Silicon Carbide

  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
  1. Plate Glass Sharpening System-Coarse

    Plate Glass Sharpening System-Coarse

    …to be the most level surface you can find to lap all your tools. The Coarse Sharpening System includes the glass plate, honing guide, 25 soft plastic feet, and two each of 220, 320, 400, and 600 grit, 4-1/2" x 11" Klingspor silicon carbide A™ weight paper with a "peel and stick" backing.

    17 Review(s)
    From: $9.99
  2. Norton Crystalon Bench Stone, Dual-Sided Coarse/Fine

    Norton Crystalon Bench Stone, Dual-Sided Coarse/Fine

    Norton's Crystalon bench stones are made from premium silicon carbide for fast stock removal with minimal loading. At a full 8'' long, this model provides plenty of room for a long lapping stroke. Applications include restoring the cutting edges on straight-edges tools such as chisels and plane…

    $39.99
  3. Micro-Mesh™ Cushioned Abrasives

    Micro-Mesh™ Cushioned Abrasives

    …possible finish on your projects with ultra fine grit cushioned abrasives. With a flexible cloth back and resilient inner layer, micron-graded silicone carbide crystals recede to an even planing level as they establish each successively finer scratch pattern. Available in 5" disk assortment pack…

    From: $26.29
  4. Blade Tuning Stone

    Blade Tuning Stone

    Blades run smoother and last longer! This stone rounds out the back of your bandsaw blades, improving their performance. Silicon-carbide material never needs oiling. Recommended by band saw expert Mark Duginske!

    1 Review(s)
    $16.39
  5. Micro-Mesh Cushioned Abrasives

    Micro-Mesh Cushioned Abrasives

    …and fewer steps. Conforms to the shape while providing even pressure against the surface. Backed with a flexible cloth, large micron-graded silicone carbide crystals recede to an even planing level as they establish each successively finer scratch pattern.* Using water as a lubricant is encouraged…

    7 Review(s)
    From: $18.99
  6. Norton Flattening Stone

    Norton Flattening Stone

    …develops in waterstones over time and exposes a fresh cutting face for faster, more effective sharpening. This stone features coarse-grit silicon carbide that cuts quickly, and deep diagonal grooves that allow waste material to easily escape. For waterstones only. Measures 9" x 3" x 3/4". * Comes…

    6 Review(s)
    $37.49
  7. Platin 2 Abrasives for Festool RO 150 FEQ

    Platin 2 Abrasives for Festool RO 150 FEQ

    …be shipped within the Continental United States. Compatible with Festool ETS 150, RO 150, LEX 150 and other 6-inch sanders. A foam-backed, silicone carbide based abrasive with a stearate coating, Platin 2 was specially developed for high-gloss finishes on closed surface materials such as solid…

    $67.00
  8. Scroll Saw Sanding File

    Scroll Saw Sanding File

    Silicon carbide abrasive is aggressive enough to cut as well as sand in most materials. Shape and sand complex contours and forms, eliminating the need for tedious hand sanding. Each package contains two files. Technical Details:* Pinless file measures 5" long.* Spring steel with silicon

    1 Review(s)
    $8.29
  9. 6000-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

    6000-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

    Pack of six 6000-grit silicon carbide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for honing applications. Similar to honing with a leather strop. Highly conformable to hone gut hooks and serrated edges. Very cool cutting for the most delicate…

    $9.95
  10. Platin 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ

    Platin 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ

    Compatible with Festool ETS 150, RO 150, LEX 150 and other 6-inch sanders. A foam-backed, silicone carbide based abrasive with a stearate coating, Platin 2 was specially developed for high-gloss finishes on closed surface materials such as solid surface, plastics and fiberglass, as well as fillers…

    $67.00
  11. Norton® Blaze Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Extra Coarse

    Norton® Blaze Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Extra Coarse

    …parting lines and flashing. Norton Blaze discs features ceramic aluminia grain, which boasts twice the cut rate and twice the lifespan of silicon carbide. Both the face and edge of the wheel can be used. * Use with an angle grinder for removal of paint, rust, coatings, light edge burrs, parting…

    $19.99
  12. 3 Piece Waterstone Sharpening Set

    3 Piece Waterstone Sharpening Set

    …a polished edge.* The Nagura Stone forms a paste on finer grit waterstones to speed and enhance polishing. Use with the 6000 grit stone.* These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet-dry abrasive sheet.

    9 Review(s)
    $74.59
  13. Combination Waterstones

    Combination Waterstones

    …the 6000 grit stone. * These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet - dry abrasive sheet.* Waterstone Holder: For non-slip sharpening. The arms are made from chrome plated steel that resists rusting. Holder…

    4 Review(s)
    From: $26.79
  14. Grinding Wheel Dressing Stick

    Grinding Wheel Dressing Stick

    …a faster cut, or slowly to achieve the finest polish. Technical Details:* The Norton Grinding Wheel Dressing Stick measures 1" x 1" x 6".* Silicon Carbide, Medium abrasive.* Dressing sticks are used for truing and dressing bench and pedestal grinding wheels. * Holding the abrasive stick on the…

    $10.99
  15. Olson® All Pro™ Band Saw Blades-93-1/2" (fits most 14"  Delta Jet etc.)

    Olson® All Pro™ Band Saw Blades-93-1/2" (fits most 14" Delta Jet etc.)

    …Pro™ features a hard back that can travel up to 6,000 SFM. The exclusive material (steel enriched with tungsten, chrome, and silicon, plus pinpoint carbides) offers strength and durability. Made in the U.S.A. by Olson Saw Company. Not sure about which tooth pattern to get? Skip, Hook or…

    21 Review(s)
    From: $19.49
  16. Olson® All Pro™ Band Saw Blades   105" (fit most 14" band saws with risers)

    Olson® All Pro™ Band Saw Blades 105" (fit most 14" band saws with risers)

    …Pro™ features a hard back that can travel up to 6,000 SFM. The exclusive material (steel enriched with tungsten, chrome, and silicon, plus pinpoint carbides) offers strength and durability. Made in the U.S.A. by Olson Saw Company. Not sure about which tooth pattern to get? Skip, Hook or…

    21 Review(s)
    From: $20.99
  17. Olson® All Pro™ Band Saw Blades-123" fits JET 16" band saws

    Olson® All Pro™ Band Saw Blades-123" fits JET 16" band saws

    …Pro™ features a hard back that can travel up to 6,000 SFM. The exclusive material (steel enriched with tungsten, chrome, and silicon, plus pinpoint carbides) offers strength and durability. Made in the U.S.A. by Olson Saw Company. Not sure about which tooth pattern to get? Skip, Hook or…

    21 Review(s)
    From: $22.99
  18. Olson All Pro Band Saw Blades - Custom Sizes

    Olson All Pro Band Saw Blades - Custom Sizes

    …the narrow width blades. Resaw your lumber into thin boards or veneers with the wide blades. These blades contain pin-point carbides, molybdenum, nickel, chrome and silicon to ensure maximum durability and easy cutting. Blades are sold by the linear inch. Minimum length – 72". Maximum length…

    $0.39
  19. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …and 3/16" blades.* Fits 14" saws* All Pro blades have higher tensile strength than any other brand.* Blades contain pin-point carbides, molybdenum, nickel, chrome and silicon to ensure maximum durability and easy cutting.* Cuts a wide range of woods, plastic and non-ferrous metal.* Raker set clears…

    4 Review(s)
    $52.49
  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
Feedback X