Sharpening System

  • Items 1 - 24 of 90
  • Page:
    1. 1
    2. 2
    3. 3
  1. Work Sharp™ WS3000 Tool Sharpener

    Work Sharp™ WS3000 Tool Sharpener

    …The system's repeatability allows you to sharpen multiple tools at any combination of angles and abrasive type without extra setup.* Routed airflow and heat sink system keeps tools cool without the mess of a wet system.* Sharpening port enables you to select desired bevel angle and sharpen precise,…

    53 Review(s)
    $199.99
  2. Plate Glass Sharpening System-Fine

    Plate Glass Sharpening System-Fine

    Keep your sharpening chisels, plane irons, jointer knives and other expensive tools honed to perfection using this 12'' square x 1/4'' thick plate glass system. The plate glass is guaranteed to be the most level surface you can find to lap all your tools. The Fine Sharpening System consists of the…

    17 Review(s)
    From: $11.19
  3. Work Sharp WS2000 Tool Sharpener

    Work Sharp WS2000 Tool Sharpener

    …P220 slotted discs (4). * Dry sharpening system means no need for oil and water, and no mess.* Routed airflow and heat sink system keeps tools cool so the temper will be unaffected.* Sharpening port lapping surface features "plunge-pull" sharpening technique.* Sharpening port abrasive increases burr…

    18 Review(s)
    $79.99
  4. T3 Tormek Sharpening System

    T3 Tormek Sharpening System

    Keep a razor-sharp edge on a variety of tools with this full-service water-cooled system. The Tormek method uses jigs to guide your tools so that only minute fractions of steel are removed at each sharpening. It takes less time and extends the life of your tools. The slow-speed 220-grit grindstone…

    3 Review(s)
    $379.00
  5. Plate Glass Sharpening System-Coarse

    Plate Glass Sharpening System-Coarse

    Keep your sharpening chisels, plane irons, jointer knives and other expensive tools honed to perfection using this 12'' square x 1/4'' thick plate glass system. The plate glass is guaranteed to be the most level surface you can find to lap all your tools. The Coarse Sharpening System includes the…

    17 Review(s)
    From: $9.99
  6. Nova Sharpening Center Attachment

    Nova Sharpening Center Attachment

    …find your favorite grinds.* Slideway makes dressing the wheel easy. Good sharpening starts with a flat, square wheel.* The system is easy to customize and accessorize. The Nova Sharpening Center can be used to easily sharpen the following tools: * Bowl gouges: standard grind, modern side grind,…

    $104.99
  7. Robert Sorby Sovereign Ultima Hollowing Tool-Accessories

    Robert Sorby Sovereign Ultima Hollowing Tool-Accessories

    …clogging in normal use* A high-performance cutter system which slices through wood rather than scrapes* Adjustable cutter depth for heavy or light cuts with fine micro adjustment for extra finesse* Removable cutter can be easily replaced or sharpened with diamond hone* 100% manufactured in the UK

    From: $22.99
  8. Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    …the scissors' thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $52.00
  9. Robert Sorby ProEdge Plus Sharpening System

    Robert Sorby ProEdge Plus Sharpening System

    …Use ProEdge aluminum oxide sharpening belts for bench and carving chisels, knives and plane irons.* Use ProEdge zirconium sharpening belts for HSS turning tools, drill bits and router bits.* Use ProEdge ceramic sharpening belts for rapid, heavy-duty sharpening.* 1/2 hp (375w) motor.* 700 ft…

    1 Review(s)
    $524.99
  10. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …by simply varying the rate of feed. Plus, the standard system now includes the SP-650 Stone Grader. Simply press it onto the wheel to grade the wheel up to 1000 grit and flip it over to return the wheel to coarse grinding. T-7 Sharpening System Details:* Square Edge Jig accepts blades up to 76mm or…

    $805.00
  11. Robert Sorby Sovereign Ultima Hollowing Tool

    Robert Sorby Sovereign Ultima Hollowing Tool

    …clogging in normal use* A high-performance cutter system which slices through wood rather than scrapes* Adjustable cutter depth for heavy or light cuts with fine micro adjustment for extra finesse* Removable cutter can be easily replaced or sharpened with diamond hone* 100% manufactured in the UK

    $186.99
  12. Three Stone Oil Sharpening System

    Three Stone Oil Sharpening System

    Includes three 6" stones (1 Hard Arkansas: fine, 1 soft Arkansas: medium, and 1 Aluminum Oxide: Coarse), 1 ounce premium honing oil and sharpening angle guide.

    8 Review(s)
    $41.99
  13. Tormek AngleMaster WM-200

    Tormek AngleMaster WM-200

    …built-in magnets that keep the AngleMaster close to your shop tool for easy reference. Works with both the Tormek T-7 (35254) and T-3 (33377) Sharpening Systems.* Grind your tool to any desired edge angle from 10° to 75° with an accuracy of 1°* Use it to measure an existing edge angle of…

    $26.00
  14. Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    …setting can be noted on a special recipe label, which is attached to the ferrule. A special pen, which works on these labels is included. For turning cutters there is a shaft with a mounting screw and a 2,5 mm allen key. Best Used With: Tormek T-7 Sharpening System. Click Here to View Instructions:

    2 Review(s)
    $94.00
  15. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    SAVE on the Ultimate sharpening assortment! We've bundled the Tormek T-7 Sharpening System with the Tormek Woodturner's Accessory Kit, Planer/Joiner Blade Jig, and Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your…

    $1307.00
  16. Tormek Bench Grinder Mounting Set

    Tormek Bench Grinder Mounting Set

    …Allows you to use your bench grinder for shaping with the Tormek sharpening system* Allows you to use Tormek jigs with your bench grinder* With or without Tormek machine you can still benefit from the precise Tormek jig system on your bench grinder and easily get the desired shape and edge angle*…

    $64.00
  17. Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Horizontal Base for Universal Support (XB-100) - Tormek Sharpening System

    Lets you move the Universal Support on Tormek Sharpening Systems from the vertical position (with the wheel turning into the edge being sharpened) to the horizontal position (for grinding away from the edge).

    $26.00
  18. 6" Cloth-Backed PSA Abrasive Discs, Pack of 4

    6" Cloth-Backed PSA Abrasive Discs, Pack of 4

    …sizes for disc sanders, and the smaller sizes for hand sanders and orbital sanders. The abrasive discs are made with a phenolic resin adhesive system that gives excellent durability to cloth-backed abrasives. The cloth backing is highly resistant to tearing compared to paper, and can be used wet…

    0 Review(s)
    $16.79 $7.99

    SAVE 52%

  19. Robert Sorby Sovereign Ultima Sharpening Jig

    Robert Sorby Sovereign Ultima Sharpening Jig

    …to know how to sharpen tools as it is to use them! This Sovereign Ultima Cutter Sharpening Jig from Robert Sorby makes the process quick, easy, and exact! * Made from phosphor bronze * Gives you full access to the cutting edge* Rotates within its sleeve, making it easy to sharpen cutters using a…

    $34.99
  20. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    …towards the edge. The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $54.00
  21. Stone Grader SP-650 for Tormek T-7 Sharpening System

    Stone Grader SP-650 for Tormek T-7 Sharpening System

    …(approx. 1000 grit). When pressing the coarse side onto the grindstone, the smoothened surface is returned to its normal condition (220 grit). This process does not place excessive wear on the grindstone and can be repeated any number of times. Best Used With: 35254 -Tormek T-7 Sharpening System

    1 Review(s)
    $28.00
  22. 1200-Grit Trizact Sharpening Belt for ProEdge Plus Sharpening System

    1200-Grit Trizact Sharpening Belt for ProEdge Plus Sharpening System

    Replacement 1200-Grit Trizact Sharpening Belt for the Robert Sorby ProEdge Plus Sharpening System (26342, sold separately). Trizact belts feature an engineered surface of microscopic three-dimensional structures resembling pyramids and are ideally suited for fine finishing of stainless steel,…

    $18.99
  23. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting…

    $66.00
  24. Nova Comet II 12'' x 16-1/2'' Midi Lathe

    Nova Comet II 12'' x 16-1/2'' Midi Lathe

    …Adaptable Technology, paired with the optional accessory attachments, transforms the lathe into an all-in-one wood turning and woodworking system. Features of the Nova Comet II:* Electronic variable speed motor offers a wide RPM range from 250 to 4000 RPM - perfect for a variety of projects…

    2 Review(s)
    $499.99
  • Items 1 - 24 of 90
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X