Screw Gage

  • Items 1 - 24 of 77
  • Page:
    1. 1
    2. 2
    3. 3
  1. Thread Detective Screw Gauge

    Thread Detective Screw Gauge

    Whether you're trying to identify loose screws or you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification ofbolt size, nut diameter and thread pitch. Standard…

    34 Review(s)
    $17.99
  2. Bolt Size-It Gauge

    Bolt Size-It Gauge

    Quickly and easily size bolts, screws, nuts and twist drills! Bolt Size-It also features ruler marked with inches and millimeters.* Gauge metric hex nuts and washers by holding under metric holes.* Resists water, alcohol, oil and grease.* Hard plastic.

    4 Review(s)
    $5.49
  3. 4'' Trim Gauge™ Multi-Purpose Tool

    4'' Trim Gauge™ Multi-Purpose Tool

    The little tool that can do it all! Easy-to-adjust sliding scale has horizontal and vertical spirit levels, locking thumb screw and 3/16" reveal. Conveniently handles a wide variety of workshop tasks: set trim and hardware, level, establish reveals, adjust power tool settings, scribe lines,…

    1 Review(s)
    $24.99
  4. Classic Style Bed Bolt Cover

    Classic Style Bed Bolt Cover

    This classic style bed bolt cover is made of extra heavy-gauge stamped solid brass for quality and durability.

    2 Review(s)
    $10.99
  5. Fleur-de-lis Style Bed Bolt Cover

    Fleur-de-lis Style Bed Bolt Cover

    This Fleur-de-lis style bed bolt cover is made of extra heavy-gauge stamped solid brass for quality and durability.

    $10.99
  6. 1-2-3 MicroGage

    1-2-3 MicroGage

    …tip for useon flat surfaces and a 3/8" diameter flat tip for use on round and sharp surfaces suchas jointer knives. Indicator carriage assembly slides smoothly along the entire block andis secured in position with a lock screw. Two rare earth magnets hold the dial indicator to the carriage assembly.

    1 Review(s)
    $119.00
  7. Adjustable Corner Support

    Adjustable Corner Support

    Levels heavy cabinets. Includes a heavy gauge bracket with a 5/16" - 8mm threading screw for solid, steady support of heavy cabinets. Adjusts within a 2- 3/8" range. Bolt is 2-3/4" long. Price for single bolt.

    8 Review(s)
    $4.59
  8. No-Mortise Bed Rail Brackets

    No-Mortise Bed Rail Brackets

    …maintain a perfect 90° angle. The 5/16" connecting bolt is held captive in the bed rail bracket, so you never have to worry about losing it. Made from 0.072 gauge zinc-plated cold-rolled steel. Assembled dimensions:1-3/8"W x 3-9/16"H. Includes enough brackets for one bed. Screws not included.

    $16.99
  9. Digital Wheel Marking Gauge

    Digital Wheel Marking Gauge

    …Easy-access battery compartment.* Beveled wheel cutter pulls gauge against stock.* Slices through grain rather than tearing, or following the grain.* Screw in wheel cutter is recessed for easy zeroing, and also enables the gauge to be used as a depth gauge.* Area where bar enters gauge face is…

    $39.99
  10. iGaging Ebony Marking/Mortise Gauge

    iGaging Ebony Marking/Mortise Gauge

    …reference surface.* Mortise Gauge measures 8" long, beam is 3/4" square.* Head measures 2-1/4" x 2-1/2" x 1-1/8".* Comfortable, knurled locking screw locks onto brass wear strip for no-slip performance.* Double pins adjust from about 1/4" to 2".* Adjustments are calibrated with a ruler; there are…

    2 Review(s)
    $44.99
  11. Wixey™ Mini Digital Height Gauge

    Wixey™ Mini Digital Height Gauge

    …measurements can be changed from mm to inches, to inches with fractions* Switches between ABS (preset) and INC (zeroset) measurement modes* Steel rule has dual metric and imperial scale* Locking screw keeps the rule from sliding* 4-3/8" wide x 5-1/2" high* Uses one CR2032 wafer battery (included)

    13 Review(s)
    $25.99
  12. Rockler Sure-Hook™ Universal Mount

    Rockler Sure-Hook™ Universal Mount

    screw column, measures exactly 1" long, making it simple to gauge what length of screw you should use. Additional features:* Rotates workpiece 360° for complete finishing from one spot.* Holds panels and spindles in ideal vertical position.* Retaining ring in mounting assembly holds loose screw

    4 Review(s)
    $5.99
  13. Rockler Sure-Hook™ Universal Mount-Sold in Packs

    Rockler Sure-Hook™ Universal Mount-Sold in Packs

    screw column, measures exactly 1" long, making it simple to gauge what length of screw you should use. Additional features:* Rotates workpiece 360° for complete finishing from one spot.* Holds panels and spindles in ideal vertical position.* Retaining ring in mounting assembly holds loose screw

    4 Review(s)
    From: $33.54
  14. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    …out flush to the blade, preventing drop-off pieces from splitting off unpredictably or getting jammed in the throat plate. Additional features:* Aluminum miter bar has adjustable nylon set screws to ensure a snug fit in the miter track.* Locking clamp on miter bar tightens with a single screw.

    2 Review(s)
    $28.99 $19.99

    SAVE 31%

  15. Clinch Nut Plates

    Clinch Nut Plates

    Use these durable clinch nut plates to easily mount straight table legs. The extra heavy gauge cold-rolled steel plate creates a rock-solid, removable assembly. Use with a 5/16" hanger bolts (not included). Sold in packs of four. Technical Details* Extra heavy duty steel* 2-5/8" square with 13/16" x…

    $5.49
  16. Adjustable Supports

    Adjustable Supports

    Includes a heavy gauge bracket, glide with bolt and a white plastic cap for the access hole. Also two great benefits: rugged construction and 3" adjustability for base cabinets. * Bolt is 3-1/2" long.* Adjusts within 3".* Bracket is 1-1/8" Wide x 1-5/8" High.

    5 Review(s)
    $5.39
  17. Portable Cross Cut Sled

    Portable Cross Cut Sled

    …Self-adhesive low-friction tape allows for smooth sliding of the platform and fence.* MDF Fence face can be removed for replacement.* Nylon set screws in the miter bar are adjustable to eliminate slop.* Adjustable 90° stop.* Requires standard miter track (3/4" wide x 3/8" deep) For complete…

    13 Review(s)
    $119.99
  18. Rear Mounted Swivel Mirror Hinge

    Rear Mounted Swivel Mirror Hinge

    Mirrors swivel with ease. Made from heavy gauge brass plated steel. Screws furnished. For low profile applications. Sold in pairs.

    7 Review(s)
    $8.39
  19. Starrett® 6'' Combination Square with Square Head

    Starrett® 6'' Combination Square with Square Head

    The combination square is one of the world's most practical and versatile tool inventions - the basic tool for every builder and craftsman. Features try/miter gauge, depth gauge, height gauge and marking gauge - all in one! With reversible lock bolt, scriber, spirit level and machine-divided blade…

    7 Review(s)
    $92.99
  20. Mag-Dro® Mitre Slot Base

    Mag-Dro® Mitre Slot Base

    …and more.* Fits most 6" calipers* Connects and disconnects to your caliper in seconds* Can be used in a variety of 3/4" table slots or clamped or screwed to a flat surface* Enables fast and precise measuring using a fixed point* Use it to check fence squareness against your mitre slot* Virtually…

    4 Review(s)
    $8.99
  21. Stop Block Kit

    Stop Block Kit

    Set it on the T-slot track for making the same length cuts over and over. You get a 5 star knob, a 1 1/2" long T-slot bolt and a 2" rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

    2 Review(s)
    $8.19
  22. Cabinet Pullout Single and Double Tier Wire Baskets, Rev-a-Shelf 5WB Series-Single Tier 18" Slides

    Cabinet Pullout Single and Double Tier Wire Baskets, Rev-a-Shelf 5WB Series-Single Tier 18" Slides

    …widths to fit many different applications. Single Tier Wire Baskets* Full extension 100lb rated ball bearing slides* Fully assembled and simple 4 screw installation* Limited Lifetime Warranty* 18" slides DETAILS PER SKU: 1002086* Dimensions: 14.375"W x 7"H x 22"D* Min. Cab. Opening: 14.5"W x 7.125"H…

    From: $37.99
  23. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …Hitachi M12VC (fixed and kit); Porter-Cable 690, 890, 7529, 97529 and 8529. Note: Current models of the Porter-Cable 892 require at least two screws to be 1/2" long versus 5/8".* Group B routers: DeWalt DW621 and DW621K; Craftsman Standard; Freud FT 1700E and 1702VCEK* Group C routers: Porter-Cable…

    3 Review(s)
    $349.99
  24. Kerf Mount Corner Brackets for Table Aprons-Kerf Mount

    Kerf Mount Corner Brackets for Table Aprons-Kerf Mount

    Corner braces will make your table stronger. Kerf mounted brackets. #34303 is kerf mounted and made of 14 gauge steel and is 3" X 4 3/4" and includes two holes for hanger bolts. #24281 is kerf mounted and made of 18 gauge steel and is 1 1/2" X 3". #24299 is kerf mounted and made of 18 gauge steel…

    10 Review(s)
    From: $3.19
  • Items 1 - 24 of 77
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X