Screws For Drawer Slides

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Drawer Slide Mounting Screws Truss Head/Phillips

    Drawer Slide Mounting Screws Truss Head/Phillips

    Drawer Slide Mounting Screws! Features a truss head/Phillips that gives you non-slip fastening and Phillips for convenience. * Comes in packs of 100* Screw Size: #8 x 1/2"* Screw Finish: Black Technical Details: * For ball bearing slides and catches (roller and magnetic)* Truss head/Phillips for

    $4.19
  2. White Plastic Guide Rails for 17mm 21/32'' Grooved Drawers

    White Plastic Guide Rails for 17mm 21/32'' Grooved Drawers

    Add stability to your drawer with easy-to-install, screw-on side-mount plastic rails.* Product Dimensions: 285mm (11.22") long x 8mm (.32") thick x 16 mm (.63") high* The groove in the drawer needs to be 17mm (.67") high* Includes screws* White

    $3.29
  3. Laptop Security Drawer

    Laptop Security Drawer

    for extended computer use without fatigue or laptop overheating. It includestwo smooth-rolling 3/4 extension slides. And at 1-3/4" x 17-3/4"x 13-1/4" itaccommodates most laptop computers. Comes pre-assembled. Screws not included. Keep your laptop locked up right with this convenient storage drawer!

    $104.99
  4. Festool 12-Drawer Sortainer

    Festool 12-Drawer Sortainer

    …solution for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Twelve Small drawers can be accessed from both sides, and each features its own latch, ensuring that drawers don't slide or…

    1 Review(s)
    $165.00
  5. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    …easy drawer installation and removal.* Drawer height adjustment with 3 mm range (about 1/8").* Drawer slides accept #6 wood screws or 6mm euro screws.* Minimum drawer side thickness is 1/2" (13mm).* Maximum drawer side thickness is 5/8" (16mm).* Load rating is 75 lbs dynamic, 100 lbs static.* Drawer

    From: $29.99
  6. #6 x 5/8" Flathead Zinc Screws (400 per pack)

    #6 x 5/8" Flathead Zinc Screws (400 per pack)

    #6 x 5/8" Flathead Zinc Screws designed for the Blum Low-Profile 3/4 Extension Drawer Slides.* Pack of 400.

    $10.49
  7. Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    slide is simply screwed to the inside edge of the face frame, while the rear end slips into the brackets, which are screwed to the cabinet back. * Designed for use with Shop Basics™ GS757 Over-Travel Drawer Slides (e.g. 43765, sold separately).* Sturdy steel construction.* Slotted holes for

    $4.99
  8. Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    Same great slides, sold in cases of 25 sets per case for those with large quantity needs. Screws sold separately. Each case of 25 slides requires one pack of 52532 screws (400 per pack). These epoxy coated drawer slides are among the quietest, smoothest and lowest profile (only 7/8" ) slides on the…

    7 Review(s)
    From: $122.99
  9. Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    …disconnect for easy drawer removal and reinsertion.* Front face frame hole sized for wood screws.* Compatible with 1/2" to 5/8" drawer box thicknesses.* Up to 24" wide drawer compatibility.* Precision adjustment features slotted holes to allow for front-to-back adjustment of the slide during…

    9 Review(s)
    From: $38.99
  10. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …optional Side Caddy) base cabinet opening with a drawer above it. Because the slide unit mounts to the bottom of the cabinet, however, the SmartCab will fit into virtually any cabinet, making it ideal for remodelers and retrofit applications.* Ideal for use as a small pantry, or to store kitchen…

    $219.99
  11. Blum Slide Jig Gun

    Blum Slide Jig Gun

    …frame installations of Blum epoxy coated drawer slides by simply positioning the jig. Quick, accurate, easy, and absolutely level every time. Technical Details:* Used for positioning cabinet profiles on cabinet sides * Holds cabinet profile in place while screws are installed or pilot holes are made…

    7 Review(s)
    $21.99
  12. Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    Same great slides, sold in cases of 25 sets per case for those with large quantity needs. Screws sold separately. Each case of 25 slides requires one pack of 52532 screws (400 per pack). These epoxy coated drawer slides are among the quietest, smoothest and lowest profile (only 7/8" ) slides on the…

    7 Review(s)
    $157.49
  13. Drawer Slide/Hardware Kits for Pullout Shelf Kit

    Drawer Slide/Hardware Kits for Pullout Shelf Kit

    …are included in the kit to make two rolling shelves (if both are cut to 15" wide or less) when used with the Birch Pullout Shelf Kits (sold separately). The 22" Kit with the 22" Birch Pullout Kit (29847). The kit includes one pair of standard guides,two side panels, a bag of screws and two spacers.

    $46.79
  14. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …full-extension slides are mounted into the cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig…

    $9.99
  15. Drawer Front Adjuster

    Drawer Front Adjuster

    This adjuster allows perfect false front alignment.* Adjuster allows 360° of movement for any applied false front drawer face.* An eccentric hub adjusts up to 1/8" in any direction.* Requires a 25 mm hole.* Screws supplied.* 8 per pack.

    3 Review(s)
    $11.39
  16. Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    …can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited Lifetime…

    From: $22.49
  17. Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    …can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited Lifetime…

    From: $23.49
  18. Corner Mounting Bracket

    Corner Mounting Bracket

    drawer fronts! These durable plastic brackets install in minutes and allow for vertical and horizontal adjustment of drawer "false" fronts. Package includes six brackets (enough for 3 drawers) and screws. Technical Details* Slotted screw holes permit vertical and horizontal adjustment of drawer

    2 Review(s)
    $3.79
  19. 1-1/4" QuikTray Rollout Shelf Systems

    1-1/4" QuikTray Rollout Shelf Systems

    …your drawer slides connect to the vertical supports using "hook dowels" rather than screws, they can be adjusted for height in seconds without tools. For undermount slides, T-508 hook dowels are needed (Sold Separately). For side mount slides, T-506 hook dowels are needed (Sold Separately). For the…

    1 Review(s)
    $19.99
  20. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …FastBlocks per side to block out drawer guides for pull-out shelves. Technical Details:* Adjusts up and down 3/16".* Adjusts in and out from 5/8" to 1".* Durable and permanent.* Flippable adjustment block accepts both wood screws and euro screws.* Great for face frame cabinets, euro…

    1 Review(s)
    $1.99
  21. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    …wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only 4 screws*

    $54.49
  22. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    …wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only 4 screws*

    $62.99
  23. Adjustable Pulls

    Adjustable Pulls

    …theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're ready to install yourpull for a unique look. Adjustable to 4-1/4" from base to base. 4-3/4" overall length.Mounting screws included. Available in three…

    2 Review(s)
    $12.99
  24. Festool 4-Drawer Sortainer

    Festool 4-Drawer Sortainer

    for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Two Small, one Medium, and one Large drawer can be accessed from both sides, and each features its own latch, ensuring that drawers

    $150.00
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X