Sliding Square

  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
  1. Magnetic Lock Combination Square

    Magnetic Lock Combination Square

    Six rare earth magnets hold the ruler in place instead of a clumsy screw lock. Body slides quickly and easily along the ruler through the magnetic lock. Heavy-duty cast zinc body is milled on all five sides for superior accuracy. 12" ruler is etched with markings to 1/16" and 1mm. Features onboard…

    3 Review(s)
    $20.99
  2. iGaging 6'' Precision Combo Square

    iGaging 6'' Precision Combo Square

    This deluxe square is perfect for precise measuring, layout and machine setups. Just slide the ruler to the end for a precision height gauge. The included center head easily locates the center of round stock, while the 45° miter face, bubble level and scratch awl ensure easy, accurate layout…

    5 Review(s)
    $39.99
  3. iGaging 4'' Precision Double Square

    iGaging 4'' Precision Double Square

    In addition to routine measuring and layout, this apron-size square is perfect for machine setups. Just slide the ruler to the end for a precision height gauge. Features 1/8" and 1/16" graduations on one side, while the flip-side has 1/32" and 1/64" graduations.

    19 Review(s)
    $19.99
  4. Digital Sliding T-Bevel Gauge

    Digital Sliding T-Bevel Gauge

    Take the guesswork out of angle measurement and duplication with this 2-in-1 Digital Sliding T-Bevel and Protractor! Features a large digital angle readout that gives you precise 360° measurements with an accuracy to 0.3° and .05° resolution and holds them while you transfer to stock.…

    5 Review(s)
    $36.99 $24.99

    SAVE 32%

  5. Drawer Sides-Select Size

    Drawer Sides-Select Size

    …Size is 1/2" thick and have a 1/4" dado for the drawer bottom located 1/4" from the bottom edge.* Simply cut to length and assemble with your drawer front.* Available in 4 foot lengths.* Sizes listed are width. Click here to see our exclusive Clamp-It Assembly Square, handy for assembling drawers.

    12 Review(s)
    From: $6.99
  6. Master Plate with Super Bar

    Master Plate with Super Bar

    …for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and more!

    10 Review(s)
    From: $49.99
  7. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  8. Picture Hanging Level

    Picture Hanging Level

    …energy, and frustration when mounting any object that has multiple connection points. Additional features:* One edge has a zero center point for symmetrical mounting* Four integral slides move smoothly for quick and easy marking* Hangs up easily for simple storage* Lifetime Replacement Guarantee

    11 Review(s)
    $41.99
  9. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    New and Improved! Now with lower profile and wider jaw for more stability! Wide lever handles and a click-lock sliding jaw make it simple to position and secure these clamps for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. A very low…

    89 Review(s)
    From: $41.99
  10. Laguna Tools Platinum Series Universal Sliding Table System

    Laguna Tools Platinum Series Universal Sliding Table System

    Do you need to square sheet stock but don't have the space for a panel saw? Laguna Tools solves that problem with the Platinum Series Universal Sliding Table, a sliding table attachment that converts virtually any cabinet style table sawto give you the cutting capacity of a small panel saw!*…

    $695.00
  11. iGaging 9'' Ebony Sliding T-Bevel

    iGaging 9'' Ebony Sliding T-Bevel

    The sliding t-bevel is the tool of choice for transferring angles and laying out dovetails and angled joinery. This model is offered with a beautiful ebony handle and solid brass wear strips for durability and a stable reference surface. 9" blade pivots and slides, and is locked in place with a…

    $37.99
  12. 45°-90°-45° Saddle Square and Miter

    45°-90°-45° Saddle Square and Miter

    Slide this solid aluminum gauge up and down your workpiece for fast and accurate miter layout. Its trapezoidal face lets you scribe perfect 45° lines in both directions without having to flip thetool! Additional features:* Great for marking and angle checking* Interior window makes marking…

    1 Review(s)
    $26.99
  13. Slide Mounting Screws

    Slide Mounting Screws

    Slide mounting screws for attaching ball bearing slides and catches (roller and magnetic) have low profile heads that won't interfere with guide operation.* Thread design gives you substantial holding power in the mating material.* #2 Square-X drive.* Can also be used to attach brackets, shelf…

    4 Review(s)
    $5.19
  14. 90-lb. Self-Closing Over-Travel  Drawer Slide -  Accuride 3834 (22")

    90-lb. Self-Closing Over-Travel Drawer Slide - Accuride 3834 (22")

    …Closing action starts when the drawer is within 1-1/4" to 2" of the closed position.* Tension keeps the drawer from bouncing back out, and ensures that the drawer fronts are square and aligned!* Load-rated to 90 lbs. NOTE: We MAY NOT carry all sizes listed on the Accuride Product Information Sheet.

    $34.99
  15. 75-lb. Comfort-Close Over-Travel Drawer Slides - Centerline® 757CC (14" to 22")

    75-lb. Comfort-Close Over-Travel Drawer Slides - Centerline® 757CC (14" to 22")

    …shut during the final 1-1/2" of travel. These over travel slides also feature convenient lever disconnect and impeccable construction. Note: These slides have very tight tolerances and require that the drawer box be square and the slides be parallel. If this attention to detail is not followed you…

    1 Review(s)
    From: $17.99
  16. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …36" and 50") PLUS an accessory set of wide jaws for fast, accurate squaring of the clamp guides. You can attach your own wooden cauls to the squaring jaws in whatever length you need to achieve even more accurate squaring. The All-in-One Clamp Guides are rigid, lightweight, and boast zero-deflection…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  17. FastCap® SquareNTape™

    FastCap® SquareNTape™

    …in USA. Technical Details:* Eliminates the need for a builder's square or chalk box* 90° squared edge lets you lay SquareNTape™ across a board for 90° squaring capabilities* Squared edge also lets you mark and slide using notches at 1-1/2" and 3-1/2" - ideal for marking door and window…

    1 Review(s)
    $5.99
  18. Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence

    Laguna Platinum Series Tablesaw Left-tilt w/ T-square Fence

    This could very well be the last table saw you'll ever need to buy. It has the power, the accuracy, and the legendary quality of a Laguna Tool product! Features a powerful 3HP TEFC motor and a precision ground table top made of premium grade cast iron, heat treated and ground to mirror-like flat…

    1 Review(s)
    $1,995.00
  19. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    …dovetails.Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge…

    3 Review(s)
    $269.00
  20. Leigh Super 18'' Dovetail Jig

    Leigh Super 18'' Dovetail Jig

    …dovetails. Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge…

    3 Review(s)
    $389.00
  21. Leigh Super 24'' Dovetail Jig

    Leigh Super 24'' Dovetail Jig

    …dovetails. Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge…

    1 Review(s)
    $479.00
  22. Jet® 10'' Jobsite Table Saw w/Retractable Stand

    Jet® 10'' Jobsite Table Saw w/Retractable Stand

    …a square fence and sliding precision * Rear extension provides out feed support and keeps the work piece flat * New riving knife system complies with UL standards and prevents kickback * Convenient push button arbor lock allows for easy and quick blade change * Quick-lock fence slides smoothly…

    1 Review(s)
    $669.99
  23. Kreg Precision Router Table System

    Kreg Precision Router Table System

    Much like the rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two…

    1 Review(s)
    $499.00
  24. Kreg® Klamp Table KKS1000

    Kreg® Klamp Table KKS1000

    Get perfectly flush pocket hole joints and square frames with this innovative assembly table. Simply slide your parts against the stops, clamp in place and drive your screws! Aluminum Klamp Trak features a channel that accepts sliding Klamp Block stops and Bench Klamps (Klamp Table includes 2 Bench…

    1 Review(s)
    $249.00
  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
Feedback X