Shear Bit

  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
  1. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  2. 2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  3. Mini-X Tru-Fit Dril Bit

    Mini-X Tru-Fit Dril Bit

    …2x or NEW Mini-X Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Dowels available in three sizes: 1x for boards up to 1" thick, and 2x for boards up to 1-3/4" thick and NEW Mini-X for joining 1/2" stock. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also available…

    $12.59
  4. Freud  Cove Router Bit 30-114

    Freud Cove Router Bit 30-114

    Create smooth, classic cove profiles with this cove bit from Freud! Bit features a shear angle that effortlessly slices through wood in much the same way a craftsman would with a hand plane. Cuts all composition materials: plywoods, hardwoods, and softwoods. Use on hand-held or table-mounted…

    $36.97
  5. 6-Pc. Fractional Forstner Bit Set

    6-Pc. Fractional Forstner Bit Set

    …15/16" bits with 3/8" round shanks.* Great for instrument mounting, cutting arcs, overlapping holes, and boring through veneer or other thin materials.* Bits have two bottom cutting edges that efficiently shear through wood.* Exterior cutting rim, along with the inner brad point, keeps the bit in…

    20 Review(s)
    $33.49
  6. Freud No Lip Door Edge Bit

    Freud No Lip Door Edge Bit

    …ogee profile on the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted…

    $57.47
  7. Freud 3-Piece Undersized Plywood Router Bit Sets

    Freud 3-Piece Undersized Plywood Router Bit Sets

    …The down shear design on the 23/32'' bit virtually eliminates splintering, and all bits feature Freud's TiCo Hi-Density Carbide to withstand the rigors of routing plywood containing high glue content, which rapidly dulls standard bits. The Non-Stick Perma Shield Coating also protects bits from heat…

    From: $51.47
  8. Freud Adjustable Tongue & Groove Bit Set

    Freud Adjustable Tongue & Groove Bit Set

    …design features a tongue cutter with opposing shear angles to ensure a flawless finish. Each bit is coated in Silver I.C.E. - a revolutionary coating that minimizes heat and pitch build-up. Features TiCo™ Hi-Density carbide for a longer bit life and flawless finish.* Adjustable at .002 inch…

    7 Review(s)
    $79.97
  9. Freud Quadra-Cut Classical Cove & Round Bit

    Freud Quadra-Cut Classical Cove & Round Bit

    This bit routs a classic edge profile for cabinets, furniture, plaques, and millwork. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Two large cutters shear upward…

    $54.97
  10. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    …Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upward to carve out most of the cut, while two small cutters shear downward to clean up the edges with absolutely no fuzzing or chipping.* Use 1/2" height for 5/8" stock. Use 5/8"…

    $98.97
  11. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    …tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts…

    1 Review(s)
    $98.97
  12. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    …cross-grain cuts in difficult materials. Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for the most efficient chip ejection.* Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.*…

    $98.97
  13. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    …wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an absolutely splinter- and fuzz-free edge, even on cross-grain cuts in difficult…

    1 Review(s)
    $104.47
  14. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  15. Raised Panel Router Bit - Straight - Horizontal

    Raised Panel Router Bit - Straight - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors.…

    4 Review(s)
    From: $64.99
  16. Raised Panel Router Bit - Ogee - Horizontal

    Raised Panel Router Bit - Ogee - Horizontal

    …horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured to…

    2 Review(s)
    From: $64.99
  17. Raised Panel Router Bit - Cove - Horizontal

    Raised Panel Router Bit - Cove - Horizontal

    …horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured to…

    3 Review(s)
    From: $64.99
  18. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  19. Freud Mortising Bits

    Freud Mortising Bits

    The down shear angle of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep…

    2 Review(s)
    From: $18.47
  20. Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    …jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 2" thick.…

    5 Review(s)
    $89.99
  21. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    …jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 1" thick.…

    5 Review(s)
    $49.99
  22. Freud Double Flute Straight Bits - 1/4'' Shank

    Freud Double Flute Straight Bits - 1/4'' Shank

    Application: General stock removal with a smooth finish.* Freud straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic…

    From: $14.97
  23. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    …tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. * Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4"…

    2 Review(s)
    From: $104.47
  24. Freud Quadra-Cut™ Bevel Raised Panel Bits

    Freud Quadra-Cut™ Bevel Raised Panel Bits

    …plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish.* Use 1/2" height for 5/8" stock. * Use 5/8" height for 3/4" stock.* Cuts all composition…

    1 Review(s)
    From: $98.97
  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
Feedback X