Spiral Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  2. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  3. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  4. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  5. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided veneers and laminates. * Freud's solid carbide down spiral bits are ideal…

    3 Review(s)
    From: $50.97
  6. Onsrud Down-Cut Spiral Bits

    Onsrud Down-Cut Spiral Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  7. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …outrigger bars, adjustable sidestop fence, fully illustrated user guide, screwdrivers, and mounting hardware.* The ACMTC Accessory Kit (#39770 - Sold Separately) includes eight 1/4" guides, four 3/8" guides, four 1/2" guides, eight-piece solid carbide spiral upcut bit set, and wood storage box.

    8 Review(s)
    $1049.00
  8. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …of mortises and tenons. Additional features:* Universal sub-base that attaches to virtually any plunge router* Joint guide stand* 5/16" HSS spiral upcut bit with 1/2" shank (Leigh No. 170-500)* Two F-Clamps* Adjustable sidestop fence for tenoning* 1/8" hex driver* Mounting hardware* Illustrated user…

    3 Review(s)
    $529.00
  9. Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    …centering gauge ensures router bit concentricity* Flat side on plunge base allows user to work in tighter spaces and provides a straight reference point* Motor transitions quickly between GripVac™ base (included), plunge base (included), and traditional spiral down bases (690 series) Product…

    6 Review(s)
    $279.99
  10. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to match the size of the indexing key.* Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

    60 Review(s)
    $79.99
  11. Freud Down-Spiral Router Bits - 1/4'' Shank

    Freud Down-Spiral Router Bits - 1/4'' Shank

    …The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2'' shank. Application: Grooves and dadoes in single-sided veneers and laminates.* Freud's solid carbide down spiral bits are ideal…

    From: $19.97
  12. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    …IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long. Technical Details:* Bits feature carbide tips for enhanced durability* Designed with spiraled flutes to allow for fast chip…

    2 Review(s)
    From: $21.99
  13. Rockler Inlay System

    Rockler Inlay System

    …and easier than ever. The clear acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template…

    4 Review(s)
    $54.99
  14. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    …portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit (75-102)* Overall Diameter: 1/4"* Carbide Height: 1"* Shank Diameter: 1/4"* Overall Length: 2-1/2" Up-Cut Spiral Bit (75-104)* Overall Diameter:…

    $159.97
  15. Circle/Grommet Templates

    Circle/Grommet Templates

    …(91372 and 22899).* Made of 1/4" acrylic.* Each template measures 10-7/8" square.* Use double-faced tape (50492) to adhere template to surface, or countersink some holes for screws.* Use with the 5/8" Short-Shank Guide Bushing (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    3 Review(s)
    $37.99
  16. Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    …bench to keep bits organized and protected. Solid carbide bits cut all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. * Create mortises and dadoes with chip-free top surfaces.* Solid carbide construction.* The Down Spiral Bit Set is an…

    $159.97
  17. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …to 1-1/4" deep. Features:* Mortises and tenons in sizes from 5/16" x 5/8" to 1-1/2" x 2-1/2"* Choice of three corner radii: 5/32", 1/4", or square (with chiseling)* 74-page fully illustrated user guide* Supplied with 1/2" HSS spiral upcut bit (Leigh No.180)* The M2 handles stock as thick as 1-1/2"

    $268.99
  18. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    …your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.* Designed for Blum hinges.* Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    10 Review(s)
    $17.99
  19. Festool Cutters for Domino® XL DF700 Joiner

    Festool Cutters for Domino® XL DF700 Joiner

    …the bits you already have. The bits are longer for the deep mortises of the XL Domino, and tipped with solid carbide for an incredibly long life and clean cuts. The spiral cut geometry is specially engineered for the Domino Joiner's unique oscillating cutpath. Technical Details:* Spiral flutes…

    From: $52.00
  20. Leigh Louver Spiral Upcut Bit

    Leigh Louver Spiral Upcut Bit

    1/4" high-speed steel (HSS) spiral upcut bit for use with the Leigh Louver Door Guide Set (33649, sold separately) on the Leigh FMT Frame Mortise and Tenon Jigs (sold separately). The 1/4" Louver bit has a 1/2" shank to stand up to the added forces of cross-grain routing. 3/4" cutter depth.

    $20.99
  21. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits

    From: $20.47
  22. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    …IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long. Technical Details:* Bits feature carbide tips for enhanced durability* Designed with spiraled flutes to allow for fast chip…

    1 Review(s)
    From: $36.99
  23. Festool DOMINO® DF 500 Q Joiner with SYS 2 T-Loc Systainer

    Festool DOMINO® DF 500 Q Joiner with SYS 2 T-Loc Systainer

    …different presets and infinite adjustability in between* A dust extraction port helps you extend the life of the Domino* Includes a carbide tip spiral bit that will withstand 5,000 to 14,000 joints depending on material* Switch between cutters in 30 seconds or less* SYS 2 T-Loc Systainer® has…

    $850.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X