Rubber Feet

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Non-Skid Rubber Bumpers

    Non-Skid Rubber Bumpers

    …cabinet doors. Available in 1/2" or 3/4" diameters. Technical Details:* Made from Polylastomer®, a rubber-like material.* Use screws to secure the rubber bumpers.* Also can be used as case feet for lightweight furniture that tends to slide.* Bumpers are approximately 1/4" high.* Screws included.

    From: $2.89
  2. Screw-On Case Feet

    Screw-On Case Feet

    These screw-on case feet are made of durable harder rubber. Technical Details:* 3/4" diameter.* 1/2" high.* Includes mounting screws.* 4 per pack.

    4 Review(s)
    $6.99
  3. Interlocking Anti-Fatigue Mats, While Supplies Last!

    Interlocking Anti-Fatigue Mats, While Supplies Last!

    …and a hard concrete floor* Includes: Six 22" x 22" mats for 20 sq. feet of coverage in every pack* Connect multiple packs for wider shop floor coverage* Customize the shape to fit where you stand the most* Special rubber construction resists dirt for easy cleaning* Non-slip coating and…

    11 Review(s)
    $29.99
  4. Rockler Rolling Utility Ladder - Ladder Hardware, Zinc

    Rockler Rolling Utility Ladder - Ladder Hardware, Zinc

    …minimal effort. * Rubber feet hold the ladder firmly in place once positioned. * To move the ladder, you simply lift it slightly and roll it along the rail to the location you want. The locking wheel assembly rides along the top rail, guiding the ladder as it's repositioned.* Rubber pads on the legs…

    From: $27.99
  5. Component Cooler Single Fan

    Component Cooler Single Fan

    …can also add extra coolers to this three-pack. If you maintain a few components in a small cabinet or enclosed entertainment center, use the Cabinet Cooler Fan System instead. For equipment racks maintained in closets, the Closet Cooler will do the trick.* Fan * 72" cord* 8 rubber feet* Instructions

    $67.99
  6. Lazy Susan, Extra-Large Aluminum Swivel

    Lazy Susan, Extra-Large Aluminum Swivel

    …large Lazy Susan holds up to 660 lbs.* Pre-drilled holes let you attach to any base* Use it to rotate large serving platters, planters, tabletops, even a Christmas tree* Aluminum swivel with ball-bearing construction for smooth, quiet rotations* Measures 23-5/8" dia. x 7/8" H (including rubber feet)

    3 Review(s)
    $183.99
  7. Jet® 1700CFM Air Filtration System w/Remote Control

    Jet® 1700CFM Air Filtration System w/Remote Control

    …shuts system off at the end of the time setting.* Fully-enclosed ball-bearing motor with overload protection for long, dependable service.* Rubber feet prevent marring of surface when placed on workbench.* Use in conjunction with a JET dust collector for maximum dust control. Available Filters…

    $659.99
  8. Powermatic® 25'' Dual Drum Sander 5HP

    Powermatic® 25'' Dual Drum Sander 5HP

    …that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.* 5HP motor for plenty of power * Independently adjustable rear drum for fine tuning * Hard durometer rubber coating on steel drums provides…

    1 Review(s)
    $4,284.99
  9. SuperLock Rubber Floor Mat, 6-Pack

    SuperLock Rubber Floor Mat, 6-Pack

    …tools and workbench. One pack of six tiles covers about 15.5 square feet. Technical Details:* 3/8" thick.* Tile size: 19-1/2" x 19-1/2".* Coverage: About 15.5 square feet.* Floor mat material: Recycled heavy-duty rubber.* Recommended for use over concrete, tile, or most any other hard…

    $59.99
  10. HTC 2000 Universal Mobile Base

    HTC 2000 Universal Mobile Base

    …design, heavy-duty 3" wheels and rubber leveling feet to "park" your machine.* Easily expands from 12" to 52"; adjusts in 1" increments.* Base increases machine height by just 9/16".* Industrial-grade foot levers raise and lower tool; full 7/8" clearance under leveling feet during movement.* Maximum…

    2 Review(s)
    $69.99
  11. HTC3000 Universal Mobile Base

    HTC3000 Universal Mobile Base

    …Technical Details:* Features stable 4-wheel design, heavy-duty 3" wheels and rubber leveling feet to "park" your machine.* Aircraft-grade aluminum foot levers raise and lower tool; full 7/8" clearance under leveling feet during movement.* Adjusts from 14" to 54" in 1" increments.* Maximum rectangle:…

    $113.99
  12. Jet® Benchtop Oscillating Spindle Sander

    Jet® Benchtop Oscillating Spindle Sander

    …falling into the motor, and help protect operator. * Built-in storage racks keep spindles and table inserts handy* Benchtop includes four non-skid rubber feet keep machine stable during use Standard Equipment* Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies* Two…

    5 Review(s)
    $489.99
  13. Tormek Bench Grinder Mounting Set

    Tormek Bench Grinder Mounting Set

    …build the mounting block to fit your grinder. Universal support with micro-adjust, mounting base, eight mounting screws, eight washers and four rubber feet included. Technical Details:* Allows you to use your bench grinder for shaping with the Tormek sharpening system* Allows you to use Tormek jigs…

    $66.00
  14. Rockler 8 Foot Rolling Utility Ladder Kit with 12 Feet of Track, Zinc

    Rockler 8 Foot Rolling Utility Ladder Kit with 12 Feet of Track, Zinc

    …roll it along the rail to the location you want. The locking wheel assembly rides along the top rail, guiding the ladder as it's repositioned.* Rubber pads on the legs of the ladder hold it firmly in place once positioned.* Roller bracket assemblies secure the ladder to the ladder track for safe,…

    $533.88 $399.99

    SAVE 25%

  15. Small Router Bit Case

    Small Router Bit Case

    …shanked router bits for easy carrying and convenient storage. Small router bit case is ideal for storing different categories of bits, including straight, roundover, raised panel door and specialty bits. With rubber feet on bottom for standing. Holds 20 1/4'' shank and 30 1/2''. Bits not included.

    4 Review(s)
    $36.99
  16. Edge Banding Machine

    Edge Banding Machine

    …and top-mounted heat control dial allow use of a wider variety of edge-banding materials.* Light, durable construction and adjustable, non-skid rubber feet. * Built-in cut-off knife has a palm-strike knob. * All fences and guides adjust using the same Allen wrench. * Laminate-covered table is 27" by…

    12 Review(s)
    $319.99
  17. DMT 6'' Diamond Whetstones

    DMT 6'' Diamond Whetstones

    …require flattening or messy oils. The large bench stone size is perfect for kitchen knives, chisels, plane blades and more. Includes non skid rubber feet and a durable plastic storage case. Can be bench mounted. Made in USA. * Perfect fit at home or in the shop offering a sharpening surface to…

    1 Review(s)
    $49.99
  18. Extreme Tool Boss Tool Bag

    Extreme Tool Boss Tool Bag

    …17"L x 15"H.* Weighs approximately 8 pounds.* Ballistic nylon material for durability.* Waterproof rubber bottom protects your tools from the elements.* Four non-marring rubber feet.* Zippered side compartments, each with 24 pockets for tools (48 pockets).* 64 total separate compartments.*…

    $99.99
  19. Jet 1000CFM Air Filtration System with 3 FREE Standard Outer Filters

    Jet 1000CFM Air Filtration System with 3 FREE Standard Outer Filters

    …shuts system off at the end of the time setting* Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service* Rubber Feet prevent marring of surface when placed on workbench* Features a handy remote control that can be used to adjust the three speeds, timer and…

    $442.56 $369.99

    SAVE 16%

  20. Interlocking Wood Grain Anti-Fatigue Mats - 24'' x 24''

    Interlocking Wood Grain Anti-Fatigue Mats - 24'' x 24''

    …* Covers 16 square feet of floor space—buy as many 4-packs as needed to fill your space.* 13/32'' thick (slightly thicker than 3/8'') to relieve foot and back pain.* Mats can be assembled and disassembled easily to fit any space, or for transport.* Special EVA foam rubber material resists dirt…

    2 Review(s)
    $29.99
  21. SOY-Gel ™ Paint and Urethane Remover, Quart

    SOY-Gel ™ Paint and Urethane Remover, Quart

    …Once applied, it starts to lift the coatings in minutes. Now available in a five-gallon size for up to 1,000 square feet of coverage.* One quart gives you up to 50 square feet of coverage - three times the coverage of most traditional strippers.* After the finish has lifted, use a Carbide Scraper…

    32 Review(s)
    $20.99 $17.99

    SAVE 14%

  22. SOY-Gel™ Paint and Urethane Remover, 5-Gallon

    SOY-Gel™ Paint and Urethane Remover, 5-Gallon

    …Once applied, it starts to lift the coatings in minutes. Now available in a five-gallon size for up to 1,000 square feet of coverage.* One quart gives you up to 50 square feet of coverage - three times the coverage of most traditional strippers.* After the finish has lifted, use a Carbide Scraper…

    29 Review(s)
    $274.99
  23. SOY-Gel™ Paint and Urethane Remover, Gallon

    SOY-Gel™ Paint and Urethane Remover, Gallon

    …natural alternative to harsh chemical strippers. Once applied, it starts to lift the coatings in minutes.* One gallon gives you up to 200 square feet of coverage.* After the finish has lifted, use a Carbide Scraper to remove the bulk of the softened finish.* For final cleanup after stripping, we…

    30 Review(s)
    $64.99
  24. Fein Turbo I Autostart VS Vac

    Fein Turbo I Autostart VS Vac

    …Powerful enough to run two 6-inch random orbit sanders, the Turbo I always maintains an absolute minimum noise level (60 D.B.A or less at 3-1/2 feet). And with autostart capability, it turns on simultaneously with your power tool, which plugs directly into the vacuum's panel-mounted outlet. When…

    1 Review(s)
    $330.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X