Sliding Cabinet Door Hardware

  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
  1. Euro Sliding Wood Door System

    Euro Sliding Wood Door System

    cabinet door mounting! * #39704 Sliding wood door hardware set consists of four running gears with clips, two guides and two stoppers. Top Rail Set (37461) sold separately. * Sliding gear is non-removable once attached to the door. * Designed for 5/8" and 3/4" door thicknesses. * Minimum cabinet top…

    2 Review(s)
    From: $24.99
  2. EZ Pocket Door System-Pocket Door Slide

    EZ Pocket Door System-Pocket Door Slide

    …when sliding raised panel doors into cabinets. Specifications:* Maximum door weight: 30 pounds.* Maximum door dimension: 24" wide x 42" tall* Slide width: 0.46"* Slide travel (12-16" slides): Approximately 3" less than slide length.* Slide travel (18-24" slides): Approximately 4" less than slide

    5 Review(s)
    From: $50.99
  3. Hardwood Track and Upper Guide

    Hardwood Track and Upper Guide

    Use for 1/4" sliding cabinet doors made from plywood, hardwood, glass or pegboard. * Track stains easily to match your woodwork.* 5' lengths.* 1-1/8" wide.* Hard Maple.

    3 Review(s)
    $31.49
  4. E-Z Glide Tracks-Aluminum

    E-Z Glide Tracks-Aluminum

    Give a cabinet a dramatic look with sliding glass doors! These E-Z tracks make it possible, with dual channels for a pair of 1/4" glass doors. Includes an aluminum upper glide, shoe, track, and nylon rollers for a smooth, glide when opening or closing. Choose from Bronze or Aluminum to match the…

    6 Review(s)
    From: $41.99
  5. Sliding Door Slide Pins

    Sliding Door Slide Pins

    These sliding pins run along a kerf inside your cabinet for an easy-to-make sliding door. Just install pins to the door as shown. Use Nylo Tape, to create extra smooth sliding action when placed between the door and bottom panel (either attached to bottom edge of door or on top of bottom panel).*…

    1 Review(s)
    $4.59
  6. Tambour Door Hardware Kits-Select wood

    Tambour Door Hardware Kits-Select wood

    Tambour Door hardware kits create handsome appliance storage bins in your kitchen. Tambour door slides effortlessly in its track. Kit includes hardwood tambour with a fabric backing, spring tension adjustment for full control of tambour door movement, a wooden hand pull and a face frame mounting…

    3 Review(s)
    $76.99
  7. Barrister Bookcase Door Slides

    Barrister Bookcase Door Slides

    …mounting hardware.* Both door member and cabinet member have rollers that double as hinging mechanisms.* To remove the door, it must be able to swing inside the cabinet. Use only removeable catches/door stops.* Minimum cabinet depth for 9" slide: 10"* Minimum cabinet depth for 14-1/2" slide:

    14 Review(s)
    $37.99 From: $17.99

    SAVE 53%

  8. KV8091 Slides & Full Overlay Pocket Door System-Pocket Door Slides

    KV8091 Slides & Full Overlay Pocket Door System-Pocket Door Slides

    …alignment and installation.* Mounts directly to cabinet side.* Minimum stile width of door is 2-1/2".* Side space requirements: min. 1-3/4" if doors are 3/4" stock; max. 2-1/4" if doors are 1-1/4" stock.* Travel distance is slide length less 4".* Max. door dimensions: 72" high x 26" wide.* All have…

    4 Review(s)
    From: $93.49
  9. Aluminum Cabinet Door Frames-Aluminum Frame Material

    Aluminum Cabinet Door Frames-Aluminum Frame Material

    …assemble a glass or panel cabinet door in any size! Choose from three aluminum frame profiles: Narrow, Wide and Curved. All three profiles come in Satin aluminum finish. * Simply cut the frame ends with a 45° miter, slide the corner connectors into the ends and slide the hinges (Sold Separately)…

    From: $5.99
  10. Medium Duty Flipper Door Slides

    Medium Duty Flipper Door Slides

    …25 lb. door. Slide and door require 1-3/4" of side space. Minimum cabinet depth must equal slide length plus 3/4" door thickness. The door travel will equal length of slide less 4-1/2" . Choose the length of slide you need and one Inset 35mm Hinge Set (#40361 - Sold Separately) per door. Hinge sets…

    5 Review(s)
    From: $36.99
  11. E-Z Glide Tracks-Bronze

    E-Z Glide Tracks-Bronze

    Give a cabinet a dramatic look with sliding glass doors! These E-Z tracks make it possible, with dual channels for a pair of 1/4" glass doors. Includes an aluminum upper glide, shoe, track, and nylon rollers for a smooth, glide when opening or closing. Choose from Bronze or Aluminum to match the…

    5 Review(s)
    From: $57.79
  12. Rev-a-Shelf Pullout Organizer w/Stainless Steel Panel for Base Cabinets 444 Series

    Rev-a-Shelf Pullout Organizer w/Stainless Steel Panel for Base Cabinets 444 Series

    …patented door mount brackets that allow up to 5 inches of flexibility for trouble-free installation on any door style. Patent pending "tri-slides" minimize any side-to-side motion and provide complete stability when pulled out of the cabinet. Pullout organizers for wall cabinets are also…

    $247.99
  13. Base Cabinet Pullout Organizers, Rev-a-Shelf 448 Series-Pullout Organizers

    Base Cabinet Pullout Organizers, Rev-a-Shelf 448 Series-Pullout Organizers

    cabinet. Designed for 9", 12" and 15" full height face frame base cabinets, and 9" full height frameless cabinets. Each unit contains: 1 Pull-Out Shelving System, 3 Adjustable Shelves with Chrome Rails, 150# Weight-Rated, Full-Extension Tri-Slides, Rub Bushings. NOTE: Full height door base cabinet

    2 Review(s)
    From: $104.99
  14. Accuride Face Frame Brackets For series 3832, 3834 and 3864 Slides

    Accuride Face Frame Brackets For series 3832, 3834 and 3864 Slides

    Mount to front and back of Accuride slides for easy installation of Accuride drawer slides on face frame cabinets. (Not required for frameless or European style cabinetry.) These brackets are designed for Accuride series 3832, 3834 and 3864 slides. Pack includes two front brackets and two rear…

    $6.09
  15. Chefs Complete Roll Out Pantry System, Rev-a-Shelf 5222 Series

    Chefs Complete Roll Out Pantry System, Rev-a-Shelf 5222 Series

    …tall cabinet application by Rev-a-Shelf. WOW! That's the general reaction from people introduced to the Chef's Roll-Out Pantry. This state-of-the-art organizer features a swing-out frame with 20 large interior chrome baskets, pivot/sliding hardware, 2 sets of door storage standards and 10 door mount…

    $2840.99
  16. Rev-a-Shelf Pullout Organizer w/Stainless Steel Panel for Wall Cabinets 444 Series

    Rev-a-Shelf Pullout Organizer w/Stainless Steel Panel for Wall Cabinets 444 Series

    …stability when pulled out of the cabinet, plus patented door mount brackets that allow up to 5 inches of flexibility for trouble-free installation on any door style. Technical Details:* 5" Wide Wood Base Cabinet Organizer designed for 30" tall wall cabinets* Comes fully assembled* Patented…

    $139.99
  17. Single Track Slide

    Single Track Slide

    Economical single track slides are ideal for both new projects and retro fitting. Designed for use on face frame cabinets, they feature a smooth roller action and support up to 50 lbs. The slides also allow drawers to be removed and have a positive stop mechanism that prevents drawers from…

    4 Review(s)
    $10.99
  18. Accuride Face Frame Brackets for 2132 Series Drawer Slides

    Accuride Face Frame Brackets for 2132 Series Drawer Slides

    Mount to front and back of Accuride slides for easy installation of Accuride drawer slides on face frame cabinets. (Not required for frameless or European style cabinetry.) These brackets are designed for Accuride series 2132 drawer slides. Pack includes two front brackets and two rear brackets,…

    $9.69
  19. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …unit with soft-close slides, full-depth shelf, half-depth shelf, vertical divider and hardware.* Shelf features removable metal rails to keep items from falling.* Simple installation-unit screws to floor of cabinet with 4 screws.* Can be installed behind a hinged door or the door can be mounted to…

    $219.99
  20. Inset Pocket/Flipper Door Hinge Kit

    Inset Pocket/Flipper Door Hinge Kit

    Pocket/flipper door hinges for inset doors (3/4" maximum thickness) on either frameless or face-frame cabinets. Can be used with slides in the EZ Pocket Door System for doors that weigh up to 30 lbs. and are a maximum of 42" tall x 24" wide or with slides in the KV8091 Pocket Door System for doors

    $25.19
  21. Bypass Door Lock

    Bypass Door Lock

    This push bolt style lock is for use on sliding doors.* The shaft length is 7/8" and expands outward to 1-1/4" when unlocked.* The lock plunger extends outward 5/16" when locked.* Cylinder requires a 3/4" diameter hole.* Exposed face of lock is finished.* Keyed alike.* Two keys provided.

    $16.99
  22. Thick Inset Pocket/Flipper Door Hinge Kit

    Thick Inset Pocket/Flipper Door Hinge Kit

    Pocket/flipper door hinges for thick inset doors (1-1/4" maximum thickness) on frameless or face-frame cabinets. Can be used with slides in the EZ Pocket Door System for doors that weigh up to 30 lbs. and are a maximum of 42" tall x 24" wide or with slides in the KV8091 Pocket Door System for doors

    $32.59
  23. Metafile

    Metafile

    Metafile converts any drawer into a filing cabinet. Just install Blum's Metafile in a spare drawer to create a functional filing system in minutes. * Installation requires no special machining.* May be used with both Pendaflex letter and legal folders.

    4 Review(s)
    $24.99
  24. File Drawer Systems, Rev-a-Shelf RAS-FD

    File Drawer Systems, Rev-a-Shelf RAS-FD

    Turn your standard height drawer/door cabinet into a two-tier file drawer with Rev-a-Shelf's file drawer kit. This unique kit features full-extension ball bearing slides and heavy-duty chrome plated rails. * Bottom, side and rear mounting for total stability* Both tiers operate independently * Holds…

    $61.99
  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X