Screw Inserts

  • Items 1 - 24 of 121
  • Page:
    1. 1
    2. 2
    3. 3
  1. Steel Threaded Inserts - Select size

    Steel Threaded Inserts - Select size

    …sizes. Size listed below is the size of the bolt (sold separately) that threads into the insert. Sold in packs of 8. Technical Details:* Can be installed with screwdriver, threaded insert wrench or threaded insert power drive tool.* Rugged steel construction.* Can be used for wood/wood joints, or…

    10 Review(s)
    From: $4.49
  2. Threaded Brass Inserts - Select size

    Threaded Brass Inserts - Select size

    …threaded insert wrench or threaded insert power drive.Solid brass threaded insert is easy to install. Drill a hole the same size as body insert. Diameter permits the use of machine screws and bolts instead of wood screws. Drive with 3/8" x 3/64" flatblade screwdriver or with threaded insert wrench…

    8 Review(s)
    From: $7.19
  3. Brass Cane Hardware

    Brass Cane Hardware

    …to exacting standards. Technical Details* All parts machined from solid brass* Threaded insert fits into a 13/32" diameter x 7/8" deep hole and has a flange diameter of 25/32"* Cane tip is 19/32" in diameter and fits onto a 31/64" tenon* For best results, use epoxy to install tip and threaded insert

    2 Review(s)
    $5.99
  4. Hinge Dowel Repair Kit

    Hinge Dowel Repair Kit

    Firm up worn hinge screw holes, fix mistakes, or replace missing screws in a jiffy with this Hinge Dowel Repair Kit! Designed for 35mm European cabinet hinges, you get eight #6 x 1/2" dowel screws and eight 8mm plastic dowels that are inserted into loose holes to provide a tight grip that keeps your…

    $2.19
  5. Thin Stock Threaded Inserts, 4-Pack

    Thin Stock Threaded Inserts, 4-Pack

    …hole where the insert will be, and you're ready forassembly. Accepts any bolt with a 10-32 threading. Technical Details:* Since the Thin Stock Threaded Insert is flat, it doesn't require the thick materialof a normal threaded insert. * Wide profile spreads out the load of the screw to prevent…

    $4.99
  6. Cap Nuts for Connector Bolts

    Cap Nuts for Connector Bolts

    Cap nuts work with connector bolts for surface to surface application. Use these with 1/4", #20 thread connector bolts. * 11/16" long. * Can be used with 5 mm hex driver.* 8 per pack.* Bolt shown is not included with cap nut.

    3 Review(s)
    $5.39
  7. Bed Rail Connection System

    Bed Rail Connection System

    …5/16" threaded inserts, threaded rod, nuts and slotted washers for 4 bed rail joints, plus 8 wood dowels. To install, drill a 35mm (1-3/8") flat-bottom hole and perpendicular 5/8" through-hole in the bed rail, and a 17/32" hole in the bed post to house the threaded insert. TIP: To speed installation…

    8 Review(s)
    $13.69
  8. Cross Dowels

    Cross Dowels

    Use with connector bolts for making strong right angle joints. Use to make strong right angle joints. Dowel is steel, 16mm L x 10 mm. Shown with connector 1/4" - 20 thread connector bolt SOLD Separately). * Choose the length of bolt you need.* 8 per pack.

    16 Review(s)
    $5.29
  9. 6-In 110VAC 250CFM In-Line Duct Fan

    6-In 110VAC 250CFM In-Line Duct Fan

    …system. Installation is easy: Simply cut the flexible or rigid duct where you want the fan installed, insert the duct,and then seal the duct with a nylon strap (for flexible ducts) or sheet metal screws (for ridged ducts).This 6-Inch In-Line Duct Fan uses high-performance balanced polycorbonate fan…

    $34.99
  10. Heavy-Duty Universal Connector

    Heavy-Duty Universal Connector

    …connector is ideal for bed rail connectors, shelving, table and workbench legs, and more. Sold in packages of 4 (includes 4 cams, 4 connecting bolts and 4 threaded inserts). Cam installs in 35mm (1-3/8") dia. hole, 11/16" deep. Bolt requires 10mm dia. hole. Requires minimum material thickness of 1".

    3 Review(s)
    From: $11.59
  11. Steel Hanger Bolts-Steel Hanger Bolts

    Steel Hanger Bolts-Steel Hanger Bolts

    …used with our Corner Brackets for Table Aprons. Pointed end of hanger bolt screws into a pilot hole in wooden member, while the other serves as a machine threaded stud that accepts a nut, T-nut or threaded insert. Deep screw threads bite into the wood to eliminate stripping and pull-out problems.…

    6 Review(s)
    From: $2.49
  12. PushMaster™ Picture Frame Joiner Kit

    PushMaster™ Picture Frame Joiner Kit

    …and easily inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.* For use with most types of frame clamps. Technical Details:* Includes PushMaster tool, 400 V-nails and instructions, plus a starter assortment of backing nails and flexipoints.* PushMaster tool inserts

    $89.99
  13. Screw-On Tee Nuts-Choose size thread

    Screw-On Tee Nuts-Choose size thread

    …won't drop out with use, making them the preferred method for installing threaded furniture levelers and glides. Technical Details * Available in 5/16" x 18 tpi, and 3/8" x 16 tpi pitch threads * Top plate is 1-1/4" in diameter * Made of zinc alloy * Mounting screws included * Sold in packs of eight

    12 Review(s)
    $9.79
  14. Riveting T-Nut Inserting Tool

    Riveting T-Nut Inserting Tool

    …once the bolt is inserted, sometimes resulting in the prongs stripping out the wood. The Riveting T-Nut system prevents this problem by permanently securing the T-nut to the panel with the Riveter Insertion Tool. Simply set the T-nut first with a hammer, then thread the insertion tool into it with…

    8 Review(s)
    $11.49
  15. Phenolic Table Saw Insert Kit

    Phenolic Table Saw Insert Kit

    …Just use our exclusive Phenolic Countersink Drill Bit (34423, sold separately) for the leveler holes. It is machined especially for phenolic, cuts quickly and won't wander. * Insert Kit includes two phenolic plates with 12 screws for leveling.* Phenolic plates measure 3-7/8" x 14" x 1/2" thick.

    31 Review(s)
    $31.99
  16. Low-Profile Threaded Insert

    Low-Profile Threaded Insert

    These low-profile threaded inserts work especially well on thin materials such as exposed veneer seating. The secret is in the "shouldered" edge, plus the 1/4-20 thread with a bolt stop feature that prevents the bolts from being threaded through the insert. Other features include an oversized…

    4 Review(s)
    $4.49
  17. 129-pc Jig Hardware Kit 1/4"-20 ($150 Value!)

    129-pc Jig Hardware Kit 1/4"-20 ($150 Value!)

    …1-1/2" T-bolts (20)* 2-1/2" T-bolts (10)* 3-1/2" T-bolts (10)* 5-star insert knobs (4)* 5-star bolt knobs (4)* 2" T-knobs (6)* 4-star insert knobs (6)* 4-star bolt knobs (6)* 1" round knobs (10)* Storage case (1)* Threaded inserts (16)* T-nuts (16) Note: Bottomplates on 1/4"-20 T-bolts measure 9/16"…

    8 Review(s)
    $49.99 $39.99

    SAVE 20%

  18. Swivel Mirror Screws

    Swivel Mirror Screws

    Swivel Mirror Screws give your mirror old-fashioned charm! Allows easy mirror movement. A 3-1/2" long steel bolt with a styled brass head. Includes 2-1/4" threaded insert. The threaded insert length of thread is 9/16 with a 3/16" thick head, (3/4" overall).

    9 Review(s)
    From: $12.59
  19. 5-Star Jig Knobs

    5-Star Jig Knobs

    …on the hands and provide plenty of torque for use as jig knobs on fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings.

    12 Review(s)
    From: $1.99
  20. Magnetic Touch Latch

    Magnetic Touch Latch

    Magnetic Touch Latch featuring a threaded insert for easy installation. Drill a 14mm diameter x 1- 1/32" deep hole for the threaded insert, and then simply screw into place.

    $7.49
  21. #2 Phillips x 1'' Drywall Dimpler Insert Bit

    #2 Phillips x 1'' Drywall Dimpler Insert Bit

    Lutz® high-performance power bits like this #2 Phillips x 1" Drywall Dimpler Insert Bit are made from heat-treated S-2 tool steel for maximum durability and longer life! Technical Details:* Lutz® high-performance drywall dimpler bit* Made from heat-treated S-2 tool steel for maximum…

    $1.59
  22. SawStop Zero Clearance Lock Down Insert Dado Blade

    SawStop Zero Clearance Lock Down Insert Dado Blade

    …SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 8" dado blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in the…

    $39.00
  23. 1" Round Knob for Shop Jigs-Threaded insert

    1" Round Knob for Shop Jigs-Threaded insert

    These 1" Round Knobs with Bolt are ideal for jigs, router tables, drill presses and other similar applications. They work great with our T-Slot System. Choose from threaded insert or 1" bolt.

    2 Review(s)
    From: $2.19
  24. 4-In 110VAC 80CFM In-Line Duct Fan

    4-In 110VAC 80CFM In-Line Duct Fan

    …system. Installation is easy: Simply cut the flexible or rigid duct where you want the fan installed, insert the duct,and then seal the duct with a nylon strap (for flexible ducts) or sheet metal screws (for ridged ducts).This 4-Inch In-Line Duct Fan uses high-performance balanced polycorbonate fan…

    $27.99
  • Items 1 - 24 of 121
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X