and 7539; Milwaukee 5625-20; Triton TRA001 and MOF001* Group D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625

    1 Review(s)
    $99.99
  8. Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops)

    Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops)

    Router Plate Leveling and Locking Hardware Pack consist of 8 each 40mm confirmats for leveling your router plate and 2 each threaded inserts for securing your plate to the table.

    $6.49
  9. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp accessories, sold separately. Rigid, lightweight construction makes these clamps a joy to operate. Each clamp is 2-1/2" wide. Contractor Saw Plate and Contractor Router Plate, Stop Block and Squaring Attachment sold separately.

    89 Review(s)
    From: $41.99
  10. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    plate (9-1/4" x 11-3/4" x 3/8") has been designed to mount to any router without the usual swiss-cheese' type surface found on most router table insert plates. Utilizing your router's base plate and the easy to use template (included), mounting the insert plate to almost any router

    $179.00
  11. Router Xtreme Xtension™

    Router Xtreme Xtension™

    …extend router bit's reach. * No need to lock your spindle - single locking screw secures the bit.* Runs 1/8" through 3-1/2" diameter cutters.* Additional 1-1/4" length and 1" deep bore provide complete support of all 1/2" and 1/4" shank bits used with any thickness table or insert plate.* Works in…

    5 Review(s)
    $76.99
  12. Rockler Router Plate Insert With 2-1/2" Opening For Standard Plates

    Rockler Router Plate Insert With 2-1/2" Opening For Standard Plates

    The interchangeable insert for standard plates features a 2-1/2'' opening. The 4'' OD allows this insert to fit into a standard plate with a 3-1/4'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate A* Makita 1100* Milwaukee 5615-5624* DeWalt 616-618* Bosch 1617- 161*…

    $8.49
  13. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …Group B Routers: DeWalt DW621 and DW621K; Crafstman Standard; Freud FT1700E and 1702VCEK Group C Routers: Porter-Cable 7518, 7519, 7538 and 7539; Milwaukee 5625-20; Triton TRA001 and MOF001 Group D Routers: Bosch 1619-1619EVS; Freud FT2000; DeWalt 625 #23600 Router Table and Fence without Plate For…

    14 Review(s)
    $349.99
  14. Rockler Bench Dog® ProMAX Cast Router Table without Plate (40-102)

    Rockler Bench Dog® ProMAX Cast Router Table without Plate (40-102)

    …you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds. Accepts 8-1/4" x 11-3/4" router table plates.

    $329.99
  15. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router - requires only one setup to cut both pieces.* Ideal for cabinet, chair and table construction. Technical Details:* Fully adjustable for compound angle joints.* With reversible template to…

    $383.99
  16. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …even holes that are actually smaller than the base of the router! CRB can rout circles from 3/4" to 8-3/4" radius, using a 1/4" straight bit.* Offset Base Plate: Increases overall router stability. * CRB also moves the pivot hand that the router toward the center of the panel, reducing the chance of…

    7 Review(s)
    $79.99
  17. ''C'' Series All In One Contractor Router Plate

    ''C'' Series All In One Contractor Router Plate

    Plate features an attachment that fits the standard T-Tracks on Contractor Clamps (sold separately) to firmly guide your router in a straight line along the clamp. The 6" diameter plate attaches easily to many popular routers for consistent and uniform performance.This Router plate is predrilled to…

    1 Review(s)
    $38.39
  18. Incra Master Lift II Designed for Rockler Tables

    Incra Master Lift II Designed for Rockler Tables

    …series.* Compatible Router Tables: 8-1/4" x 11-3/4" x 3/8" plate size is compatible with all full size Rockler and Benchdog Router Tables. Note: Does not fit standard Incra Router Tables, Benchdog ProMAX Cast Router Table Extension for Table Saws or ProMaxRT Cast Iron Router Table Tops. Note: The…

    7 Review(s)
    $329.99
  19. Master Plate with Super Bar

    Master Plate with Super Bar

    …with this combination Master Plate and Super Bar. Together, they help you tune-up, calibrate, and align your table saw to within 1/1000 of an inch! What's more, it promotes safer operation by helping to eliminate kickbacks, sticking, and binding. The master plate is made of solid 1/4" thick,…

    10 Review(s)
    From: $49.99
  20. Rockler Router Plate Insert Without Opening

    Rockler Router Plate Insert Without Opening

    …Rockler Router Table Plates: Rockler Router Plate A* Makita 1100* Milwaukee 5615-5624* DeWalt 616-618* Bosch 1617- 161* Rigid 2930 Combo Kit* Hitachi M12VC (Fixed & Kit)* Bosch MRC23EVSK* Porter Cable 690* Porter Cable 890* Porter Cable 7529* Porter Cable 97529* Porter Cable 8529Rockler Router Plate

    $8.49
  21. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    …against the fence. Choose the Size Below that Best Fits Your Rockler Router Table Plate:* Standard Size: 3-1/4" Bit Opening. Fits Plate A and B.* Large Size: 3-11/16" Bit Opening. Fits Plate C and D, large opening plates, Router Lift FX, and Bench Dog ProLift. Technical Details:* Table-mounted…

    1 Review(s)
    $49.99
  22. Rockler Dish Carving Router Bit - 1" Dia x 1/2" H x 1/4" Shank

    Rockler Dish Carving Router Bit - 1" Dia x 1/2" H x 1/4" Shank

    …boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded corner is easy to clean,…

    3 Review(s)
    $29.99
  23. Rockler Bench Dog® 40-150 ProLift Router Adjustment System

    Rockler Bench Dog® 40-150 ProLift Router Adjustment System

    router running cool, while the direct-drive mechanism eliminates the complication and slop of belts, chains and gears. Compatible with ALL Bench Dog® Router Tables (and all NEW Rockler Router Tables). If you're looking for a powerful lift that moves faster and lasts longer, this is it!* Plate

    17 Review(s)
    $349.99
  24. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    …to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x 3/4" and 1/2" x 1".…

    $29.99
  • Items 1 - 24 of 74
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X