Sanding Block

  • Items 1 - 24 of 59
  • Page:
    1. 1
    2. 2
    3. 3
  1. SandDevil Sanding Tool

    SandDevil Sanding Tool

    The SandDevil sanding tool combines a large, firm sanding block with the ability to quickly swap out the standard 3" x 21" abrasive belt when you need a finer grit, or the sanding belt is worn. Simply flip open the lever, slide on a new belt, flip it closed, and away you go. This capability also…

    1 Review(s)
    $21.99
  2. Preppin' Weapon Sanding Block

    Preppin' Weapon Sanding Block

    …sandpaper or 2-3/4" wide adhesive-backed paper.* Stainless steel clips and hardware provide secure clamping.* Sanding face measures 7-3/4" long x 2-3/4" wide.* Floats in a bucket of water for self-rinsing during wet sanding operations.* ABS plastic body and structural foam sanding surface.* Yellow.

    9 Review(s)
    $22.59
  3. Sanding Pads

    Sanding Pads

    The way to smoother sanding is in the palm of your hand with these sanding pads. Changing sandpaper is easy: Unlike traditional block sanders, these pads accept standard 5" hook and loop sandpaper disks. Both the flat style and the round style (flexible for contour sanding) feature an ergonomic…

    3 Review(s)
    $22.49
  4. SandFlex Flexible Abrasive Blocks

    SandFlex Flexible Abrasive Blocks

    sanding sponge. SandFlex Abrasive Blocks are made of a unique rubber compound that is impregnated with abrasive throughout the entire block. As it wears, it constantly exposes a fresh abrasive surface, self-cleans and self-sharpens. Use it like an eraser-simply rub firmly. The sanding blocks can…

    1 Review(s)
    $7.99
  5. Double-Sided Sanding Sponges, 6-Pack

    Double-Sided Sanding Sponges, 6-Pack

    …turnings, moldings and other non-flat surfaces. They also work well on flat surfaces, especially between coats of finish, where a harder block would sand through the finish. Ideal for light to moderate sanding of wood, paint, metal, plastic and drywall. Each sponge measures 2-3/4"W x 4"L x 1" thick.

    8 Review(s)
    $5.49
  6. Pumice Stone, Rotten Stone and Felt Blocks-Application Blocks (Sold Separately)

    Pumice Stone, Rotten Stone and Felt Blocks-Application Blocks (Sold Separately)

    Pumice stone is ideal for finishing and refinishing wood surfaces by removing scratches, blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be…

    8 Review(s)
    From: $8.79
  7. Rubber Sanding Block

    Rubber Sanding Block

    5" long pliable rubber sanding block securely holds sandpaper during wet or dry sanding.* Takes 2-5/8" x 9" sandpaper.* When sanding, use a back and forth motion to avoid tearing of the paper.* Yields four strips from a standard size 9" x 11" piece of sandpaper.

    2 Review(s)
    $6.99
  8. Oneway Termite Hollowing Tool Package

    Oneway Termite Hollowing Tool Package

    …hollowing quickly, and with incredible precision. It's also great for finishing cuts on any flat or curved surface. It drastically reduces finish sanding, saving both time and money. Because it excels at end grain, pommels on spindles can be cut unbelievably clean. Package includes #1 (3/8") and #2…

    2 Review(s)
    $99.79
  9. Black Maple Block Inlay Banding, 1/8'' W

    Black Maple Block Inlay Banding, 1/8'' W

    …decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

    $12.49
  10. Bendix Small Star Blocks

    Bendix Small Star Blocks

    Star blocks for star projects! Each star is precisely shaped, sanded and ready for finishing. Small Star Block measures 7/8"D x 3-3/4"W x 3-3/4"H and is available in Maple, Red Oak, and Basswood.

    From: $6.99
  11. Acrylic Pen Blank - Black/Ivory

    Acrylic Pen Blank - Black/Ivory

    …Turns very quickly; take care to turn with light pressure.* Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian® polish, buffing compound or Hut finishing blocks.* Each blank is sold individually.* Pen hardware sold separately.

    $2.99 $1.99

    SAVE 33%

  12. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …no additional hardware required.* With purchase of the 2" Lift Blocks (49120, sold separately below), the Multi-Rest can be used on even larger lathes.* The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to…

    $359.95
  13. Ocean Mist Acrylic Handle Blank

    Ocean Mist Acrylic Handle Blank

    …approximately 1-1/2" x 1-1/2" x 6"L.* Turns very quickly; take care turning with light pressure.* Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian® polish, buffing compound or Hut finishing blocks.* Each blank is sold individually.

    1 Review(s)
    $15.79
  14. Bulls Eye® Shellac-Clear

    Bulls Eye® Shellac-Clear

    …100-150 sq. ft., depending on porosity.* Dries to touch in 30 minutes.* Let dry 1 hour before sanding with 220 grit or finer sandpaper.* Allow subsequent coats to dry at least 1 hour before sanding.* Cleanup with denatured alcohol or household ammonia and water.* This product is not dewaxed.* Not…

    From: $10.59
  15. Black Maple Block Inlay Banding, 3/16'' W

    Black Maple Block Inlay Banding, 3/16'' W

    …decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

    $14.99
  16. Maple Black Mahogany Block Inlay Banding, 1/4'' W

    Maple Black Mahogany Block Inlay Banding, 1/4'' W

    …decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

    $14.99
  17. Micro-Mesh Cushioned Abrasives

    Micro-Mesh Cushioned Abrasives

    Washable and reusable abrasives are great for sanding small projects on the lathe! Unique cushioning design results in extended abrasive life, the best surface finish possible, and fewer steps. Conforms to the shape while providing even pressure against the surface. Backed with a flexible cloth,…

    7 Review(s)
    From: $18.99
  18. Laguna Tools Resaw King Carbide Band Saw Blades   1"

    Laguna Tools Resaw King Carbide Band Saw Blades 1"

    …cuts reduce sanding time considerably* Long life and ultra-smooth cutting life makes this an easy choice over conventional blades* Anti-kickback feature* Blades can be resharpened* 93-1/2" blades fit standard 14" band saws* 105" blades fit standard 14" band saws with riser blocks* 125" blades fit…

    From: $215.99
  19. Rotten Stone, 1 Pound

    Rotten Stone, 1 Pound

    Pumice stone is ideal for finishing and refinishing wood surfaces by removing scratches, blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be…

    8 Review(s)
    $9.99
  20. Woodworker's Journal Turning Projects CD

    Woodworker's Journal Turning Projects CD

    …Blanks with Glue Blocks* Tips for the Skew-Chisel Challenged* Shaker Sewing Stand* Mastering Turned Eggs* Turned Fishing Lures* Faceplate-Turned Candleholders* Hollow Spiral Candleholder* Lathe Steady Rest* Hand-Turned Gavels* Pen Turning Basics* Turning Green Wood* Lathe Sanding Secrets* Starting…

    $4.99
  21. Cookies n' Cream Acrylic Handle Blank

    Cookies n' Cream Acrylic Handle Blank

    …approximately 1-1/2" x 1-1/2" x 6"L.* Turns very quickly; take care turning with light pressure.* Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian® polish, buffing compound or Hut finishing blocks.* Each blank is sold individually.

    $15.79
  22. Maple Hardwood Tops

    Maple Hardwood Tops

    …butcher-block tops. They are specially designed to fit our most popular shop stand sizes for gorgeous and practical workbenches, assembly tables, sanding stations, power tool stands and more. Use them to make your own workbenches and shop stands in no time. These tops are great for kitchens and…

    1 Review(s)
    From: $209.99
  23. Bendix Traditional Plynth Blocks-Maple

    Bendix Traditional Plynth Blocks-Maple

    These plynth blocks will add a fine look of distinction to your project. Each piece is precisely shaped, sanded and ready for finishing.* Small Plynth block measures 1"D x 1-1/8"W x 1-7/8"H. * Medium Plynth block measures 1-3/8"D x 1-3/4"W x 2-3/4"H.* Large Plynth block measures 1-7/8"D x 2-3/8"W x…

    From: $8.99
  24. Black Maple Mahogany Block Inlay Banding, 3/16'' W

    Black Maple Mahogany Block Inlay Banding, 3/16'' W

    …decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

    1 Review(s)
    $13.49
  • Items 1 - 24 of 59
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X