Router Template Guide Bushing

  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
  1. Rockler Router Guide Bushing Kit

    Rockler Router Guide Bushing Kit

    Guide Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers.

    45 Review(s)
    $41.99
  2. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    When template work is in the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see…

    2 Review(s)
    From: $7.79
  3. Rockler Guide Bushing Router Plate

    Rockler Guide Bushing Router Plate

    …priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center…

    8 Review(s)
    $11.49
  4. Router Bushing Set

    Router Bushing Set

    …your router even more useful with this Router Bushing Set! Turns your router into a precise cutting tool for duplication work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general bushings,

    2 Review(s)
    $43.99
  5. Rockler Inlay System

    Rockler Inlay System

    …acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom-cut…

    4 Review(s)
    $54.99
  6. Rockler Signmaking Brass Bushing - 3/8" ID, 1/2" OD

    Rockler Signmaking Brass Bushing - 3/8" ID, 1/2" OD

    The replacement signmaking brass bushing is designed to be used with the Rockler Sign Making System.

    $7.49
  7. Bosch Template Guide Adapter, RA-1126

    Bosch Template Guide Adapter, RA-1126

    …Series template guide bushings without tools-just slide the lever aside and drop the bushing into place for a firm connection. The adapter also accepts the Bosch RA-1100(37072, sold separately) so you can use your conventional threaded guide bushings as well. Compatible with Bosch 1617 routers and…

    $6.99
  8. Kreg Precision Router Table System

    Kreg Precision Router Table System

    …from sagging over time. The phenolic insert plate includes an easy drilling template for mounting your router, as well as dual reducing rings with leveling screws. The rings are compatible with standard PC-style guide bushings. All of this rests on the Kreg Universal Steel Stand, adjustable from 31"…

    1 Review(s)
    $499.00
  9. Inlay Bushing and Bit with Removable Collar

    Inlay Bushing and Bit with Removable Collar

    You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases. Looking for a simple system to make inlaying faster and easier than ever? Check out…

    9 Review(s)
    $37.99
  10. Signmaking Brass Bushing - 5/8" ID, 3/4" OD

    Signmaking Brass Bushing - 5/8" ID, 3/4" OD

    The replacement signmaking brass bushing is designed to be used with the Rockler Sign Making System. The Signmaking Brass Bushing has an inside diameter of 5/8" and an outside diameter of 3/4".

    $7.29
  11. Leigh D4R Pro 24" Dovetail Jig

    Leigh D4R Pro 24" Dovetail Jig

    …14° dovetail cutters and a 5/16" x 1" straight cutter (all 8mm shanks), a 1/2" to 8mm collet reducer, a 7/16" O.D. guide bushing*, a 160-page manual, and a 44-minute DVD. Router with a 1/2" collet required.* Handles boards up to 24" wide and 1-1/4" thick - all with infinite adjustment of pin,…

    10 Review(s)
    $579.00
  12. Rockler Circle/Grommet Templates

    Rockler Circle/Grommet Templates

    …into two templates. Each size is clearly labeled for quick identification. Transparent acrylic with fine cross-hairs on each hole makes it easy to align the template with your pencil marks. Includes 13 circle sizes and two oval sizes. Use with the 5/8" Short-Shank Guide Bushing, which is specially…

    3 Review(s)
    $37.99
  13. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Upward spiral is perfect for ejecting chips from mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide…

    1 Review(s)
    From: $51.47
  14. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    …your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.* Designed for Blum hinges.* Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    10 Review(s)
    $17.99
  15. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …heights and include 99 template pieces (letters, numbers, symbols, and kerning spacers). Included brass guide bushing is a vast improvement over the plastic bushing that was included with previous Rockler Sign Making Templates. Recommended for use with plunge router. Continuous, Unbroken Letters…

    24 Review(s)
    From: $49.99
  16. Short Shank Guide Bushing and Nut, 5/8"

    Short Shank Guide Bushing and Nut, 5/8"

    The Short Shank Guide Bushing and Nut mount to your router's base plate and are designed for use with 1/4 thick templates, such as the Rockler Picture Hanging Keyhole Template (#32884, sold separately).

    $10.99
  17. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    …Edgebanded MDF Top* Easy-Slide™ Micro-Dot Skin* Dual Steel Support-Struts* Heavy-Duty Construction Supports the Largest Routers and Lifts* Combination Miter/T-Slot* Phenolic Insert Platewith Dual Reducing Rings* Unique Bottom-Up Insert Plate Levelers* Porter-Cable Guide Bushing Compatibility

    $179.00
  18. Rockler Picture-Hanging Keyhole Template

    Rockler Picture-Hanging Keyhole Template

    …Short-Shank Guide Bushing (#38756 - Sold Separately), (specially designed for 1/4" template stock) and a 3/8" Hanging Slot Router Bit (#92024 - Sold Separately).* Use double-faced tape (50492) to secure template to workpiece.* Long slot measures 6-1/8".* Short slots measure 1-7/8".* Template

    $11.59
  19. Template Guide Lock Nut

    Template Guide Lock Nut

    Use to secure Router Template Guide Bushings 43646, 43877, 60531, 60549, 63065, 63073 and 60540 (sold separately) to any router base with a 1-1/4" diameter center hole.

    $4.99
  20. Router Edge Guide for Porter Cable 690 Router

    Router Edge Guide for Porter Cable 690 Router

    …Porter-Cable standard router edge guide provides controlled cuts for consistent results. It uses the straight edge of the work-piece to guide the router for edge cuts, as well as inside cuts.* Easy to set up and adjust with simple thumbscrew clamps.* Fits Porter-Cable routers, models 100, 150, 350,…

    1 Review(s)
    $22.99
  21. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …* A Versatile Router Table* Space-Saving Router Table * Rock-Solid Router TablePart Three - Router Jigs and Techniques * Handheld Routing* Essential Jigs for the Router Table * Five Smart Router Jigs * Versatile Mortising Jig * Templates Guide the Way* A Guide to Guide Bushings* Climb Cutting:…

    $21.95
  22. Replacement Inlay Router Bit

    Replacement Inlay Router Bit

    Replacement Router Bit for the Rockler Inlay System (25229, sold separately) and the Inlay Bushing and Bit (27593, sold separately).

    $19.99
  23. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    …@ and &. Requires the use of a plunge router that accepts standard 1-3/16" template guides. The Interlock Signmaker's Kits require either a 3/8'' (33967) or 5/8'' (30933) guide bushing, as well as a 3/8" (36676) or 5/8" (32443) signmaking router bit, all sold separately. Letters Kits include:…

    51 Review(s)
    From: $22.99
  24. Edge Routing Dust Port

    Edge Routing Dust Port

    …Porter Cable template guide bushing. 2-1/2" O.D. dust port.* Installs easily onto any router baseplate that accepts a standard Porter Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning…

    19 Review(s)
    $15.99 $11.99

    SAVE 25%

  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
Feedback X