Shear Router Bit

  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
  1. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  2. Freud Double Flute Straight Bits-Optional Sizes

    Freud Double Flute Straight Bits-Optional Sizes

    …straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    4 Review(s)
    From: $17.97
  3. 2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  4. Freud  Cove Router Bit 30-114

    Freud Cove Router Bit 30-114

    …profiles with this cove bit from Freud! Bit features a shear angle that effortlessly slices through wood in much the same way a craftsman would with a hand plane. Cuts all composition materials: plywoods, hardwoods, and softwoods. Use on hand-held or table-mounted portable routers. The 1/2" radius…

    $36.97
  5. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    …of up and down shear flutes eliminate chipping on both sides of double-sided veneers or laminated materials for a fine finish.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $81.97
  6. Freud 3-Piece Undersized Plywood Router Bit Sets

    Freud 3-Piece Undersized Plywood Router Bit Sets

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  7. Raised Panel Router Bit - Straight - Horizontal

    Raised Panel Router Bit - Straight - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors.…

    4 Review(s)
    From: $64.99
  8. Raised Panel Router Bit - Ogee - Horizontal

    Raised Panel Router Bit - Ogee - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    2 Review(s)
    From: $64.99
  9. Raised Panel Router Bit - Cove - Horizontal

    Raised Panel Router Bit - Cove - Horizontal

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    3 Review(s)
    From: $64.99
  10. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  11. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  12. Cove Router Bits-1/2 Inch Shank

    Cove Router Bits-1/2 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $25.99
  13. Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    …in just two router passes-all without a straightedge! No need to strain your back lifting and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be…

    5 Review(s)
    $89.99
  14. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    …in just two router passes-all without a straightedge! No need to strain your back lifting and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be…

    5 Review(s)
    $49.99
  15. Roundover/ Beading Router Bits-1/4 Inch Shank

    Roundover/ Beading Router Bits-1/4 Inch Shank

    …combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading mode. Shear angle…

    13 Review(s)
    From: $22.99
  16. Roundover/ Beading Router Bits-1/2 Inch  Shank

    Roundover/ Beading Router Bits-1/2 Inch Shank

    …combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading mode. Shear angle…

    13 Review(s)
    From: $22.99
  17. Freud Quadra-Cut Classical Cove & Round Bit

    Freud Quadra-Cut Classical Cove & Round Bit

    …with cross-grain cuts in difficult materials. Two large cutters shear upward to carve out the profile, while two smaller cutter shear downward to clean up any fuzzing along the edges.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers

    $54.97
  18. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    …carve out most of the cut, while two small cutters shear downward to clean up the edges with absolutely no fuzzing or chipping.* Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.* Cuts all composite materials, plywoods, hardwoods and softwoods.* Use on table-mounted portable routers.

    $98.97
  19. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    …that shear upward for the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.* 5/8" carbide height is ideal for 3/4" stock.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

    1 Review(s)
    $98.97
  20. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    …to shear the top edge for a splinter-free surface and two large wings that shear upward for the most efficient chip ejection.* Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

    $98.97
  21. Freud No Lip Door Edge Bit

    Freud No Lip Door Edge Bit

    …the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $57.47
  22. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    …wainscoting, as well as for decorative tops, plaques and molding. Freud's revolutionary Quadra-Cut™ design combines two large wings that shear upward for a smooth finish, and two small wings that cut downward for an absolutely splinter- and fuzz-free edge, even on cross-grain cuts in difficult…

    1 Review(s)
    $104.47
  23. Freud Adjustable Tongue & Groove Bit Set

    Freud Adjustable Tongue & Groove Bit Set

    …design features a tongue cutter with opposing shear angles to ensure a flawless finish. Each bit is coated in Silver I.C.E. - a revolutionary coating that minimizes heat and pitch build-up. Features TiCo™ Hi-Density carbide for a longer bit life and flawless finish.* Adjustable at .002 inch…

    7 Review(s)
    $79.97
  24. Freud Mortising Bits

    Freud Mortising Bits

    The down shear angle of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep…

    2 Review(s)
    From: $18.47
  • Items 1 - 24 of 35
  • Page:
    1. 1
    2. 2
Feedback X