Sorby Turning Tools

  • Items 1 - 24 of 99
  • Page:
    1. 1
    2. 2
    3. 3
  1. Hollowing Tools SOV-RS for Sorby Sovereign Turning Tool System-Tools

    Hollowing Tools SOV-RS for Sorby Sovereign Turning Tool System-Tools

    Sorby's Multi-Tip Hollowing Tool (31747) and Hollowmaster (39659) combine to take you from start to finish in your hollowing projects. The Multi-Tip Hollowing Tool features a broad 3/4" flat surface in permanent contact with the tool rest, giving you maximum stability and control for anything from…

    1 Review(s)
    $68.99 From: $43.99

    SAVE 36%

  2. Robert Sorby 3-Piece Pen Turning Set

    Robert Sorby 3-Piece Pen Turning Set

    Create pens, lace bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! * Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemaster* Designed for use on a mini lathe or for work on smaller projects* Each tool has an overall length of 10"

    $89.99
  3. Rockler Carbide Mini Turning Tool 3-Piece Set

    Rockler Carbide Mini Turning Tool 3-Piece Set

    …between the different tools. * Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.* Square Carbide Mini Turning Tool is ideal for flat or convex…

    7 Review(s)
    $189.99 $119.99

    SAVE 37%

  4. Robert Sorby Spindle Gouges-Standard Spindle Gouges

    Robert Sorby Spindle Gouges-Standard Spindle Gouges

    Specifically produced for turners who understand the nuances of the craft, these are detailing tools used on between-center work, where the grain is running parallel to the bed bars. They are used to create coves, beads and other profiles on goblets, vases and egg cups.

    From: $46.99
  5. Robert Sorby Extra Heavy Duty Scraper

    Robert Sorby Extra Heavy Duty Scraper

    …and deep hollowing. Excellent for large bowl work, platters and deep hollowing. Massive in section, this scraper is designed to reduce vibration and be stable in use. Because of its sheer bulk, this scraper can be used with a large overhang from the tool rest. Blade: 1-1/2"(38mm) x 3/8"(10mm)

    1 Review(s)
    $139.99
  6. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    The Robert Sorby TurnMaster is a premium quality modular turning tool that accepts a variety of interchangeable cutters, allowing you to use a single tool for a wide variety of turning projects. The TurnMaster's solid 3/4" steel shank is flattened on the bottom for stability, and the patented…

    From: $108.99
  7. Robert Sorby Parting Tools

    Robert Sorby Parting Tools

    …sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets. Diamond Parting Tool - The special profile of this tool reduces the risk of binding…

    From: $54.49
  8. Thin Kerf Parting Tool, 1/16''

    Thin Kerf Parting Tool, 1/16''

    …cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated…

    2 Review(s)
    $35.99
  9. 6-Piece Sorby Turning Tool Set

    6-Piece Sorby Turning Tool Set

    Sorby turning sets at a great price. Contains all the essential tools for spindles and bowls, making it the perfect set for beginners and veterans alike. Highly polished flutes ensure a smooth finish, while precisely profiled edges provide the best possible cutting characterisics. Each Sorby tool is…

    $286.99
  10. Robert Sorby Swan Neck Hollowing Tools

    Robert Sorby Swan Neck Hollowing Tools

    Robert Sorby makes blind turning or undercutting where reach is restricted easier than ever with a Swan Neck Hollowing Tool. Choose from a 14", 20", and 24". Cutting tips may be resharpened when necessary. Ash handle. Made in England. Technical Details:* Makes blind turning or undercutting where…

    From: $69.99
  11. Robert Sorby Sovereign Ultima Hollowing Tool-Accessories

    Robert Sorby Sovereign Ultima Hollowing Tool-Accessories

    …smooth cut* Blade can be turned for long cutting life and is easily resharpened* Multiple adjustments give you just the cut you need * Part of the Robert Sorby Sovereign Ultima modular system that is used with the Interchangeable Handle (sold separately)* Small tool enables woodturners to produce…

    From: $22.99
  12. 3-Piece Robert Sorby Woodturning Set with DVD

    3-Piece Robert Sorby Woodturning Set with DVD

    …always mean a sacrifice in quality, and this Robert Sorby turning tool set proves it, offering an excellent turning set for those on a budget who still want the best. With three of the most versatile turning tools available - an 1/8" Parting Tool, a 3/8" Spindle Gouge, and a 3/4" Roughing Gouge -…

    $129.99
  13. Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    Designed specifically to fit the Robert Sorby TurnMaster system, these carbide cutters offer excellent durability and all-around turning performance. The cutters are disposable, which eliminates the time and expense of sharpening. Available in three profiles: round, square and detail point…

    $19.99
  14. Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    The Robert Sorby RS200KT is a multi-purpose turning tool that comes packaged with three replaceable cutters - two for hollowing, one for scraping. Of the two hollowing cutters, the one with the rounded end is designed for general roughing out and will create a flowing curve as in the bottom of a…

    5 Review(s)
    $102.99
  15. Robert Sorby Bedan

    Robert Sorby Bedan

    Used in the same way as the beading and parting tool. Used in the same way as the beading and parting tool, the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.

    $64.99
  16. Fingernail Spindle Gouges 840F for Sorby Sovereign Turning Tool System-Spindle Gouges for Sorby Sovereign System

    Fingernail Spindle Gouges 840F for Sorby Sovereign Turning Tool System-Spindle Gouges for Sorby Sovereign System

    Make your best spindles yet with these fine Sorby gouges. Use with the Sorby Sovereign Handle (sold separately) for precise control and rock-solid stability. Available in 3/8" and 1/2" sizes, both of which are compatible with the Sovereign handle and its collet adapters.

    From: $36.99
  17. Robert Sorby Hollowmaster

    Robert Sorby Hollowmaster

    Turn long thin vessels and vases through a narrow opening with ease and accuracy. The Robert Sorby Hollowmaster has a flat underside which provides exceptional control and stability when hollowing and is suitable for end grain and bowl work. It is supplied with two interchangeable tips for hollowing…

    1 Review(s)
    $101.99
  18. High Speed Steel Cutters for Robert Sorby TurnMaster System

    High Speed Steel Cutters for Robert Sorby TurnMaster System

    …to fit the Robert Sorby TurnMaster system, these highspeed steel cutters offer the sharpest possible edge for the finest finishingdetails on the lathe. The cutters are easily sharpened on standard sharpeningequipment. Available in a range of profiles to fit almost any turning application.Cutters…

    $12.99
  19. Fingernail Bowl Gouges 842F for Sorby Sovereign Turning System-Tools

    Fingernail Bowl Gouges 842F for Sorby Sovereign Turning System-Tools

    Make rounder, smoother bowls with these high quality Sorby gouges. Use with the Sorby Sovereign Handle (sold separately) for maximum control and stability. 3/8" and 1/2" gouges are both compatible with the Sovereign Handle and its included collet adapters.

    From: $46.99
  20. Robert Sorby Sovereign Ultima Hollowing Tool

    Robert Sorby Sovereign Ultima Hollowing Tool

    …smooth cut* Blade can be turned for long cutting life and is easily resharpened* Multiple adjustments give you just the cut you need * Part of the Robert Sorby Sovereign Ultima modular system that is used with the Interchangeable Handle (sold separately)* Small tool enables woodturners to produce…

    $186.99
  21. Robert Sorby ProEdge Plus Sharpening System

    Robert Sorby ProEdge Plus Sharpening System

    The Sorby ProEdge Plus does just what its name implies - puts a consistent, professional-quality edge on almost any hand tool, whether a turning tool, chisel, plane blade or knife. And don't be fooled by its compact size - weighing in at over 30 lbs, with a 1/4" steel plate, this is a true…

    1 Review(s)
    $524.99
  22. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    1 Review(s)
    $69.99
  23. Robert Sorby Spindlemaster-Spindlemaster

    Robert Sorby Spindlemaster-Spindlemaster

    It beads, coves, planes, trims end grain and much more!The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer.

    12 Review(s)
    From: $56.99
  24. Robert Sorby Oval Skew Chisel

    Robert Sorby Oval Skew Chisel

    A delicately balanced tool essential to the spindle turners kit. Delicately balanced tools that are the planes of the spindle turners kit. Designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth…

    From: $59.99
  • Items 1 - 24 of 99
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X