Router Template Guide

  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …heights and include 99 template pieces (letters, numbers, symbols, and kerning spacers). Included brass guide bushing is a vast improvement over the plastic bushing that was included with previous Rockler Sign Making Templates. Recommended for use with plunge router. Continuous, Unbroken Letters…

    24 Review(s)
    From: $49.99
  2. Router Bushing Set

    Router Bushing Set

    Make your router even more useful with this Router Bushing Set! Turns your router into a precise cutting tool for duplication work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general…

    2 Review(s)
    $43.99
  3. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    When template work is in the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see…

    2 Review(s)
    From: $7.79
  4. Rockler Router Guide Bushing Kit

    Rockler Router Guide Bushing Kit

    …11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate (sold…

    45 Review(s)
    $41.99
  5. Rockler Circle/Grommet Templates

    Rockler Circle/Grommet Templates

    …sizes into two templates. Each size is clearly labeled for quick identification. Transparent acrylic with fine cross-hairs on each hole makes it easy to align the template with your pencil marks. Includes 13 circle sizes and two oval sizes. Use with the 5/8" Short-Shank Guide Bushing, which is…

    3 Review(s)
    $37.99
  6. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    …@ and &. Requires the use of a plunge router that accepts standard 1-3/16" template guides. The Interlock Signmaker's Kits require either a 3/8'' (33967) or 5/8'' (30933) guide bushing, as well as a 3/8" (36676) or 5/8" (32443) signmaking router bit, all sold separately. Letters Kits include:…

    51 Review(s)
    From: $22.99
  7. Router Edge Guide

    Router Edge Guide

    Save more than 50% compared to other edge guides! Perfect for simple flutes, dados rabbets, and more. The Plexiglas tool is easy to set and adjusts from 0 to 7 inches. The 3/4 inch x 5/8 inch fence can be used on a table surface. Technical Details:* Adjusts from 0 to 7"* 3/4 inch x 5/8 inch fence*…

    1 Review(s)
    $37.99
  8. Bosch RA-1100 Template Guide Adapter

    Bosch RA-1100 Template Guide Adapter

    #37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the round sub base and the plunge base for Colt palm routers. Allows you to use Porter-Cable template guides in the following Bosch Routers: 1613, 1613AEVS, 1613EVS, 1614, 1614EVS,…

    $15.99
  9. Cathedral Door Templates

    Cathedral Door Templates

    Cathedral Door Templates Template set includes 10 rail templates and 10 corresponding templates for matching center panel. Cathedral Door Template (left)and Arch Door Template (right). Includes instructional DVD on how to make single panel rail and stile doors. See Also Arched Door Templates

    $59.99
  10. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  11. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  12. Rockler Complete Dovetail Jig

    Rockler Complete Dovetail Jig

    …gauge on template for setting dovetail bit height for half-blind joints. Complete Dovetail Jig Includes: * Two durable phenolic templates* Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)* 1/2" to 8mm collet adapter* 7/16" guide bushing…

    131 Review(s)
    $164.99
  13. Signmaking Brass Bushing - 5/8" ID, 3/4" OD

    Signmaking Brass Bushing - 5/8" ID, 3/4" OD

    The replacement signmaking brass bushing is designed to be used with the Rockler Sign Making System. The Signmaking Brass Bushing has an inside diameter of 5/8" and an outside diameter of 3/4".

    $7.29
  14. Rockler Inlay System

    Rockler Inlay System

    …acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom-cut…

    4 Review(s)
    $54.99
  15. Rockler Vertical Panel Router Bit Set With Wooden Case

    Rockler Vertical Panel Router Bit Set With Wooden Case

    …rail cutters are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks—no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. All bits have sturdy 1/2" shanks for…

    1 Review(s)
    $149.99
  16. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …the Bosch RA-Series Template Guides. #37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the #22142 (PR009) round sub base. Allows you to use Porter-Cable template guides in the following Bosch Routers: 1613, 1613AEVS, 1613EVS,…

    23 Review(s)
    $129.99
  17. Arch Door Templates

    Arch Door Templates

    Arch Door Templates Template set includes 10 rail templates and 10 corresponding templates for matching center panel. Includes instructional DVD on how to make single panel rail and stile doors. See Also Cathedral Door Templates

    $59.99
  18. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …routing template is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the included bearing-guided router

    $37.99
  19. Rockler Signmaking Brass Bushing - 3/8" ID, 1/2" OD

    Rockler Signmaking Brass Bushing - 3/8" ID, 1/2" OD

    The replacement signmaking brass bushing is designed to be used with the Rockler Sign Making System.

    $7.49
  20. Inlay Bushing and Bit with Removable Collar

    Inlay Bushing and Bit with Removable Collar

    You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases. Looking for a simple system to make inlaying faster and easier than ever? Check out…

    9 Review(s)
    $37.99
  21. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    0 Review(s)
    From: $22.47
  22. Circle Cutter for Festool PS300 and PSB300 Jigsaws (490118)

    Circle Cutter for Festool PS300 and PSB300 Jigsaws (490118)

    Attach the accessory Circle Cutter to your Festool jigsaw for precise circles ranging in diameter from 4-23/32'' to 28-11/32'' (120 to 720 mm). Steel circle cutter attaches to base plate of jigsaw with thumb screws and comes with a centering mandrel. For use with both the Festool PS 300 and PSB…

    $35.00
  23. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  24. Sign Carving With Your Router DVD

    Sign Carving With Your Router DVD

    Carve custom signs with just an ordinary plunge router! In this DVD, signmaker Jim Bartz gives in-depth instruction on how to design and carve custom wooden signs using a versatile freehand method that requires no lettering templates or guides. From initial design to the final details, Bartz gives…

    4 Review(s)
    $28.39
  • Items 1 - 24 of 86
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X