Small Router

  • Items 1 - 24 of 51
  • Page:
    1. 1
    2. 2
    3. 3
  1. DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    small applications like routing round overs, chamfers, and small dadoes in your shop or at the job site. Sets up quickly yet it's just as easy to detach your router from the table without tools. Use your router with the included 1/4'' thick acrylic base to do freehand work like a standard router.

    $273.48
  2. Rockler Trim Router Circle Jig

    Rockler Trim Router Circle Jig

    Router Circle Jig allows you to use the new crop of compact, plunge-style trim routers to cut circles from 6" to 36" in diameter! Compact and lightweight, it's the ideal jig to use in small shops or on the jobsite. It sets up in minutes, and is predrilled to mount to popular trim routers

    $36.99
  3. Small Router Bit Case

    Small Router Bit Case

    Solid wood cases firmly hold 1/4" and 1/2" shanked router bits for easy carrying and convenient storage. Small router bit case is ideal for storing different categories of bits, including straight, roundover, raised panel door and specialty bits. With rubber feet on bottom for standing. Holds 20…

    4 Review(s)
    $36.99
  4. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    21 Review(s)
    $2,899.99
  5. Rockler French Traditional Router Bit - 1-1/2" Dia x 1-11/16" H x 1/2" Shank

    Rockler French Traditional Router Bit - 1-1/2" Dia x 1-11/16" H x 1/2" Shank

    With 1-11/16" of carbide height, this bit turns out attractive small- to medium-sized crown moldings, window and door casings, picture frames, and chair rails. The bit features two flutes and a 1/2" ball bearing guide.

    $49.99
  6. Small Piece Holder for Router Tables

    Small Piece Holder for Router Tables

    Get an extra margin of safety and control when working with small pieces.* Holds work pieces up to 10" wide and cuts at any angle up to 45&deg.* Ideal for use with table saw or router table.* Features a quick release for extra-fast clamping action.

    17 Review(s)
    $25.99
  7. Rockler Router Lift FX

    Rockler Router Lift FX

    …from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized routers. * The Router Lift FX Plus accepts the following routers: Porter-Cable…

    41 Review(s)
    $199.99
  8. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    …balance support for small stock and straight-line ripping. Great add-on for working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock.…

    7 Review(s)
    $79.99
  9. Rockler Trim Router Table

    Rockler Trim Router Table

    …for small applications like routing round-overs, chamfers and small dadoes in your shop or at the job site. Sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router with the included 1/4" thick acrylic base to do freehand work like a standard router.

    9 Review(s)
    $59.99
  10. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! No need to strain your back lifting and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various…

    5 Review(s)
    $49.99
  11. Router Raizer

    Router Raizer

    …and underside of your router table. Router plate shown not included. With the Router Raizer no special insert is required (or included) - use any router plate from 3/16" to 1/2" thick will do the trick! Height adjustments are made with a speed wrench that fits through a small hole drilled through…

    15 Review(s)
    $104.99
  12. Router Bit Tray

    Router Bit Tray

    Organize and store up to fifty router bits in this quality tray for drawers, shop made cases or use as a replacement tray for our Small Router Bit Case (sold separately, sku: 60588). * Twenty holes for 1/4" shank bits* Thirty holes for 1/2" shank bits* 6" x 12" x 1-1/2"* Made of hard foam

    3 Review(s)
    $10.99
  13. Rockler Train Track Router Bits

    Rockler Train Track Router Bits

    These carbide-tipped bits let you create classic wooden toy train tracks, similar to the expensive store-bought track. Cut enough track and the bits will pay for themselves, but the funnest part is getting creative and inventing track elements that nobody has ever seen before! Interesting…

    6 Review(s)
    From: $19.99
  14. Rockler Classic Cove Router Bits - 1/2" Shank

    Rockler Classic Cove Router Bits - 1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  15. VRS Vacuum and Router Support for the Leigh Dovetail Jigs

    VRS Vacuum and Router Support for the Leigh Dovetail Jigs

    …D1600. Standard Equipment:* Router Support Beam* Vacuum chute* Hose adaptor small* Hose adaptor large* Support rails* Finger assembly support brackets where required* Screws & washers* Hex keyFeatures:* Full width router support* Vacuum box glides effortlessly under router support beam* Control arms…

    7 Review(s)
    $84.00 From: $63.00

    SAVE 25%

  16. Rockler Miniature Round Over Router Bits - 1/4" Shank

    Rockler Miniature Round Over Router Bits - 1/4" Shank

    Rockler Miniature Round Over Router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! With its undersized 8mm bearing, these round over bits dips nimbly in and out of corners, virtually eliminating the widely arcing, shallow-cut corners that…

    $19.99
  17. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    …creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. * Use…

    2 Review(s)
    From: $104.47
  18. Freud® Canoe Joint Router Bits - 1/2" Shank

    Freud® Canoe Joint Router Bits - 1/2" Shank

    …Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as table-mounted portable routers.

    From: $49.97
  19. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    …panels for doors and paneling, as well as for beveling decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish.* Use 1/2" height…

    1 Review(s)
    From: $98.97
  20. Bill Hylton's Ultimate Guide to the Router Table, Book

    Bill Hylton's Ultimate Guide to the Router Table, Book

    …or building the best router table for your shop (with enclosed plans)* * Accurately checking and adjusting your basic tabletop setup, bench, bits, fence and feed direction* * Making perfect cuts for joinery and profile cuts* * Staging cuts, dealing with dust, working small parts with templates*…

    1 Review(s)
    $24.99
  21. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  22. Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    Rockler Beadlock® Tenon Router Bit - 3/8" Dia x 1-3/4" H x 1/2" Shank

    …vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours! * 1/2" shank for minimal vibration.* Approximately 3-1/2" long overall.* Carbide length: about…

    1 Review(s)
    $51.99
  23. Rockler Miniature Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Rockler Miniature Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Using standard sized bits on small projects is like wearing shoes that are too big. Sometimes it works, but it just doesn't look right. Rockler miniature router Bits fill the need for appropriately sized bits for jewelry boxes, humidors, and other small boxes and crafts. They feature the same…

    1 Review(s)
    $19.99
  24. Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  • Items 1 - 24 of 51
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X