Spiral

  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
  1. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  2. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    …portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit (75-102)* Overall Diameter: 1/4"* Carbide Height: 1"* Shank Diameter: 1/4"* Overall Length: 2-1/2" Up-Cut Spiral Bit (75-104)* Overall Diameter:…

    $159.97
  3. Spiral Dowel Pins-Choose size

    Spiral Dowel Pins-Choose size

    A variety of spiral dowel pins with stronger joints due to greater distribution of glue. Made of hard maple. Chamfered ends. 50 per pack. Dimensions listed by diameter x length.

    12 Review(s)
    From: $2.99
  4. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided veneers and laminates. * Freud's solid carbide down spiral bits are ideal…

    3 Review(s)
    From: $50.97
  5. Onsrud Down-Cut Spiral Bits

    Onsrud Down-Cut Spiral Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  6. Spiral Pipe and Fittings for Dust Collection System-Pipes and Fittings

    Spiral Pipe and Fittings for Dust Collection System-Pipes and Fittings

    Safety, efficiency, and strength are coiled together in these superior dust collection pipes and fittings. All steel construction offers superior rigidity, minimizes static discharge, and adds strength. Pipe is made of 24 gauge steel. Fittings are constructed of 20 gauge steel.

    1 Review(s)
    From: $4.99
  7. Sorby Micro Spiraling Set, without Handle

    Sorby Micro Spiraling Set, without Handle

    For those who already own the Sorby Modular Handle. This removable spiraling attachment with two interchangeable cutters and an integral tool guide will take your small-scale turnings to a new level of craftsmanship.

    $64.99
  8. Universal Scroll Saw Spiral Blades

    Universal Scroll Saw Spiral Blades

    Ideal for 0° radius or fret work, spiral blades blades are twisted so teeth point outward in every direction. A 360° capacity allows cutting in any direction without turning your work. Recommended for all types of material including wood, plastic, non-ferrous metals, plaster, bone, etc. All…

    $6.29
  9. Robert Sorby Micro Spiraling Set

    Robert Sorby Micro Spiraling Set

    …Set, Spindle Set, and Hollowing Set fordetails.Complete Set includes:* Aluminum handle (5-3/4" long) * Micro Spiraling Tool (head and two cutters)* Fine Spiraling Cutter* Medium Spiraling Cutter* (2) allen wrenches* Instruction leaflet An additional Texturing Cutter is available separately for…

    2 Review(s)
    $73.99
  10. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    Upward spiral is perfect for ejecting chips from mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide…

    1 Review(s)
    From: $51.47
  11. Dowel Pin Assortment Kit

    Dowel Pin Assortment Kit

    You'll never be caught short with this assortment, which includes 500 hardwood spiral dowel pins from 1/4" through 1/2" diameter. Comes with a plastic storage box measuring 11-1/4" x 6-1/2" x 2-3/8".

    3 Review(s)
    $39.99
  12. Festool DOMINO® DF 500 Q Joiner with SYS 2 T-Loc Systainer

    Festool DOMINO® DF 500 Q Joiner with SYS 2 T-Loc Systainer

    …5, 6, 8, and 10 mm* Routing height adjuster with scale from 5 to 30 mm* Moveable stepped stops of 16, 20, 22, 25, 28, 36, and 40 mm* Patented spiral cutter rotates and oscillates to create perfect mortises* Hole width adjustment allows for easier alignment when joining panels* With fully adjustable…

    $850.00
  13. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  14. Powermatic® 15'' Planer w/Spiral Cutterhead & Digital Readout

    Powermatic® 15'' Planer w/Spiral Cutterhead & Digital Readout

    The spiral cutterhead on this planer provides smoother cutting and a finer finish than conventional knives. Three V-belts transfer maximum power from the 3HP motor to the cutterhead. Your workpiece will get substantial support from the precision ground cast iron table and two large extension wings.…

    $2344.99
  15. Festool HL 850 E Planer with New T-Loc Systainer

    Festool HL 850 E Planer with New T-Loc Systainer

    …rabbets of unlimited depth. Unique cutter head runs completely flush with the housing, allowing it to cut into corners with zero remaining lip. Spiral blade cuts on the skew at 10,000 RPM for more efficiency and an incredibly smooth finish. Every adjustment can be made without ever letting go of…

    1 Review(s)
    $615.00
  16. Spiral Clothes Rack, SHR Series

    Spiral Clothes Rack, SHR Series

    Spiral Clothes Rack for your closet corner. Break away from the ordinary with Rev-A-Shelf's Spiral Clothes Rack. This perfect corner closet solution has a 360-degree turning radius with an adjustable height of 72-1/2" to 84" and the ability to hang 40 single items of clothing from top to bottom.…

    $237.99
  17. Leigh Louver Spiral Upcut Bit

    Leigh Louver Spiral Upcut Bit

    1/4" high-speed steel (HSS) spiral upcut bit for use with the Leigh Louver Door Guide Set (33649, sold separately) on the Leigh FMT Frame Mortise and Tenon Jigs (sold separately). The 1/4" Louver bit has a 1/2" shank to stand up to the added forces of cross-grain routing. 3/4" cutter depth.

    $20.99
  18. Spiral Shelf Supports, Adjustable-1/4" Shelf Supports

    Spiral Shelf Supports, Adjustable-1/4" Shelf Supports

    Make uneven shelves a thing of the past! Shelves can be fine-tuned during or after installation with these spiral-shaped supports to ensure ideal height and level. Simply turn with a screwdriver to adjust any corner up to 4mm for a more perfect fit. 16 supports per pack. Works with 1/4" holes.

    5 Review(s)
    $4.19
  19. 2" X 50 Yard Spiral Foil Tape

    2" X 50 Yard Spiral Foil Tape

    Seal the pipe-to-fitting connections of the all-steel spiral-pipe dust collection system with this 2" wide foil tape. 50 yards.

    $19.99
  20. Spiral Shelf Supports, Adjustable-5MM Shelf Supports

    Spiral Shelf Supports, Adjustable-5MM Shelf Supports

    Make uneven shelves a thing of the past! Shelves can be fine-tuned during or after installation with these spiral-shaped supports to ensure ideal height and level. Simply turn with a screwdriver to adjust any corner up to 4mm for a more perfect fit. 16 supports per pack. Works with 5mm holes.

    5 Review(s)
    $4.19
  21. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  22. Robert Sorby Spiralling System

    Robert Sorby Spiralling System

    Robert Sorby Spiralling System allows you to create spirals on turned pieces. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which…

    $189.99
  23. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits…

    From: $20.47
  24. Freud Down-Spiral Router Bits - 1/4'' Shank

    Freud Down-Spiral Router Bits - 1/4'' Shank

    …The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2'' shank. Application: Grooves and dadoes in single-sided veneers and laminates.* Freud's solid carbide down spiral bits are ideal…

    From: $19.97
  • Items 1 - 24 of 60
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X