Spiral Router Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
  1. Up-Cut Spiral Mortising Router Bits

    Up-Cut Spiral Mortising Router Bits

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  2. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    1 Review(s)
    From: $51.47
  3. Onsrud Down-Cut Spiral Bits

    Onsrud Down-Cut Spiral Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  4. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  5. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  6. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    From: $20.47
  7. Rockler Inlay System

    Rockler Inlay System

    …system makes it faster and easier than ever. The clear acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes…

    4 Review(s)
    $54.99
  8. End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit…

  9. Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    …centering gauge ensures router bit concentricity* Flat side on plunge base allows user to work in tighter spaces and provides a straight reference point* Motor transitions quickly between GripVac™ base (included), plunge base (included), and traditional spiral down bases (690 series) Product…

    6 Review(s)
    $279.99
  10. Freud Down-Spiral Router Bits - 1/4'' Shank

    Freud Down-Spiral Router Bits - 1/4'' Shank

    …and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $19.97
  11. Circle/Grommet Templates

    Circle/Grommet Templates

    …(91372 and 22899).* Made of 1/4" acrylic.* Each template measures 10-7/8" square.* Use double-faced tape (50492) to adhere template to surface, or countersink some holes for screws.* Use with the 5/8" Short-Shank Guide Bushing (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    3 Review(s)
    $37.99
  12. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  13. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that attaches to virtually any plunge router* Joint guide stand* 5/16" HSS spiral upcut bit with 1/2" shank (Leigh No. 170-500)* Two F-Clamps* Adjustable sidestop fence for tenoning* 1/8" hex driver* Mounting hardware*…

    3 Review(s)
    $529.00
  14. 3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    3-Piece Spiral Upcut Bit Set (Includes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits)

    The Onsrud spiral router bits are perfect for cutting mortises. The upcut design helps keep the mortise clear of chips and shavings while you cut. This high speed steel set includes 3 upcut bits: 1/4", 3/8" and 1/2".

    $71.97
  15. Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    …bench to keep bits organized and protected. Solid carbide bits cut all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. * Create mortises and dadoes with chip-free top surfaces.* Solid carbide construction.* The Down Spiral Bit Set is an…

    $159.97
  16. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    …your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.* Designed for Blum hinges.* Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.

    10 Review(s)
    $17.99
  17. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to match the size of the indexing key.* Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

    60 Review(s)
    $79.99
  18. Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit…

    0 Review(s)
  19. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …to 1-1/4" deep. Features:* Mortises and tenons in sizes from 5/16" x 5/8" to 1-1/2" x 2-1/2"* Choice of three corner radii: 5/32", 1/4", or square (with chiseling)* 74-page fully illustrated user guide* Supplied with 1/2" HSS spiral upcut bit (Leigh No.180)* The M2 handles stock as thick as 1-1/2"

    $268.99
  20. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …to a board and clamps to a bench.* No dedicated router is required!* Comes with universal sub-base that attaches to virtually all plunge routers, five 5/16" guides that will make over 20 sizes of mortise and tenon, guide stand, 5/16" spiral upcut cutter with 1/2" shank, two cam-action Speed-Clamps,…

    8 Review(s)
    $1049.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
Feedback X