Spiral Cut Router Bit

  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
  1. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $19.97
  2. Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  3. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  4. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  5. Onsrud Down-Cut Spiral Router Bits

    Onsrud Down-Cut Spiral Router Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  6. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  7. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    1 Review(s)
    From: $51.47
  8. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    Cut rows of perfectly fitted mortise and tenon joints! Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple…

    $268.99
  9. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    From: $20.47
  10. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to match the size of the indexing key.* Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

    60 Review(s)
    $79.99 $59.99

    SAVE 25%

  11. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  12. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  13. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  14. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    …bench to keep bits organized and protected. Solid carbide bits cut all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. * Create mortises and dadoes with chip-free top surfaces.* Solid carbide construction.* The Down Spiral Bit Set is an…

    $159.97
  15. Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    …the unsightly gaps that result from standard sized bits. Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    5 Review(s)
    $79.97
  16. Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    Porter-Cable Panel Pilot Router Bit - 1/4" Dia x 25/32" H x 1/4" Shank

    This Porter Cable 1/4" Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank…

    $9.99 $2.99

    SAVE 70%

  17. Freud® Single Flute Straight Router Bits - 1/4" Shank

    Freud® Single Flute Straight Router Bits - 1/4" Shank

    …ideal for cutting narrow grooves and channels, such as those for drawer bottoms. The bits cut all composition materials, plywoods, hardwoods and softwoods. Use them on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * This single flute Freud bit was designed…

    From: $11.47
  18. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $13.99
  19. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $14.49
  20. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    …most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life with minimal…

    11 Review(s)
    From: $13.99
  21. Freud® Double Flute Straight Router Bits - 1/2" Shank

    Freud® Double Flute Straight Router Bits - 1/2" Shank

    …straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    4 Review(s)
    From: $17.97
  22. Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    15 Review(s)
    From: $13.49
  23. Freud® Double Flute Straight Router Bits - 1/4" Shank

    Freud® Double Flute Straight Router Bits - 1/4" Shank

    …straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $14.97
  24. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    …useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises. These precision balanced router bits are made…

    $54.99
  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
Feedback X