Shims

  • Items 1 - 24 of 62
  • Page:
    1. 1
    2. 2
    3. 3
  1. Router Table Jointing Shims - 6 Pack

    Router Table Jointing Shims - 6 Pack

    Allows outfeed fence to be shimmed in .010" increments when using the router table to edge-joint boards.* Shims can be combined to shave .070" off an edge. * Designed for use with the Rockler router table fence.* Shims measure 2" high x 14" long.* Includes six plastic shims in these thicknesses:…

    15 Review(s)
    $6.99
  2. Freud Professional Dado Sets

    Freud Professional Dado Sets

    …produce grooves from 1/4" to 7/8" in 1/16" increments. All blades and chippers come with Freud's antikickback design. This dado set comes with a shim set and carrying case as well as instructions on how to make basic dado sizes. Technical Details: * Carbide teeth.* Available in 8" or 6" diameter.*…

    5 Review(s)
    From: $86.47
  3. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    …without using a dado set or saw blade. The SBOX8 Box Joint Cutter Set makes box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. This patent pending innovation enables users to produce perfectly square, precise box joints quickly and cleanly the very…

    1 Review(s)
    $94.97
  4. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …glass panel cabinet doors.* Includes four .060" shims, two .030" shims, 3/8" HSS Drill Bit and a molded plastic case with added space for the optional accessory kits.* All Accessory Kits include corresponding guide block, HSS drill bit and shim set. Technical Details:* Beveled cutout in the drill…

    29 Review(s)
    $29.99
  5. Router Table Shim

    Router Table Shim

    Necessary accessory for mounting a Phenolic Router Table Top to the Rockler Steel Router Table Cabinet (41427, sold separately).

    $15.00
  6. Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Bevel Raised Panel Bits with BackCutters

    …materials. Technical Details:* Exclusive Quadra-Cut™ design combines a backcutter with the smooth cuts of Freud's 2+2 RaisedPanel Bits.* Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility.* Patented design allows these…

    1 Review(s)
    $119.97
  7. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    This arbor includes two slotting cutters, two bearings and a pack of shims that allow you to configure and adjust the cutter for perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long…

    10 Review(s)
    $59.99
  8. 1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/2" Accessory Kit for the Beadlock® Kit (34802) include corresponding guide block, HSS drill bit and shim set.

    $26.99
  9. Inline Stop for Rockler T-Track System

    Inline Stop for Rockler T-Track System

    …a board between two stops so you can scrape, sand or plane in either direction. If you need light clamping pressure, tap a pair of carpenter's shims between one of the stops and you have a very secure holding system for light routing tasks or carving. The keyway on the bottom of the Inline Stop…

    $6.99
  10. Freud SD608 8'' Dial-A-Width Dado

    Freud SD608 8'' Dial-A-Width Dado

    …designed specifically for glue line rips to ensure superior cut and maximum life. With precision-ground arbors for precise blade alignment. No More Shims Each "click of the dial adjusts the blade by .004" with an adjustable width range of 1/4" to 29/32". Flawless Finish Over size teeth allow for…

    6 Review(s)
    $274.97
  11. Freud 99-760 Premier Adjustable Rail and Stile Bit Set

    Freud 99-760 Premier Adjustable Rail and Stile Bit Set

    Produce perfect-fitting beaded stile and rail doors from 5/8" to 1-1/4" thick! Adjustable shims enable a tight fit when using plywood as thin as 7/32" (5.5mm), and also allow use with thick panels. To produce the front of a longer tenon profile for blind tenons, through tenons or bridle joints,…

    4 Review(s)
    $127.47
  12. Avenger 8'' x 42T Stack Dado Set, While Supplies Last!

    Avenger 8'' x 42T Stack Dado Set, While Supplies Last!

    …blades with 6 teeth per blade and solid bodies, (4) 1/8", (1) 1/16"* Cut range is 1/8" to 3/4" with just the blade stack, add shims to cut even wider* 8 piece shim kit lets you cut a custom-thick dado to your specifications* All teeth are C-4 carbide and can be resharpened many times* Industrial…

    9 Review(s)
    $89.99
  13. Oshlun 8'' Stack Dado Set

    Oshlun 8'' Stack Dado Set

    …wood, artificial and processed woods, and melamine. Technical Details:* Two 8" x 42 tooth x 5/8" arbor outside saws with 1/8" thick kerfs.* Six 6-tooth full-body chippers (four 1/8", one 1/16" and one 3/32").* Steel Shim Set for fine adjustments.* Dado range is 1/4" to 29/32".* Maximum RPM 9500.

    34 Review(s)
    $104.99
  14. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …edging flush with the panel. Features:* One Time Set Up - Set up the CRB7 to fit your favorite router just once with a set of 4 injection molded shims.* Quick Change - Unlike most router jigs, the CRB7 can be fitted/removed in less than 10 seconds, with no fiddly screws or cantering jigs required.*…

    6 Review(s)
    $79.99
  15. Murphy Door Bookcase Hardware - Build A Secret Passage Door!

    Murphy Door Bookcase Hardware - Build A Secret Passage Door!

    …Installation instructions guide you in locating and installing the hinges. Installation is simple - just set the Murphy Doorbookshelf into place, shim to level and plumb, and attach! Even a novice can install the door in less than half a day. The door can be installed so that the hinges are on…

    $129.95
  16. Oshlun 6'' Stack Dado Set

    Oshlun 6'' Stack Dado Set

    …wood, artificial and processed woods, and melamine. Technical Details:* Two 6" x 30 tooth x 5/8" arbor outside saws with 1/8" thick kerfs.* Six 5-tooth full-body chippers (four 1/8", one 1/16" and one 3/32").* Steel Shim Set for fine adjustments.* Dado range is 1/4" to 29/32".* Maximum RPM 7000.

    21 Review(s)
    $83.99
  17. Freud 97-154, 3-Piece Door Set

    Freud 97-154, 3-Piece Door Set

    …tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield®…

    3 Review(s)
    $183.47 $128.42

    SAVE 30%

  18. Freud 3-Piece Door Set 97-156

    Freud 3-Piece Door Set 97-156

    …bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield®…

    0 Review(s)
    $195.97
  19. Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters

    …architecturally correct appearance.* Exclusive Quadra-Cut™ design combines a backcutter with the smooth cuts of Freud's 2+2 Raised Panel Bits.* Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4".* These bits produce a full 1-1/2" wide reveal for traditional raised…

    1 Review(s)
    $119.97
  20. Irwin Marples 8'' Stacked Dado Set, 12T

    Irwin Marples 8'' Stacked Dado Set, 12T

    Plow out perfect, flat-bottomed grooves from 1/4" to 7/8" wide with the Irwin Marples 8" Stacked Dado Set. With 3 spacers and 7 shims, it's easy to get the perfect width without having to "wobble" the blade, which can cause chipping. Up to 20 different widths can be achieved with different…

    $119.99
  21. Rockwell Sonicrafter® 1-3/8'' End Cut Blades, 6-Pack

    Rockwell Sonicrafter® 1-3/8'' End Cut Blades, 6-Pack

    …Wood blades for wood, plastic and drywall; and the Precision Wood blades for fine cutting of wood and soft plastics. Great for plunge cutting, shimming and precision cuts. Stepped profile allows the blade to cut flush with the surrounding surface. Designed for use with Rockwell Sonicrafter®…

    $41.99
  22. SD508 Freud Dado Set

    SD508 Freud Dado Set

    …handle today's undersized plywood. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and…

    5 Review(s)
    $199.97
  23. Surface-Mount Face-Frame Hinge

    Surface-Mount Face-Frame Hinge

    …hinge for face-frame cabinets! These hinges make it easier than ever to get great looking cabinets without having to pre-bore doors or create shims. Designed for use on materials from 5/8" to 3/4" thick, they allow overlays of 1/2" to 5/8" (depending on door thickness). Sold in pairs.* Side-to-side…

    4 Review(s)
    $8.29
  24. FastCap® Best Fence Bench Mount Application System-Best Fence Bench Mount Systems

    FastCap® Best Fence Bench Mount Application System-Best Fence Bench Mount Systems

    Building extension wings for a miter saw station in your workshop used to mean lots of testing and shimming to get everything straight and level. Not anymore! Now you can get the awesome flexibility of the Best Fence on your workbench. Specially designed Precision Adjustment Blocks fasten to your…

    $449.99
  • Items 1 - 24 of 62
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X