Router Template

  • Items 1 - 24 of 117
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …heights and include 99 template pieces (letters, numbers, symbols, and kerning spacers). Included brass guide bushing is a vast improvement over the plastic bushing that was included with previous Rockler Sign Making Templates. Recommended for use with plunge router. Continuous, Unbroken Letters…

    24 Review(s)
    From: $49.99
  2. Rockler Circle/Grommet Templates

    Rockler Circle/Grommet Templates

    …rummaging through a stack of templates for the right size, this package combines the most common grommet sizes into two templates. Each size is clearly labeled for quick identification. Transparent acrylic with fine cross-hairs on each hole makes it easy to align the template with your pencil marks.…

    3 Review(s)
    $37.99
  3. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    …@ and &. Requires the use of a plunge router that accepts standard 1-3/16" template guides. The Interlock Signmaker's Kits require either a 3/8'' (33967) or 5/8'' (30933) guide bushing, as well as a 3/8" (36676) or 5/8" (32443) signmaking router bit, all sold separately. Letters Kits include:…

    51 Review(s)
    From: $22.99
  4. Rockler Router Plate Template

    Rockler Router Plate Template

    …custom fit for your router table plate with this easy-to-use template. With an 8-1/4" x 11-3/4" design, it is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest using our…

    15 Review(s)
    $10.99
  5. Inlay Bushing and Bit with Removable Collar

    Inlay Bushing and Bit with Removable Collar

    You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases. Looking for a simple system to make inlaying faster and easier than ever? Check out…

    9 Review(s)
    $37.99
  6. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  7. Butterfly Key Inlay Template Set

    Butterfly Key Inlay Template Set

    This time-honored inlay design (also known as Bow-Tie or Dutchman) works great for everything from decoration to joint reinforcement! Requires the Rockler Inlay System (#25229 Sold Separately). This four-piece set contains 4" x 6" clear acrylic inserts with patterns for seven different sized inlays.…

    1 Review(s)
    $19.99
  8. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  9. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …routing template is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided router

    $37.99
  10. Rockler Circle Cutting Jig

    Rockler Circle Cutting Jig

    …The Rockler Circle Cutting Jig sets up in minutes and mounts quickly to many popular routers made by Porter Cable, Makita, Hitachi, DeWalt, and Bosch. Or, easily drill your own holes to custom fit any router. Includes two center pivot pins which are used as a pivot point to rout perfectly arced…

    6 Review(s)
    $39.99 $29.99

    SAVE 25%

  11. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …deep cuts.* Template material is 1/2" MDF (all templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl…

    3 Review(s)
    $112.99
  12. Rockler Miniature Dovetail Template & Bit Kit

    Rockler Miniature Dovetail Template & Bit Kit

    …ranging from 1/4" to just 1/8" thick. The set includes a template, two miniature 1/8" shank router bits, a reducer to adapt your router, and a template guide. Attaches quickly and easily to the Rockler Dovetail Jig (22818). No other template allows for dovetail spacing this tight. It works with…

    5 Review(s)
    $66.99
  13. Rockler Inlay System

    Rockler Inlay System

    …acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom-cut…

    4 Review(s)
    $54.99
  14. Arch Door Templates

    Arch Door Templates

    Arch Door Templates Template set includes 10 rail templates and 10 corresponding templates for matching center panel. Includes instructional DVD on how to make single panel rail and stile doors. See Also Cathedral Door Templates

    $59.99
  15. Leigh Square Tenon Guides

    Leigh Square Tenon Guides

    …5/16", 3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown. Technical Details:* Includes 1/4", 5/16", 3/8" and 1/2" square tenon sizes.* Routed with a 1/2"…

    $72.49
  16. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $2.99

    SAVE 70%

  17. Template Guide Lock Nut

    Template Guide Lock Nut

    Use to secure Router Template Guide Bushings 43646, 43877, 60531, 60549, 63065, 63073 and 60540 (sold separately) to any router base with a 1-1/4" diameter center hole.

    $4.99
  18. Rockler Ellipse/Circle Router Jig

    Rockler Ellipse/Circle Router Jig

    Router Jig lets you cut circles and ellipse shapes over a wide range of dimensions and proportions. With your router and this handy, easy-to-use jig, you'll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Compare to other ellipse/circle router jigs…

    44 Review(s)
    $89.99
  19. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    When template work is in the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see…

    2 Review(s)
    From: $7.79
  20. Rockler Picture-Hanging Keyhole Template

    Rockler Picture-Hanging Keyhole Template

    …Separately), (specially designed for 1/4" template stock) and a 3/8" Hanging Slot Router Bit (#92024 - Sold Separately).* Use double-faced tape (50492) to secure template to workpiece.* Long slot measures 6-1/8".* Short slots measure 1-7/8".* Template measures 3" x 9".* Narrow venting slots allow…

    $11.59
  21. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    Realize the full potential of your router in only seconds with the easy-to-install CRB7 Multi-Function Router Base. The CRB7 arms your router with the ability to cut fully microadjustable dadoes, mortises, circles, and indexed grooves for faux paneling and shelving systems. In addition to that, the…

    7 Review(s)
    $79.99
  22. Rockler Router Guide Bushing Kit

    Rockler Router Guide Bushing Kit

    …11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate (sold…

    45 Review(s)
    $41.99
  23. Rockler Keyhole Slot Router Bits - 1/4" Shank

    Rockler Keyhole Slot Router Bits - 1/4" Shank

    …with a centered slot. * Rout two or more horizontal slots for larger hangings.* For added convenience, use with our Picture Hanging Keyhole Template. We recommend using the 3/8" Hanging Slot Router Bit (92024) and 5/8" Short Shank Guide Bushing and Nut (38756) with the template (Sold Separately).

    7 Review(s)
    From: $14.99
  24. Bosch RA-1100 Template Guide Adapter

    Bosch RA-1100 Template Guide Adapter

    #37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the round sub base and the plunge base for Colt palm routers. Allows you to use Porter-Cable template guides in the following Bosch Routers: 1613, 1613AEVS, 1613EVS, 1614, 1614EVS,…

    $15.99
  • Items 1 - 24 of 117
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X