Router Table Accessories

  • Items 1 - 24 of 316
  • Page:
    1. 1
    2. 2
    3. 3
  1. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    This 6-Piece router table accessory kit includes three plate inserts with various bit openings for minimal clearance capabilities. Also included with each kit is three featherboards for better consistency and to prevent kickback ensuring safety during routing. Two of the featherboards mount to the…

    1 Review(s)
    $49.99
  2. Micro Adjuster for Router Table Fence

    Micro Adjuster for Router Table Fence

    Micro adjust your router fence for superior routing accuracy. Onboard clamp attaches to the router table and houses the finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either…

    7 Review(s)
    $22.99
  3. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …on table saws, router tables, workbenches and more! These solid aluminum bars have nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables,

    12 Review(s)
    From: $19.99
  4. 17-Piece Universal T-Track Kit

    17-Piece Universal T-Track Kit

    Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: * One 4' length of Universal T-Track* Two 3-1/2" x 5/16" T-bolts* Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts*…

    45 Review(s)
    $31.99
  5. Router Raizer

    Router Raizer

    …depth-of-cut adjustments with your plunge router. The Router Raizer lets you work from both the topside and underside of your router table. Router plate shown not included. With the Router Raizer no special insert is required (or included) - use any router plate from 3/16" to 1/2" thick will do the…

    15 Review(s)
    $104.99
  6. Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    …plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter Cable 7539* Milwaukee 5625-20* Triton TRA001* Triton MOF001Rockler Router Plate D* Bosch 1619-1619EV* Freud FT2000* DeWalt 625

    $6.99
  7. Router Lift FX

    Router Lift FX

    …from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized routers. * The Router Lift FX Plus accepts the following routers: Porter-Cable…

    41 Review(s)
    $206.99
  8. Rockler Retrofit Double Featherboard Kit

    Rockler Retrofit Double Featherboard Kit

    …existing Rockler Table Featherboard (#53677). Don't have a Rockler Featherboard yet? Purchase the retrofit kit with our Rockler Table Featherboard (available below) to make a double featherboard for applying pressure at the table level and at the top of the router table fence 3" above the table.

    3 Review(s)
    $9.99
  9. Dust Bucket Dust Collection for Router Tables

    Dust Bucket Dust Collection for Router Tables

    …Bucket is easy to assemble and is keyhole slotted to attach to most router table tops. Galvanized steel components. Router Table Dust Bucket measures 13" W x 13" H x 10" deep. Fits most routers, including large plunge routers. Use only with a 4" dust collection system. The Dust Bucket will not work…

    25 Review(s)
    $83.99 $69.99

    SAVE 17%

  10. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  11. Rockler Router Table Fence

    Rockler Router Table Fence

    Our Rockler Router Table Fence boasts the same features and tool-free adjustability as the original, PLUS an included dust port, bright, high-visibility bit guard and fence faces, and a gleaming black aluminum backbone. At 32" long, this extruded backer provides plenty of reference surface for…

    $84.99
  12. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …and routers and as a fence for your table saw or drill press. A very low 17/32" profile body and flat top allow many applications without obstructing tools. Easy-to-read full color measuring scales enable outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp accessories,

    89 Review(s)
    From: $41.99
  13. PG2000 Router Bit Bearing Lube Pen

    PG2000 Router Bit Bearing Lube Pen

    Apply lubrication to router bit bearings, table saw trunnions, drill press gears and more with pin-point accuracy. Provides long lasting, smooth operation of any metal-to-metal mechanism. Lubricant also penetrates and cleans moving parts.

    2 Review(s)
    $3.99
  14. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    …ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options. The most popular routers on the market have been divided into groups, with a plate assigned to each group. Just locate your router

    7 Review(s)
    $64.99
  15. Router Table Jointing Shims - 6 Pack

    Router Table Jointing Shims - 6 Pack

    Allows outfeed fence to be shimmed in .010" increments when using the router table to edge-joint boards.* Shims can be combined to shave .070" off an edge. * Designed for use with the Rockler router table fence.* Shims measure 2" high x 14" long.* Includes six plastic shims in these thicknesses:…

    15 Review(s)
    $6.99
  16. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  17. Bench Dog® Router Table Pro Fence 32''

    Bench Dog® Router Table Pro Fence 32''

    …the front and back of the aluminum spine. These tracks, which are perfect for attaching featherboards, stops, hold-downs, and more, accept any accessory with 1/4" t-bolts, 5/16" hex-bolts, and 1/4" hex bolts. On top of two adjustable MDF faces, the fence also includes an integrated bit guard and…

    1 Review(s)
    $159.99
  18. Depth Gauge

    Depth Gauge

    …depth gauge helps set the height of router bits and saw blades with greater accuracy.* Self-standing for setting cutter depth on router tables and low profile for backfence adjustment. * Horizontal and vertical measuring.* For hand routers, router tables and table saws.* With 2-3/8" wide aperture,…

    $16.49
  19. Fence Featherboard

    Fence Featherboard

    …Fits all Rockler T-slot fences and can be used with material up to 1-1/8" thick. Technical Details* Fits all Rockler T-Slot Fences* Ideal for router table and drill press operations* Includes large threaded star knobs for secure lockdown* Knobs' metal threads and T-slot bolts are 5/16" x 18 TPI

    9 Review(s)
    $16.99
  20. Board Buddies ® Anti-Kickback Hold Down

    Board Buddies ® Anti-Kickback Hold Down

    Maintain even pressure against the table and fence for safe, clean cutting on table saws and router tables. Two per Package. Technical Details:* Yellow wheels turn clockwise to prevent kickback on table saws and router tables.* Mounts to fences 3" to 3-1/2" high x 1" or wider.* Sold in pairs.*…

    2 Review(s)
    $80.99
  21. Bench Dog® ProRiser Profence Height Extender

    Bench Dog® ProRiser Profence Height Extender

    …to slide through un-obstructed. Includes all necessary hardware; you just add the fence face. * Maximum support for routing boards on edge and for raising panels vertically.* Holds material perfectly square to the table - ideal for precise joinery. * Works with ANY Bench Dog® Tools router table.

    1 Review(s)
    $26.29
  22. Safety Power Tool Switch

    Safety Power Tool Switch

    …when you're in a tight spot. Locate it near your hip or knee and you'll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool. * Includes 7' grounded cord to outlet and 2' female cord to power tool for quick plug-in…

    140 Review(s)
    $34.99
  23. Dust Bucket Dust Collection Kit for Router Tables

    Dust Bucket Dust Collection Kit for Router Tables

    Includes everything you need to capture dust from two key areas on your routing table: * Router Table Dust Bucket (32321)* Router Table Dual Dust Port (20225)* 2-1/2'' x 36'' clear Dust Hose (34203) Features: * Easy-access door with magnetic catch for quick height adjustments * Adjustable vent…

    1 Review(s)
    $110.47
  24. Freud Round-Over Table Edge & Handrail Bits

    Freud Round-Over Table Edge & Handrail Bits

    Apply an attractive edge to table tops, plaques and handrails with this versatile router bit from Freud. If used as a table edge bit, it routs a smooth, elongated radius. Set it deeper to rout a small shoulder, or shallower for a basic roundover. If used as a handrail bit, rout the handrail on both…

    1 Review(s)
    $102.97
  • Items 1 - 24 of 316
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X