Sliding Shelf Hardware

  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
  1. 100-lb. Full Extension Shelf Slides - Centerline® 757A (16" to 24")

    100-lb. Full Extension Shelf Slides - Centerline® 757A (16" to 24")

    Designed for pull-out shelves and low-profile drawers. Features a tab that shelf or drawer rests on for easy installation. Perfect for kitchen pullouts or entertainment center shelving. Full-extension travel provides sufficient access, while the 100-lb. load rating supports most applications.…

    1 Review(s)
    From: $19.99
  2. Floor-Mounted Drawer Slides with Metal Sides

    Floor-Mounted Drawer Slides with Metal Sides

    …rollout shelf with these heavy duty slides. Each slide creates a 2-5/8" tall side panel — just add a front, back and bottom and you're done! Enjoy pull-out access to waste containers, convenient storage for cleaning supplies andfull-utilization of your cabinet space. Length of slide determines…

    4 Review(s)
    From: $24.99
  3. Birch Pullout Shelf Kit for Kitchen or Bath

    Birch Pullout Shelf Kit for Kitchen or Bath

    slides and cut your shelving. Includes hardware and instructions for one shelf. Note: If the shelf is cut to 15" wide or less, with an optional second set of slides (sold separately) you can build a second shelf.* Use leftover pieces from Kit 29847 plus Slide Kit 32814 to build an additional shelf.

    58 Review(s)
    $79.99
  4. 1-1/4" QuikTray Rollout Shelf Systems

    1-1/4" QuikTray Rollout Shelf Systems

    …Rollout Shelf System is all of the above. Since your drawer slides connect to the vertical supports using "hook dowels" rather than screws, they can be adjusted for height in seconds without tools. For undermount slides, T-508 hook dowels are needed (Sold Separately). For side mount slides, T-506…

    1 Review(s)
    $19.99
  5. Rev-A-Shelf Waste and Recycling Container Pullouts   Single Bin

    Rev-A-Shelf Waste and Recycling Container Pullouts Single Bin

    These 35-quart single-container pullouts from Rev-A-Shelf feature a heavy-duty wire frame construction and full-extension Accuride ball-bearing slides with a 100-pound weight rating for easy, quiet movement. Bottom mounting makes installation simple. Minimum cabinet opening: 19-1/2" H x 10-3/4" W x…

    From: $59.99
  6. Drawer Slide/Hardware Kits for Pullout Shelf Kit

    Drawer Slide/Hardware Kits for Pullout Shelf Kit

    Sufficient components are included in the kit to make two rolling shelves (if both are cut to 15" wide or less) when used with the Birch Pullout Shelf Kits (sold separately). The 22" Kit with the 22" Birch Pullout Kit (29847). The kit includes one pair of standard guides,two side panels, a bag of…

    $46.79
  7. Rockler Rolling Utility Ladder - Track Hardware, Zinc

    Rockler Rolling Utility Ladder - Track Hardware, Zinc

    …your guide for ordering. Utility Ladder 6' Track (47579): * Durable 6' cut-to-fit ladder track provides a sturdy sliding rail for your Utility Ladder.* Attach the track to your wall or shelf using Track Brackets (46973, sold separately). A narrow slot in the tube allows you to attach a Track Bracket…

    From: $7.99
  8. Variable Height Keyboard Slides with Shelf Tabs-Keyboard Slides

    Variable Height Keyboard Slides with Shelf Tabs-Keyboard Slides

    Two shelf tabs on each slide make mounting trays easier. Variable height brackets and smooth, ball-bearing movement suit these slides for a wide variety of keyboard applications. With height adjustability ranging from 2-11/32" to 3-11/16" (in 7/32" increments),these slides accommodate nearly all…

    4 Review(s)
    From: $36.29
  9. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    …functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only 4 screws* Limited Lifetime Warranty DETAILS PER SKU: 1001845* Dimensions:…

    $62.99
  10. Accuride Shelf Standard Slide Brackets

    Accuride Shelf Standard Slide Brackets

    …these shelf standard slide brackets-plus you can change the spacing of drawers without completely starting over!the Accuride slide brackets work with any of the Accuride slides from the 2132, 3832, 3834 and 2632 series, Rockler 766 and 757 series, Shop Basics GS757 series and Blum slides. These…

    5 Review(s)
    $14.99
  11. Wall Cabinet Wood Pullout Organizers, Rev-a-Shelf 448 Series

    Wall Cabinet Wood Pullout Organizers, Rev-a-Shelf 448 Series

    …up to five surface areas by utilizing the top of the unit to provide another shelf for taller 36" or 42" applications* Adjustable 3 Shelf Wall Cabinet Organizer* Ball-bearing tri-slide system and door mounting hardware* Door mount brackets offer up to 5" of adjustability* Wood unit comes fully…

    From: $92.49
  12. Blind Corner Wire Pullouts, Rev-a-Shelf 5207 Series

    Blind Corner Wire Pullouts, Rev-a-Shelf 5207 Series

    …the blind corner to your fingertips! Rev-a-Shelf's Premiere Blind Corner System contains door mounting hardware for left or right hand applications, exceptionally designed slide and pivot hardware, along with heavy gauge chrome plated baskets. DETAILS PER SKU: 5207-CR* Dimensions: 34"W x 23.25-28"H…

    $862.99
  13. Rev-A-Shelf Filler Pullout Organizer w/Adjustable Shelves for Base Cabinets (432-BF Series)

    Rev-A-Shelf Filler Pullout Organizer w/Adjustable Shelves for Base Cabinets (432-BF Series)

    …Series is available for base cabinet applications and features adjustable shelves with chrome rails and full extension ball bearing slides. Rev-A-Shelf's unique slide design provides the most stable function on the market. Please see additional filler pullouts for wall cabinets, tall cabinets, and…

    1 Review(s)
    From: $109.99
  14. Home Bar Plan

    Home Bar Plan

    …railing hardware used by the most stylish bars and restaurants (see hardware sold separately below). Bar Mirror Plan Requires:* 2 each - Door Pulls - Brass Finish - 3"* 2 each - Drawer Knobs - Brass Finish - 1-1/2"* 2 Pair - Drawer Slides - Full or 3/4 Extension* 8 each - 1/4" Shelf Pins* 2 pair…

    $15.79
  15. Sliding Susan® Pullout Drawer

    Sliding Susan® Pullout Drawer

    …Features English dovetail-joint construction and 3/4 extension drawer guides. Includes one (1) drawer. Easy to install: 1) set base 1/4" from front cabinet edge; 2) tighten four pre-drilled screws into cabinet base or shelf; 3) insert the Sliding Susan in the cabinet guides and you are done!

    25 Review(s)
    $64.99
  16. Pullout Hamper w/Polymer Basket, Rev-a-Shelf HURV Series

    Pullout Hamper w/Polymer Basket, Rev-a-Shelf HURV Series

    …wire frame, full-extension slides and easy installation with just four screws. * Specifications: 14-3/8"W 18-1/8"D 11-7/8"H* Cabinet opening required: 14-1/4"W 18"D 11-7/8"H* White polymer hamper/utility basket* Features Accuride full-extension ball-bearing slides* Optional Door Mount Kit available…

    From: $17.99
  17. Shelf Bracket/Slide Kit

    Shelf Bracket/Slide Kit

    Create sliding shelves or drawers in closets, kitchens, or almost any place you want. Installation is easy in new as well as existing cabinets. Adjustable in 1/2" increments to allow for maximum use of space. Kit includes four 24" white shelf standards, 2 sets of 22" Blum white epoxy drawer slides

    1 Review(s)
    $59.99
  18. Pullout Hamper w/Wire Basket, Rev-a-Shelf HRV Series-Pullout Laundry Hamper: 14-3/4" Tall

    Pullout Hamper w/Wire Basket, Rev-a-Shelf HRV Series-Pullout Laundry Hamper: 14-3/4" Tall

    Get easy access to your laundry with this Pull Out Wire Hamper from Rev-A- Shelf. Full extension, 18" ball-bearing slides provide smooth rolling, even when loaded down with heavy laundry. Sturdy, lightweight basket detaches from the frame for easy transport. Includes brackets and screws for easy…

    From: $17.99
  19. Blind Shelf Supports

    Blind Shelf Supports

    This sturdy, metal hardware slides inside the shelf so it's completely invisible ensuring that the alloy steel coupling screws remain tensioned between the posts and inserts in the plates. The Blind Shelf Supports yield a respectable capacity of 100 lb for a 4" deep shelf and up to 50 lb at 8" deep.…

    10 Review(s)
    $19.49
  20. Pullout Shelf Corner Guards

    Pullout Shelf Corner Guards

    Install these durable plastic corner guards on pullout shelves to protect cabinet doors from scratches and gouges caused by sharp corners. Mounting screws are included.

    6 Review(s)
    $3.99
  21. FlipWorks™ Multimedia Storage Trays

    FlipWorks™ Multimedia Storage Trays

    …Three-row tray dimensions: 16.43" deep, 18.42" wide, 1.60" thick. Opening width requirements: 18.89" for surface mounting; subtract 1/4" for side mounting. Includes:* Media Tray* 16" Slides (1 pair)* Surface Mount Brackets* Shelf Stabilizing "L" Bracket (x2)* Mounting Screws* Instructions/Template

    15 Review(s)
    From: $21.99
  22. Double Aluminum Pullout Waste Containers, Rev-a-Shelf 5349 Series

    Double Aluminum Pullout Waste Containers, Rev-a-Shelf 5349 Series

    Slide Extension: Full* Slide Length: 22"* Slide Finish: Brushed Aluminum1001690* Dimensions: 14.813"W x 22.938"H x 22.125"D* Min. Cab. Opening: 15.75"W x 23.25"H x 22.625"D* Slide Type: Ball-Bearing* Slide Closing: Self* Slide Mounting: Bottom Mount* Slide Extension: Full* Slide Length: 22"* Slide

    From: $244.99
  23. Pullout Quad Aluminum Recycle Center, Rev-a-Shelf 5349-9WM Series-Complete Pullout Recycling System

    Pullout Quad Aluminum Recycle Center, Rev-a-Shelf 5349-9WM Series-Complete Pullout Recycling System

    …full-extension soft close ball-bearing slides* Door mount kit included to mount cabinet door to waste container* Removable containers for easy cleaning underneath* Ball-bearing slides* Self-closing slides* Bottom mounts* Full slide extension* Slide Length: 22"* Brushed aluminum finish* 18-qt.…

    $359.99
  24. Two-Tier Cookware Organizer

    Two-Tier Cookware Organizer

    …bearing slides. This attractive, quiet-operating organizer is designed for Base 15 cabinets and requires an 11-1/2" wide (minimum) opening for installation.Additional features: * Measures 11-3/4" W x 22" D x 18" H * Includes two racks (with dividers), four slides and mounting hardware.* Designed…

    $89.99
  • Items 1 - 24 of 107
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X